Canon PIXMA TS8320 TS8300 series Getting Started Guide - Page 4

Setting Up the Printer 2 Remove the tape and film on the ink tank. b a • Check that no tape is left over. 3 Slowly remove the orange cap. • Important Do not squeeze the ink tank with the Y-shaped air hole blocked. • Do not touch the areas shown in red. 6 Repeat steps 2 through 5 to install all the ink tanks. • Check that all the colors appear. 7 Close the scanning unit / cover. • The printer will start initializing. a b Caution Watch your fingers. 5. Loading Paper 4 Install the ink tank. • Insert the ink tank into the print head and press down until it clicks. Check! Remove any orange tape. 1 Tap OK. 5 Check that the color of the ink tank you installed appears on the screen. 2 Remove the cassette from the printer and remove the cassette cover. Important If the color is not displayed on the screen even though you have installed the ink tank, the color of the ink tank may be wrong or you may have installed an ink tank, such as one with a different model number, that is not supported by this printer. Either install an ink tank for the correct color or use the provided ink tank for setup. 2 Cassette cover b a