Canon PowerShot SD500 Direct Print User Guide - Page 18
Trim the image., Press the SET button to close the setting menu. - date stamp
View all Canon PowerShot SD500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the trimming frame beyond its maximum size 2 cancels the trimming setting. • When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the level of magnification. Moving the Trimming Frame • Move the trimming frame using the omni selector or the up, down, right and left buttons. Rotating the Trimming Frame • You can rotate the trimming frame by pressing the DISP. (or DISPLAY) button. 3 Press the SET button to close the setting menu. Pressing the MENU button cancels the settings. • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable). • The date or part of the date in images shot in [Date Stamp] mode with a camera that has the Postcard Print mode may not be printed properly depending on the trimming setting. 16