Canon REALiS LCOS WUX10 Mark II Multimedia Projector WUX10 MarkII Users Manual
Canon REALiS LCOS WUX10 Mark II Manual
View all Canon REALiS LCOS WUX10 Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS LCOS WUX10 Mark II manual content summary:
- Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index ENG - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 2
Features of WUX10 MarkII Multimedia Projector Thank you for purchasing a Canon projector. The WUX10 MarkII Multimedia Projector (hereinafter referred to as "the projector") is a high-performance projector that is capable of projecting a high-resolution computer screen and high-quality digital image - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 3
Features of WUX10 MarkII Multimedia Projector Various Image Modes for a Particular Use of Your Projector When projecting a digital still photo image or an image that has been processed on an sRGB-compatible monitor, you can project the image with higher tone on the screen by incorporating the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 4
on how to use the projector. Read this manual thoroughly to make the most of your projector and ensure safety. Important Information and Quick Start Guide First read document. It provides information about projector safety, cautions, quick start guide*, cleaning and replacing the air filter and - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 5
(P95) Turning on the Projector by Connecting the Power Cord (P96) Disabling the Beep During the Operation (P96) Disabling Buttons (P97) Hiding Guide Messages (P98) Turning Off the Projector LED Lamps (P99) Setting a Password (P100) Producing a Presentation Blackened Out an Image Temporarily (P66 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 6
Table of Contents Features of WUX10 MarkII Multimedia Projector 2 Quick Reference Guide 5 Safety Instructions...11 Safety Precautions ...12 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE 13 AC Power Cord Requirement 15 Federal Communication Commission Notice 16 Canadian Radio Interference - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 7
PC Function 52 Adjusting the Image Size ...53 Adjusting the Focus ...54 ■ Auto focusing...54 ■ Manual focusing ...54 Adjusting Keystone Distortion 55 ■ Auto adjustment...55 ■ Manual adjustment ...55 ■ Resetting the Keystone Adjustment 56 Selecting Screen Aspect and Aspect 57 Selecting Screen - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 8
Table of Contents Adjusting the Volume ...67 Muting the Sound ...67 Zooming an Image ...68 Showing the Elapsed Time...69 Setting Functions from Menus 71 How to Use Menus ...72 ■ Menu Configuration...72 ■ Basic Operation of Menu 73 Setting Display Status 75 Selecting an Image Projection Mode 75 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 9
Channel 97 Selecting a Display Language 98 Showing/hiding the Guide Screen 98 Turning on/off LED Illumination 99 Extending the Menu ■ Error Notification Message 115 ■ Projector Control...116 Appendix ...117 Troubleshooting ...118 WARNING Lamp Flash Patterns 118 Symptoms and Solutions ...119 ■ - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 10
from a Computer 127 When Projecting an Image from Image Software 129 Supported Computer Signal Types 130 Relationship between Screen Size and Projecting Distance 131 ■ External View...137 ■ ANALOG PC-2/COMPONENT IN terminal 137 ■ Service Port (CONTROL 138 Index...139 Menu Configuration 143 10 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 11
. If your projector is not operating correctly, read this manual again, check operations and cable connections, and try the solutions shown in the "Troubleshooting" section at the end of this booklet. If the problem still persists, contact the service center or the dealer where you purchased the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 12
Safety Instructions Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR distances must be maintained. Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. SIDE and TOP REAR 1 m (3.3') 1 m (3.3') - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 13
■READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 14
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 15
Safety Instructions Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) 15 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 16
B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 17
Safety Instructions Safety Instructions Precautions on Handling the Batteries in the Remote Controller . • If a lamp explodes, its shards may scatter inside the projector. Ask the Canon service representative to clean and check the inside of the projector and replace the lamp. Caution If - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 18
Safety Instructions Disposal of Waste Lamp • Dispose of the projector's mercury lamp projector may be damaged or malfunctioned. • Do not transport the projector through a courier or transport service with the carrying bag. Put the projector in an impact-resistant transport case if such is the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 19
Safety Instructions Safety Instructions Caution When placing the projector on a castered Position the projector in a horizontal position. • Install the projector correctly. Incorrect installation may cause troubles and acci- dents. 20° • Do not tilt the projector more than 20 degrees above - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 20
20 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 21
Before Use Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 21 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 22
strap insertion hole at the bottom of the projector. • When the projector is not in use, attach the lens cap to protect the lens. z User's Manual (CD-ROM) z Warranty card z Important Information and Quick Start - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 23
of the projector from dust or scratches, and is not designed to protect the projector from external shocks. z User's Manual (CD-ROM) z Important Information and Quick Start Guide Before Use Cables Remote control • Wait until the cooling fan stops before putting the projector in the carrying bag - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 24
Part Names Main Unit of Projector ■Front Side Terminals and connectors Caution Be sure to remove the lens cap during projection. Failure to do so will result in fire hazards or cap deformation. Ranging window Do not place any obstacle between the projector and the screen, as the auto focusing - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 25
Before Use ■Bottom Side Lens cap strap Adjustable foot (P35) insertion hole (P22) Part Names Caution Do not block the air intake. Failure to do so will result in fire hazards or malfunctions. Air intake vent Lamp cover (P126) Air filter (P124) Screw holes for installation of ceiling-mount - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 26
< < < < Part Names Remote Control The projector can be operated using buttons on the remote control or the top control on the main unit. The remote control allows you to operate all functions of the projector. POWER button (P44, P64) Turns the projector on or off. ASPECT button (P62) Toggles - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 27
Part Names Before Use < AUTO SET button (P48) Performs input signal settings, auto adjustment on focusing, keystone distortion, screen color correction, and so on. INPUT button (P50) Switches among input signals. AUTO PC button (P52) Adjusts tracking and so on automatically in accordance with - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 28
the volume. [>]: Increases the volume. Selects the upper, lower, left or right item in the menu. WARNING lamp (P118) Flashes red when a problem has been detected on the projector. AUTO SET button (P48) Performs input signal settings, auto adjustment on focusing, keystone distortion, screen color - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 29
corresponding to the projected image signal. (6) VIDEO IN Terminal (P41) Receives a composite video signal from AV equipment. (7) Service port (CONTROL) Exclusively used by the service personnel (it is not used normally). (8) LAN port (P106) Connects a LAN cable. Used to connect the projector to - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 30
Preparing the Remote Control ■Installing Remote Control Batteries 1 Open the battery com- partment lid. Slide the lid with it pressed down. 2 Insert batteries. Insert new two AAA-size batteries in the compartment with the + and - poles positioned correctly. 3 Replace the compart- ment lid. • If - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 31
Projecting an Image Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 31 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 32
Steps for Setting Up the Projector and Projecting an Image Connecting the Projector to Equipment (P36) Turning on the Power (P44) Do you want to project an image from a notebook computer? Yes No For a notebook computer, turn on the monitor output (P46) and then go to Auto Setup. Performing the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 33
Setting Up the Projector ■Placing in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projections. • The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 34
as horizontal as possible. If you need to point the projector up (for example, when the screen is placed on a higher position), follow the instruction given in "When Pointing the Projector Up" on the following page. • Adjust the tilt of the projecting image using the rear adjustable foot. Make - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 35
Setting Up the Projector ■ When Pointing the Projector Up When the screen is placed on a higher position, point the projector up using the adjustable foot. You can point it up as far as 10 degrees. The keystone distortion of the projecting image can be corrected with the auto keystone (P47) or by - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 36
) HDMI IN terminal can be used to connect only AV equipment. DVI-I IN terminal can be used to connect only computer. AV equipment (P42) Service terminal (Reserved) Video AUDIO IN terminal VIDEO IN terminal LAN terminal Audio signal for each image input DIGITAL PC (P37, P38) ANALOG PC-1 AV - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 37
Projecting an Image Connecting the Projector Connecting the Projector to the Computer Connect the projector to the computer. Before connecting the cables, turn off both the projector and computer. The digital connection (P38) is recommended when projecting a WUXGA or UXGA image in high quality. ■ - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 38
Connecting the Projector BNC cable (Input signal type: [ANALOG PC-2] - P49) Computer mini D-sub 15-pin - BNC Terminal Convert Cable (commercial item) mini D-sub 15-pin - BNC Terminal Convert Cable (commercial item) Projector To ANALOG PC-2/ COMPONENT IN Monitor output terminal (mini D-sub 15- - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 39
Connecting the Projector ■Outputting Audio to Speakers It is possible to output sound of projected images to amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Commercial audio cable Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a built-in resistor. Using - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 40
cables, turn off both the projector and AV equipment. The description provided here is just examples. For more detailed information, refer to the manual for the connecting AV equipment. ■Connecting to Digital Video Output Terminal (digital connection) HDMI cable (Input signal type: [HDMI] - P49) AV - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 41
Projecting an Image Connecting the Projector ■Connecting to Analog Video Output Terminal (analog connection) Video cable (Input signal type: [VIDEO] - P49) AV equipment Projector RCA terminal Image output terminal Commercial video cable To VIDEO IN To input a corresponding audio signal: RCA - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 42
Connecting the Projector Supplied component cable (Input signal type: [COMPONENT] - P49) A Component video signal from AV equipment can be input to the projector by connecting the supplied component cable to the ANALOG PC-2/COMPONENT IN terminal of the projector. Use a commercial component cable - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 43
Connecting the Projector ■Outputting Audio to Speakers It is possible to output sound of projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Commercial audio cable Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a built-in - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 44
socket. • Connect the ground terminal on the power plug to ground. Otherwise, an electric shock may result or the computer may suffer electromagnetic radiation problems or be subject to poor reception by TV and radio. • Wait at least 5 minutes before turning on the projector when you turn off the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 45
Projecting an Image Starting Projection Changing Operations When Projector is Turned On You can change operations when the projector is turned on as follows: • You can turn on the projector by connecting the power cord without pressing the POWER button. (P96) • You can specify whether to enable or - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 46
The function keys you use and the method used to turn on the external monitor output vary depending on the model. For details, see the instructions of your notebook computer. 46 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 47
to select an appropriate input signal. (P50) • If focusing, keystone distortion and/or screen color correction have not been performed properly, manually adjust them. (Adjusting the focus: P54, Correcting keystone distortion: P55 and Correcting the screen color: P82) • If you select [16:9 D. image - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 48
Setting Up the Screen Automatically ■Performing the Auto Setup Press the AUTO SET button to perform the auto setup. Remote control Top control • After the auto setup is complete, the following window appears. Press the OK button. 48 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 49
not changed the input signal since the last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input signal HDMI Input terminal HDMI IN Types of connection cables HDMI cable (commercial - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 50
Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to pop up a window shown at the lower right. Remote control Top control The currently active input signal is marked with a circle and highlighted in orange. An input signal that is ready for projection is - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 51
Adjusting Image Setting the Display Resolution of the Computer Set the display resolution of the computer to "1920 x 1200 pixels" or a resolution closest to the output signal resolution of the computer based on the performance of the projector (resolution: 1920 x 1200 pixels). (P130) ■Windows - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 52
signal settings] select [Total dots], [Track- ing], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] to make adjustments. (P77 - P80) • For the signal types supported by the projector, see the table on page 130. 52 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 53
Projecting an Image < Adjusting Image Adjusting the Image Size Use the ZOOM button to adjust the size of the projecting image. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom function. (P33) 1 Press the ZOOM button to pop up a - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 54
the AUTO SET button. If you select [16:9 D. image shift] or [4:3 D. image shift] for [Screen aspect], the auto focus function will be disabled. ■Manual focusing 1 Press the FOCUS button to pop up a window shown at the lower right. Remote control Top control 2 Press the pointer buttons to adjust - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 55
other conditions. For the details, refer to the next page. ■Auto adjustment Press the D.SHIFT/KEYSTONE button, and then the AUTO SET button. ■Manual adjustment 1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. Remote control Top control 2 Press the pointer buttons - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 56
Adjusting Image 3 When the keystone distortion has been adjusted, press the OK button. ■Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the window, select [OK] with [ - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 57
Projecting an Image < Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection making best use of the screen size - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 58
Selecting Screen Aspect and Aspect < < 4 Use [ ] / [ ] to select a screen aspect type. Remote control Top control 16:10 Select this when you use a screen with aspect ratio of 16:10. Also, select this when you project an image on a wall. 16:9 Select this when you use a screen with aspect ratio - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 59
Projecting an Image < < Selecting Screen Aspect and Aspect ■Moving Image with 16:9 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button when [16:9 D. image shift] is selected for [Screen aspect] to pop up a window at the lower right. Remote control Top control < < 2 Use [ ] / [ ] to move the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 60
Selecting Screen Aspect and Aspect ■Moving Image with 4:3 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button when [4:3 D. image shift] is selected for [Screen aspect] to pop up a window at the lower right. Remote control Top control 2 Use [] to move the image. Remote control Top - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 61
Projecting an Image Selecting Screen Aspect and Aspect Selecting Aspect Ratio Select the aspect ratio of projecting image based on the input signal type, aspect ratio of the screen and resolution. For more details on the aspect ratios, refer to "When Projecting an Image from a Computer" on page 127 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 62
Selecting Screen Aspect and Aspect ■How to Select an Aspect Ratio Press the ASPECT button on the remote control to select an appropriate aspect ratio. The selection is toggled among types for aspect ratios by pressing the ASPECT button. For more details on the aspect ratios, refer to "When - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 63
Projecting an Image Selecting an Image Mode You can select an image mode depending on the projecting image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. (P86) ■Image modes Standard Select this to project - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 64
Turning Off the Projector 1 Press the POWER button to pop up a window shown at the lower right. Remote control Top control Press the POWER button again while the confirmation message is displayed. The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan starts. • You - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 65
Table of Contents Safety Instructions Useful Functions Available During a Presentation Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 65 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 66
Useful Functions Available During a Presentation Blackened Out an Image Temporarily Useful when: • You finished the presentation. • You want to divert attendees' attention from the screen. Remote control Freezing the Picture Useful when: • You want to perform a computer operation which is - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 67
Adjusting the Volume Useful Functions Available During a Presentation Muting the Sound Useful when: • You want to adjust the volume level of the projectors or external speaker. Remote control Useful when: • You want to temporality mute the unnecessary sound. • You want to immediately mute the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 68
Useful Functions Available During a Presentation Zooming an Image Useful when: • Zoom in an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the button. A part of the image is enlarged each time pressed. Remote control You can move the area - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 69
Showing the Elapsed Time Useful Functions Available During a Presentation Useful when: • You want to manage the proceedings of the presentation. Useful Functions Available During a Presentation Press the button to start counting. • The elapsed time is displayed at the lower right corner of the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 70
70 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 71
Setting Functions from Menus Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 71 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 72
How to Use Menus With a menu, you can set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into four tabs as follows: [Display settings] tab (P75) You can set the type of signal or the method of projection of the images input. [System settings] tab (P95) - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 73
■Basic Operation of Menu 1 Press the MENU button to display a menu window. Remote control Top control How to Use Menus 2 Use [] to select a tab. Remote control Top control < < • If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to the top. 3 Use [ - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 74
the adjustment volume. In a different screen (1) Example: Menu position 1. Press the OK button to display a different screen. 2. The follow the instruction on the screen. In a different screen (2) < < Example: Tracking 1. Press the OK button to display a different screen. 2. Use [ ] / [ ] to - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 75
Setting Up Functions from Menus Setting Display Status Selecting an Image Projection Mode [Aspect] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings Aspect You can select a projection mode corresponding to the aspect ratio of image. (P61) • Different contents are displayed for - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 76
to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. • For the signal types supported by the projector, see the table on page 130. Press the OK button to accept your setting and then press the MENU button. • [Auto] is - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 77
. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. • Refer to the User's Manual of your AV equipment connected to the projector to confirm the component signal type. Use [] to select a value. When you have completed the adjustment - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 78
Setting Display Status Adjusting Input Signal (ANALOG PC) - Tracking [Input signal settings] - [Tracking] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Adjust Input Signal (ANALOG PC) - Horizontal position [Input signal settings] - [Horizontal position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 79
Setting Display Status Adjust Input Signal (ANALOG PC) - Vertical position [Input signal settings] - [Vertical position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Adjust Input Signal (ANALOG PC) - Horizontal pixels [Input signal settings] - [Horizontal pixels] HDMI DIGITAL PC ANALOG PC - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 80
. • The signal level is select automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between [Normal] and [Expanded more detailed information, refer to the User's Manual of your AV equipment connected to the projector. 80 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 81
Select HDMI Over Scan [HDMI over scan] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings HDMI over scan You can select this as required when you project visual software with the HDMI signals. Setting Display Status Performing Progressive Processing [Progressive] HDMI DIGITAL PC ANALOG - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 82
Setting Display Status Selecting a Menu Position [Menu position] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings Menu position You can change the position of menu displayed. Correcting the Screen Color [Screen color] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 83
Reversing projection [Image flip H/V] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings Image flip H/V You can make this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Setting Display Status None (Normal image) Ceiling mounted - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 84
Setting Display Status No Signal Screen [User screen settings] - [No signal screen] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings User screen settings No signal screen You can display either of a black or blue screen when there is no input signal. Screen When Blank [User screen - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 85
Setting Display Status Selecting a Logo at Startup [User screen settings] - [Projector on] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Selecting Aspect Ratio of Screen [Screen aspect] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Display settings User screen settings Projector on You can display a - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 86
Setting the Image Quality Selecting an Image Quality [Image mode] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Image mode You can select an image mode suitable for the projecting image. You can select it also with the IMAGE button on the remote control. (P63) Press the OK button - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 87
Adjusting the Brightness [Brightness] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Brightness You can adjust the brightness of images. Setting the Image Quality Adjusting the Contrast [Contrast] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Contrast You can adjust - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 88
Setting the Image Quality Adjusting the Sharpness [Sharpness] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Sharpness You can adjust the sharpness of images. Making a Gamma Correction [Gamma] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Gamma You can correct the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 89
Setting the Image Quality Making Color Adjustment (HDMI) [Color adjustment] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Color adjustment You can adjust the color quality of images for each of primary colors, red, green and blue. Making Color Adjustment (DIGITAL PC/ ANALOG PC) [ - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 90
Setting the Image Quality Making Color Adjustment (COMPONENT/ VIDEO) [Color adjustment] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Color adjustment You can adjust the color depth and hue of images for each of primary colors, red, green and blue. Making Advanced Adjustment ( - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 91
Making Advanced Adjustment (Dynamic gamma) [Advanced adjustment] - [Dynamic gamma] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Advanced adjustment Dynamic gamma You can adjust the gradation representation of light and dark portions of an image automatically. Setting the Image - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 92
Setting the Image Quality Adjusting Fine Color Adjustment (6-axis color adjust) [Advanced adjustment] - [6-axis color adjust] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Advanced adjustment 6-axis color adjust You can make fine color adjustment with RGB (red, green, blue) and CMY - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 93
Setting the Image Quality Level L Select this if the ambient light source is a light bulb or bulb color fluorescent. M Select this if the ambient light source is a day white fluorescent. H Select this if the ambient light source is a daylight fluorescent. An Example of the Ambient Light Setting - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 94
Setting the Image Quality Resetting the Image Settings [Reset] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Image adjustment Reset You can reset the current image settings to the default settings. OK Cancel Resets the image settings. Cancels resetting of the image settings. Press the OK button - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 95
Setting Various Function Setting Auto Setup Function [Auto setup] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Auto setup You can select an items you want to enable in the auto setup function. Selecting the Power Management Mode [Power management mode] HDMI DIGITAL PC ANALOG PC - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 96
Setting Various Function Skip the POWER Button Operation [Direct power on] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Enabling/Disabling the Beep [Beep] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Direct power on You can turn on the projector only by connecting the power cable - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 97
Setting Various Function Prohibiting the Projector Operation [Key lock] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Key lock You can prohibit the operation of the projector from either the top control or remote control. Setting up the Remote Control Channel [Remote control] - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 98
Swedish Russian Dutch Finnish Norwegian Turkish Polish Hungarian Czech Danish Arabic Chinese (Simplified) Chinese (Traditional) Korean Japanese Off Hides the guide screen. On Shows the guide screen. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 99
Turning on/off LED Illumination [LED illumination] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings LED illumination You can select whether to enable or disable the LED illumination (P28). Setting Various Function Extending the Menu Display Time [Other settings] - [Menu display time] - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 100
Setting Various Function Setting a Password [Other settings] - [Password settings] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other settings Password settings Disables the projector unless the correct password is entered. Registering a Password [Other settings] - [Register - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 101
Resetting the Lamp Counter [Other settings] - [Lamp counter] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other settings Lamp counter You can reset the lamp counter that indicates the timing to replace the projector when you replace it. Do not reset the lamp counter except when you - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 102
Setting Various Function Over 2,000 hours Displayed in green, yellow and red bar. A message "Replace with the new lamp." appears when power is turned on. Turning On/Off the Network Function [Other settings] -[Network function] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 103
Initializing network settings [Other settings] -[Network setting initialization] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other settings Network setting initialization You can Initialize the network settings. Setting Various Function Resetting to the Default Setting [Other - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 104
Checking the Information of the Projector [Information] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO Information You can confirm the information about the signal types of the images projected and other projector-specific information. Information shown Item Model name Input signal Firmware Serial - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 105
Connecting the Projector to Network Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 105 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 106
Setting an IP Address It is possible to send an error notification e-mail (P115) from the projector to the computer when you connect the projector to the network. To connect via the network, an IP address must be assigned to the projector. Set an IP address by following the steps below. (The - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 107
Setting an IP Address 8 When you have specified the settings, click the [OK] button and then click the [OK] but- ton on the [Local Area Connection Properties] window to close it. ■Resetting the IP Address Setting of the Computer 1 Turn off the projector and remove the LAN cable. 2 Follow the step 3 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 108
. 2 Launch a web browser, enter "http://192.168.254.254" in the address bar, and press the Enter key. The password input screen appears. The supported web browsers is Microsoft Internet Explorer 6 or later. 3 In the password input screen, enter "root" for [User name] and "system" for [Password] and - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 109
Setting Network ■Setting the Network 1 In the menu screen, click [Password], input the new user name and password, and click the [OK] button. Setting items: [User name]: The user name for logging in the network [New password]: The new password [Confirm new password]: The password for - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 110
Setting Network 3 Click [Mail], enter appropriate values in the following field for the error report, and click the [OK] button. Setting items: [To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon copy - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 111
Setting Network 4 If the SMTP mail server authentication is required, click [Mail auth], enter appropriate values in the following field, and click the [OK] button. Select one of the following four authentication method in [Mail authentication]. Select [OFF] if the mail authentication is not - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 112
[Trap community]: The name of the community (user) to which the SNMP trap is sent What is the SNMP Agent Function? This projector supports the SNMP (Simple Network Management Protocol) agent function that monitors the status of the projector. SNMP consists of the manager (a monitoring tool, your - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 113
Setting Network • Filter message: it tells that the air filter has reached its replacement tim- ing. • Unknown: it tells that an unknown error was occurred. Make sure to install the SNMP manager program on your PC before using the SNMP agent function. Authentication and Encryption Protocols - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 114
Setting Network ■Resetting the Network Setting 1 Click [Initialize] in the menu screen. 2 Click the [OK] button when the following dialog box is displayed. If you want to restore to the factory setting from the projector, perform [Network setting initialization] from the menu. 114 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 115
The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 116
Setting Network ■Projector Control 1 Click the [Projector control] button on the network setting screen. The projector control screen appears. Controlled items: [Power]: Turn ON/OFF the projector (P44, P64) [Input]: Select an input signal (P49) [Aspect]: Select an aspect ratio (P57) [Image - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 117
Appendix Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index 117 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 118
Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red after the projector is turned off when there is a trouble in the projector. • Wait until the cooling fan stops and disconnect the power plug from the AC outlet before dealing with the trouble problem is - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 119
Troubleshooting Symptoms and Solutions ■You cannot turn on the projector. Cause signal type is incorrect. The BLANK function has been selected. No image is sent due to the problem in the computer. Countermeasure Check whether the projector is connected to the computer or AV equipment correctly. - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 120
Troubleshooting Cause The external monitor output is not set on the notebook used to perform this operation varies among computer manufacturers. For more detailed information, refer to the User's Manual that came with your computer. Check whether the dual screen (multi-display) mode is selected on - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 121
Troubleshooting ■The projected image is blur. Cause The image is out of focus. The distance to the screen is too short. The projector is not placed - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 122
Troubleshooting Cause The lamp has exploded (or it is defective). The operating temperature is inappropriate. Other reasons Countermeasure Check whether the lamp has exploded. If the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 123
cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 124
Maintenance Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 125
degrade. • Make sure to handle the lamp carefully and correctly since it may explode if it is scratched or shocked. If a lamp explodes, follow the instructions under "If a Lamp Explodes" on page 17. • Do not remove screws unless specified. 125 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 126
Maintenance ■Replacing the Lamp 1 Turn off the projector, disconnect the power plug from the AC outlet, and let the projector stand for at least 1 hour. 2 Loosen a screw with a flathead screw- driver and remove the lamp cover. 3 Loosen two screws, pull up the handle, and then remove the lamp. - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 127
Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P57) and aspect (P61). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type. - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 128
Relationship between Aspect and Screen Aspect Screen Screen Aspect Resolution of Com- Ratio Setting puter Screen WUXGA 16:10 WSXGA+, WSXGA 16:10 WXGA [4:3] 4:3 [4:3 D. image shift] UXGA 4:3 SXGA+, XGA, SVGA, VGA 4:3 SXGA 5:4 Object of Projection Project an image in a largest possible - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 129
Relationship between Aspect and Screen Aspect When Projecting an Image from Image Software To project an image such as an image shot by a TV set, commercially available DVD software, or video camcorder (input signal [HDMI], [VIDEO], [COMPONENT]), select an aspect ratio according to the image - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 130
.00 59.94 50.00 59.94 * Interlaced signal * The specifications in the table above are subject to change without notice. * This projector does not support any computer signal of which dot clock is 170 MHz or higher. * Use a full connected VGA cable in which all pins are connected; otherwise, an - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 131
Relationship between Screen Size and Projecting Distance Height Height 16:9/16:10 Screen size (diagonal) 4:3 Screen size Width 16:10 diagonal 16:10 Width Height 40" 86 54 50" 108 67 60" 129 81 70" 151 94 80" 172 108 90" 194 121 100" 215 135 110" 237 148 120" 258 162 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 132
interface for AV equipment. It can transmit non-compressed images and audio signals simultaneously. It supports digital contents copy-protected with the HDCP technology. The projector supports HDMI 1.3 standard (10-bit deep color). HDCP An abbreviation of High-bandwidth Digital Content Protection - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 133
Glossary Aspect (P61, P75, P127) The aspect ratio is the ratio of the horizontal dimension (width) to the vertical dimension (height) of a screen. It is expressed as "width : height." The following aspect ratios are normally used in Computer or AV equipment. [4:3] The aspect ratio for SXGA+ (1400 x - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 134
of image data. The gamma correction function works effectively when portions of an image are obscure because they are too light or dark. This projector supports manual gamma correction and dynamic gamma correction which performs the gamma correction automatically. 134 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 135
Gain (P89) A parameter that adjusts the reproduction range of a brightness signal from black to white within the image signal to naturally reproduce it on the screen. The reproducibility of the bright tone is mainly changed. Since you can adjust the gain for each RGB color in this projector, you can - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 136
Remote control, batteries for remote control, power cord, computer connection cable, component cable, carrying bag, lens cover, string for lens cover, User's Manual, and Warranty Card. * 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 137
■External View Specifications 41.4 mm (1.6") Appendix 61.5 mm (2.4") 336 mm (13.2") 114 mm (4.5") 48 mm (1.9") 284 mm (11.2") Screw Holes for installation of ceilingmount hanger (M4 x 6) 50 mm (2.0") 75 mm 75 mm (3.0") (3.0") 37 mm (1.5") 73 mm (2.9") 193 mm (7.6") 61.5 mm (2.4") ■ - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 138
Specifications ■Service Port (CONTROL) Pin assignment D-Sub 9-pin Communication format Communication mode: RS-232-C, asynchronous, half-duplex communication Communication speed:19,200 bps Character length: 8 bits Stop - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 139
38, 49, 132 DVI-I IN 37, 38, 49 Dynamic gamma 91 F Factory defaults 103 FOCUS 54 FREEZE 66 G Gain 89, 135 Gamma correction 88, 134 Guide 98 H HDCP 132 HDMI 40, 49, 132 HDMI IN terminal 29, 40 HDMI input level 80 HDMI over scan 81 Horizontal pixels 79 Horizontal position - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 140
Index Image mode 86 Image mode (Image quality 63 Information 72, 104 INPUT 50 Input signal select 76, 77 Input terminal 29 Connecting the projector to the computer 37 Connecting to AV equipment 40 Installation 18 IP address 106 K Key lock 97 Keystone 55 L LAMP 93 Lamp counter 101 Lamp - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 141
V Vertical pixels 80 Vertical position 79 VIDEO 41, 49, 132 VIDEO IN terminal 29, 41 VOL 67 W WARNING lamp 28, 118 Z ZOOM 53 Zoom (Aspect 61 Zoom (image size 53 Zooming an Image 68 Index Index 141 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 142
-CL09* • DVI digital cable Part No.: LV-CA29 * This part is used to hang the projector from a ceiling. For more detailed information, refer to the instruction manual that comes with the ceiling-mount hanger RS-CL07. 142 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 143
Menu Configuration The Display settings menu Aspect Input signal select DIGITAL PC/ANALOG PC P75 Auto * Full 16:9 4:3 True size VIDEO Full * 16:9 4:3 Zoom HDMI Auto * Full 16:9 4:3 Zoom True size COMPONENT Auto * Full 16:9 4:3 Zoom True size ANALOG PC P76 640 x 480 : 1920 x 1200 VIDEO P76 - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 144
Menu Configuration The Image adjustment menu Image mode COMMON P86 Standard * Presentation Movie sRGB DIGITAL PC/ANALOG PC P86 Photo Brightness P87 Contrast P87 Sharpness P88 Gamma P88 Color adjustment DIGITAL PC/ANALOG PC Color level ** Color temperature ** VIDEO/COMPONENT Color - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 145
Czech Italian Danish Spanish Arabic Portuguese Chinese Swedish (Simplified) Russian Chinese Dutch (Traditional) Finnish Korean Norwegian Japanese Turkish Guide Off P98 On * LED illumination Off P99 On * Other settings Menu display time Normal * Extended Password settings - Canon REALiS LCOS WUX10 Mark II | Multimedia Projector WUX10 MarkII Users Manual - Page 146
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga,
Table of Contents
Safety Instructions
Before Use
Projecting an Image
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Connecting the Projector to Network
Appendix
Index
ENG
MULTIMEDIA PROJECTOR
User’s Manual