Canon PowerShot SD770 IS PowerShot SD770 IS / DIGITAL IXUS 85 IS Camera User G - Page 185

183 Subject in recorded image is too bright, or image flashes white. Subject is too close, making z Shoot with the subject within the the flash too strong. correct flash range when using the built-in flash (p. 205). The subject is overexposed z Set the exposure compensation to a because the surroundings negative (-) setting (p. 95). are too dark. z Use the AE Lock or spot metering functions (pp. 93, 96). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on. z Set the flash to (Flash off) (p. 62). Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 69). z In and modes, the ISO speed increases and noise can appear. White dots appear on the image. Light from the flash has z This is a phenomenon that occurs reflected off dust particles or with digital cameras and does not insects in the air. This is constitute a malfunction. particularly noticeable when shooting using the wide angle. Troubleshooting