Canon PowerShot S3 IS PowerShot S3 IS Camera User Guide Advanced - Page 118
Shooting/Viewing Images on a TV set
View all Canon PowerShot S3 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Shooting/Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied Stereo/Video Cable STV-250N. 1 Turn off the camera and the TV. 2 Connect the Stereo/Video Cable to the camera's A/V OUT terminal. z With your fingernail on the left edge of the camera's DIGITAL terminal cover, pull it forward to open it, and plug the Stereo/Video Cable in all the way. 3 Plug the other ends of the Stereo/Video Cable into the VIDEO IN and AUDIO IN jacks on the TV. To the Video IN Jack Plug (Yellow) To the Audio IN Jack Plug (Left) (White) To the Audio IN Jack Plug (Right) (Red) 4 Turn on the TV and switch it to Video mode. 5 Power on the camera. z The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 32). The default setting varies between regions. - NTSC: Japan, U.S.A., Canada, Taiwan and others - PAL: Europe, Asia (excluding Taiwan), Oceania and others z If the video system is set incorrectly, the camera output may not display properly. 116