Canon PIXMA iP3500 iP3500 series Easy Setup Instructions - Page 2

Windows® Software Installation Windows Note • The screens below refer to Windows Vista™ operating system Ultimate Edition (hereafter referred to as "Windows Vista") installation. Screens may vary depending on the operating system you are using. • Log into a user account with the administrator privilege. • Before installing the software, disable all anti-virus programs and automatically loading programs. • A message asking for your confirmation to restart your computer may appear during the installation process. If this message is displayed, follow the on-screen instructions and click OK. The installation resumes from where it left off when your computer has been restarted. • If the computer is restarted during installation, do not remove the Setup CD-ROM during restarting. a Be sure to TURN THE PRINTER OFF before continuing. (1) Press the POWER button. (2) Make sure that the POWER lamp stops flashing. b Turn the computer on and start Windows. Important If the Found New Hardware or Found New Hardware Wizard screen appears automatically, remove the USB cable connected to your computer. Click Cancel to quit the screen. In Windows Vista, the screen may close automatically when the USB cable is unplugged. Then turn off the printer and proceed from step c to install the printer driver. c Insert the Setup CD-ROM. The setup program should run automatically. In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to Step f. d If the AutoPlay screen appears, click Run Msetup4.exe. g When the list of applications to install appears, confirm the contents, click Install. Note Move the cursor over items to display explanations of each application. h Read the License Agreement carefully and click Yes. The software installation screen may appear during the installation process. Follow the on-screen instructions to install the software. i When the Printer Connection screen appears, connect one end of the USB cable to the computer, the other to the printer, then TURN THE PRINTER ON. The printer driver will begin identifying the printer port being used. Important If you cannot go to the next procedure after 2 minutes, refer to "Troubleshooting" instructions in the Quick Start Guide. Macintosh® Software Installation Macintosh Note • Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not supported, do not connect the printer to these. • The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using. • Log on as an Administrator. • Before installing the software, disable all anti-virus programs and automatically loading programs. a Connect one end of the USB cable to the computer, the other to the printer. Note Make sure the printer is turned on. ← To Computer USB When the Print Head Alignment Recommended screen appears, click Next. j When the Installation Results screen appears, click Next. k When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step l. After software installation is complete, double-click on the desktop . Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the printer. USB b Turn on your Mac and insert the Setup CD-ROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. c Double-click the Setup icon. d When the Authenticate screen appears, enter your administrator name and password. Click OK. If you do not know your administrator name or password, click , then follow the on-screen instructions. e When the main menu appears, click Easy Install. The printer driver, On-screen Manuals, and application software are installed automatically. j When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step k. After software installation is complete, double-click on the desktop. Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the printer. Serial Number k When the Installation completed successfully screen appears, click Restart. Remove the CD-ROM after clicking Restart and restarting the computer. Note Keep the CD-ROM in a safe place in case you need to reinstall the software. The system is restarted automatically. Note If straight lines are misaligned or print quality is not satisfactory after installing the printer driver, you may need to align the Print Head. Refer to "Aligning the Print Head" in the Quick Start Guide. Software installation is now complete. e If the User Account Control screen appears, click Continue. If the same screen reappears in subsequent steps, click Continue. f When the main menu appears, click Easy Install. The printer driver, On-screen Manuals, and application software are installed automatically. Serial Number l When the PIXMA Extended Survey Program screen appears, confirm the message. We would appreciate it if you would take part in this program regarding the use of Canon printers. If you can agree, click Agree. m When the Installation completed successfully screen appears, click Exit. If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Remove the CD-ROM after clicking Restart and restarting the computer. Note • If straight lines are misaligned or print quality is not satisfactory after installing the printer driver, you may need to align the Print Head. Refer to "Aligning the Print Head" in the Quick Start Guide. • Keep the CD-ROM in a safe place in case you need to reinstall the software. Note If you want to select particular items to install, click Custom Install and follow the onscreen instructions to proceed the installation. f When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. g Read the License Agreement carefully and click Yes. The software installation screen may appear during the installation process. Follow the on-screen instructions to install the software. h When the Print Head Alignment Recommended screen appears, click Next. i When the Setup Complete screen appears, click Next. Note If you want to select particular items to install, click Custom Install and follow the on- Software installation is now complete. screen instructions to proceed the installation. Part no. QT5-1248-V02 © 2007 Canon Inc. "Microsoft" is a registered trademark of Microsoft Corporation. "Windows" is a trademark of Microsoft Corporation, registered in the U.S. and other countries. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries. XXXXXXXX PRINTED IN VIETNAM