Canon PowerShot S100 Digital ELPH Software Starter Guide DC SD - Page 11
Connecting to a USB Port - instruction manual
View all Canon PowerShot S100 Digital ELPH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Windows 11 Connecting to a USB Port Requirements for the USB Interface • The USB interface can only be used to connect the camera to computers with Windows 98 or Windows 2000 preinstalled (clean installation). The USB ports on computers running versions of Windows 98 or Windows 2000 upgraded from Windows 3.1 or Windows 95, or versions of Windows 2000 upgraded from Windows 98 may not operate correctly. • Connect the USB cable directly to one of the computer's main USB ports. The interface may not function correctly if the camera is connected via a USB hub. • The interface may not function correctly while other USB devices, excluding USB mice and keyboards, are connected. If this problem arises, detach the camera and the other devices, and reconnect the camera only. • Do not attach more than one camera to the USB ports of the same computer at the same time. The cameras may not operate correctly. Important • Please do not place your computer into standby mode while the camera is connected to its USB port. If you place the computer into standby mode while the camera is connected to a USB port, do NOT disconnect the USB cable from the camera or computer. Try to revive the computer. If the USB cable is detached in standby mode, some computers may not return to active mode correctly. For instructions regarding the standby mode, please consult the manual accompanying your computer and operating software.