Canon PowerShot SD300 PowerShot SD300/200, DIGITAL IXUS 40/30 Camera User Guid - Page 136

IMPORTANT You must install the software and driver bundled on the supplied Canon Digital Camera Solution Disk onto your computer before connecting the camera to a computer. The camera will not operate correctly if you connect it to your computer before installing the driver and software. If this happens, please refer to the Troubleshooting section of the Software Starter Guide. • You do not need to turn off the camera or computer power when making a USB connection. • Please refer to your computer's manual for information regarding the location of the USB port. • You are recommended to use a fully charged battery pack or the AC Adapter Kit ACK-DC10 (sold separately) to power the camera when connecting to a computer (p. 21). • All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed. 1 Install the driver and the software applications bundled on the Canon Digital Camera Solution Disk (first time only). • Please see the Software Starter Guide for the installation procedures. • With a Macintosh, it is next necessary to set the ImageBrowser auto start settings. Please see the Software Starter Guide for details. 2 Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal. USB Port DIGITAL Terminal 134 Interface Cable