Canon PowerShot SX280 HS User Guide - Page 178

Cannot determine access point • The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again. No access points found • Check to make sure that the access point is turned on. • When connecting to an access point manually, make sure that you entered the correct SSID. Incorrect Wi-Fi encryption key/Incorrect Wi-Fi security settings • Check the access point security settings (=134). IP address conflict • Reset the IP address so that it does not conflict with another. Disconnected/Receiving failed/Sending failed • You may be in an environment where Wi-Fi signals are obstructed. • Avoid using the camera's Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band. • Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices. • Check the connected device to make sure it is not experiencing errors. Sending failed Memory card error • If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help Desk. Receiving failed Insufficient space on card • There is not enough free space on the memory card to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space. Receiving failed Memory card locked • The write-protect tab of the memory card in the camera to receive the images is set to the locked position. Slide the write-protect tab to the unlocked position. Receiving failed Naming error! • When the highest folder number (999), and the highest image number (9999) have been reached on the receiving camera, images cannot be received. Insufficient space on server • Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space. • Save the images sent via a server (=143) on your computer. SSL certificate not valid Connect to a computer, use the supplied software to reset • Check to make sure the date/time settings on the camera are correct. After confirming that the settings are correct, follow the on-screen instructions and reset the settings. Check network settings • Check to make sure your computer can connect to the Internet with the current network settings. Cover Preliminary Notes and Legal Information Contents: Basic Operations Basic Guide Advanced Guide 1 Camera Basics 2 Using GPS Function 3 Auto Mode/ Hybrid Auto Mode 4 Other Shooting Modes 5 P Mode 6 Tv, Av, and M Mode 7 Playback Mode 8 Wi-Fi Functions 9 Setting Menu 10 Accessories 11 Appendix Index 178