Canon PIXMA iP1600 iP1600 Easy Setup Instructions - Page 1
Canon PIXMA iP1600 Manual
View all Canon PIXMA iP1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
1 Unpack the Printer 1 Carefully remove all items from the box. 2 Prepare the Printer Start Here Easy Setup Instructions 3 Install the FINE Cartridges Series Photo Printer 1 Remove the tapes from the printer as shown. The tape position is subject to change. 1 Open the Front Cover. The FINE Cartridge Holder automatically moves to the left. 6 Push up the FINE Cartridge until it clicks into place. IMPORTANT: For correct printer operation, make sure the FINE Cartridge is secure in slots. PIXMA iP1600 Photo Printer Power Cord PG-40 FINE Cartridges Photo Printer Series Quick Start Guide CL-41 Documentation and Software Kit Tapes 2 Open the Paper Support and the Front Cover, then remove the Protective Material on the right side. Serial Number 2 Write down the serial number. You will need this to register the product. 3 Remove the Color FINE Cartridge (CL-41) from its box. 7 Repeat the procedure for the Black FINE Cartridge (PG-40), inserting it into the left slot (B). Protective Material 3 Plug the Power Cord into the back of the printer and connect the other end to a power outlet. 4 Remove the Protective Tape gently. Power Cord Print Head Nozzles Electrical Contacts To the FINE Cartridge Holder Protective Tape 8 Close the Front Cover. NOTE: Do NOT connect the USB cable at this stage. 4 TURN THE PRINTER ON. The printer will initialize. Wait until the POWER lamp remains fully lit. NOTE: ·Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The printer may not print out properly if you touch it. ·Do not reattach the Protective Tape once you have removed it. ·Handle the removed Protective Tape carefully to avoid getting your hands dirty or staining surrounding work area. 5 Insert the Color FINE Cartridge slightly slanted into the right slot (C). NOTE: The printer will perform a Print Head Cleaning after the cover is closed. Wait until the process is complete before proceeding. Continue with Step 4 on side two.