Canon REALiS LCOS WUX5000 User Manual

Canon REALiS LCOS WUX5000 Manual

Get Canon REALiS LCOS WUX5000 PDF manuals and user guides View all Canon REALiS LCOS WUX5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon REALiS LCOS WUX5000 manual content summary:

  • Canon REALiS LCOS WUX5000 | User Manual - Page 1
    MULTIMEDIA PROJECTOR User's Manual / Installation Manual Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network
  • Canon REALiS LCOS WUX5000 | User Manual - Page 2
    to a network, as well as perform maintenance. Read this manual thoroughly to make the most of your projector. Installation of the projector should be performed by a qualified technician. Contact the Canon Customer Support Center for further information. Symbols of Button Operations The projector
  • Canon REALiS LCOS WUX5000 | User Manual - Page 3
    How to Use This Manual COPYRIGHT NOTICE Please note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected
  • Canon REALiS LCOS WUX5000 | User Manual - Page 4
    ) Turning on the Projector by Connecting the Power Cord (P121) Disabling the Beep During Operation (P122) Disabling Buttons (P123) Hiding Guide Messages (P126) Setting a Password (P128) Reducing the Lamp Brightness (P119) Displaying Test Pattern (P138) Selecting Audio In Terminal (P139) Producing
  • Canon REALiS LCOS WUX5000 | User Manual - Page 5
    Table of Contents Table of Contents How to Use This Manual 2 Quick Reference Guide 4 Safety Instructions ...12 Safety Precautions...13 CAUTION ON HANGING FROM THE CEILING 13 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE 14 AC Power Cord Requirement 16 Federal Communication Commission
  • Canon REALiS LCOS WUX5000 | User Manual - Page 6
    Table of Contents Connecting to AV Equipment 52 ■ Connecting to Digital Video Output Terminal (Digital Connection 52 ■ Connecting to Analog Video Output Terminal (Analog Connection 53 ■ Outputting Audio to Speakers 55 Starting Projection ...56 ■ When the Language Selection Screen Appears 57 ■
  • Canon REALiS LCOS WUX5000 | User Manual - Page 7
    Table of Contents Table of Contents Setting Functions from Menus 87 How to Use Menus ...88 ■ Menu Configuration ...88 ■ Basic Menu Operations 90 Setting Display Status 93 Selecting an Image Projection Mode 93 Automatic Display Adjustment (WX6000 / SX6000 94 Selecting an Input Signal Type (
  • Canon REALiS LCOS WUX5000 | User Manual - Page 8
    Control Channel Settings 124 Selecting a Display Language 125 Showing / Hiding the Guide Screen 126 Showing / Hiding the Input Status 127 Selecting the HDMI Input Setting 140 Checking Projector Information 141 Installation Manual (Installation and Maintenance 143 Installation ...145
  • Canon REALiS LCOS WUX5000 | User Manual - Page 9
    Table of Contents Table of Contents ■ Install facing in the correct direction 148 Installation Procedure 149 Selecting the Projection Method and Installation Location 150 ■ Ceiling Mounting or Rear Projection 150 ■ Adjusting the projection position when installed on the floor 150 Installing /
  • Canon REALiS LCOS WUX5000 | User Manual - Page 10
    Filter ...193 Cleaning the Air Filter...194 Replacing the Lamp 195 Replacement Lamp ...196 Replacing the Lamp ...196 Appendix 199 Appendix ...201 Troubleshooting...202 LED Indicator Meanings ...202 Symptoms and Solutions...203 ■ You Cannot Turn on the Projector 203 ■ You Cannot Project an Image
  • Canon REALiS LCOS WUX5000 | User Manual - Page 11
    the aspect ratio of the connected device........... 216 Displayed Test Patterns 217 Supported Signal Types 218 Product Specifications 219 ■ Projector ...219 ■ Remote ), ANALOG PC-1 (WX6000 / SX6000) / COMPONENT IN Terminal 223 ■ Service Port (CONTROL 224 Index ...228 Menu Configuration 232 11
  • Canon REALiS LCOS WUX5000 | User Manual - Page 12
    again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
  • Canon REALiS LCOS WUX5000 | User Manual - Page 13
    Safety Instructions Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended
  • Canon REALiS LCOS WUX5000 | User Manual - Page 14
    ■READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not
  • Canon REALiS LCOS WUX5000 | User Manual - Page 15
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions
  • Canon REALiS LCOS WUX5000 | User Manual - Page 16
    Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets the contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) 16
  • Canon REALiS LCOS WUX5000 | User Manual - Page 17
    B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake
  • Canon REALiS LCOS WUX5000 | User Manual - Page 18
    Safety Instructions Precautions for Use As this section contains important safety-related situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. • If smoke is
  • Canon REALiS LCOS WUX5000 | User Manual - Page 19
    Safety Instructions Safety Instructions Warning Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so could result in a
  • Canon REALiS LCOS WUX5000 | User Manual - Page 20
    Safety Instructions Warning Pay attention to the following points regarding an electric shock or burn. If inspection, maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including consumable parts) or the remote control
  • Canon REALiS LCOS WUX5000 | User Manual - Page 21
    Safety Instructions Safety Instructions Caution Pay attention to the following points regarding installation of the projector be performed. For details of maintenance costs, contact the Canon Customer Support Center. • When hanging the projector from a ceiling, put the projector down on the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 22
    to cool down sufficiently. Failure to do so could result in a burn or personal injury due to heat from the lamp or projector. • When an instruction to replace the lamp has been displayed (LAMP Indicator Displays (P39)), the possibility of the lamp breaking will increase. Replace the lamp with a new
  • Canon REALiS LCOS WUX5000 | User Manual - Page 23
    Safety Instructions Safety Instructions For Safe Use Pay attention to the following points when carrying or transporting the projector. • This projector is a precision by the user. Be sure to have the procedure performed by a qualified technician or contact the Canon Customer Support Center. 23
  • Canon REALiS LCOS WUX5000 | User Manual - Page 24
    Safety Instructions For Safe Use Pay attention to the following points when installing or using the projector. • Be sure to install the projection or downward projection, it is necessary to change the settings of the projector. For further details, contact the Canon Customer Support Center. 24
  • Canon REALiS LCOS WUX5000 | User Manual - Page 25
    Before Use 25 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index
  • Canon REALiS LCOS WUX5000 | User Manual - Page 26
    (1.8 m) for connection to a computer (part No.: YH7-2307) For Continental Eu- (mini D-sub 15-pin / mini D-sub 15-pin) rope For the U.S.A. and Canada  User's Manual / Installation Manual (CD-ROM)  Warranty Card  Important Information 26
  • Canon REALiS LCOS WUX5000 | User Manual - Page 27
    Before Use ■Installing Remote Control Batteries Supplied Accessories 1 2 Open the battery com- Insert batteries. partment lid. Insert 2 new AAA bat- Slide the lid while teries in the compart- pressing it down. ment with the + and - poles positioned cor- rectly. 3 Close the compartment
  • Canon REALiS LCOS WUX5000 | User Manual - Page 28
    Supplied Accessories Pay attention to the following points when handling the batteries. Failing to do so could result in a fire or personal injury. • Do not heat, short circuit or disassemble the batteries, or place them in a fire. • Do not attempt to recharge the batteries that are included with
  • Canon REALiS LCOS WUX5000 | User Manual - Page 29
    Before Use Preparing the Remote Control ■Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. (26.3') (26.3') • Use the remote control within a distance of approximately 8 m (26.3')
  • Canon REALiS LCOS WUX5000 | User Manual - Page 30
    Preparing the Remote Control ■When a remote control is connected using a cable (WX6000 / SX6000) The remote control for WX6000 / SX6000 (RS-RC05) can be used connected to the projector with a cable. Use a cable with a Ø3.5 mm stereo mini jack (not included). Terminal for wired remote control Ø3.5 mm
  • Canon REALiS LCOS WUX5000 | User Manual - Page 31
    Before Use Part Names Main Unit (The illustration shows WUX5000.) ■Front Side Power cord connector (P56) Side control (P38) Lens unit Air intake vent Terminals and connectors Infrared remote receiver (P29) Air filter (P193) Do not block the air intake. Doing so may cause a malfunction. Anti
  • Canon REALiS LCOS WUX5000 | User Manual - Page 32
    Part Names ■Rear Side ■Bottom Side Exhaust vent Do not block the air exhaust. Doing so may cause a malfunction. Lamp cover Infrared remote receiver (P29) Screw holes for installation of ceiling attachment Adjustable feet (P150) 32
  • Canon REALiS LCOS WUX5000 | User Manual - Page 33
    Depending on the installation environment, an extension pipe (part No.: RS-CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional ceiling attachment. • You should never install the ceiling attachment by yourself
  • Canon REALiS LCOS WUX5000 | User Manual - Page 34
    Part Names Remote Control The projector can be operated using buttons on the remote control or the side control on the main unit. The RS-RC04 remote control is included with WUX5000 / WUX4000 and the RS-RC05 remote control is included with WX6000 / SX6000. The remote control allows you to operate
  • Canon REALiS LCOS WUX5000 | User Manual - Page 35
    Part Names Before Use INPUT button (P60) Switches the input signal. LENS-SHIFT button (P74) Moves the lens up, down, left, or right. ZOOM button (P71) buttons: Move the lens. Adjusts the image size. [ ] / [ ] buttons: Increase the image size. [ ] / [ ] buttons: Decrease the image size.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 36
    Part Names ■ RS-RC05 POWER button (P56, P80) Turns the projector on or off. ASPECT button (P70) Changes the aspect ratio mode. Pointer buttons (P90) Selects the upper, lower, left or right item in the menu. Performs remote control channel settings when the remote control is used via the infrared
  • Canon REALiS LCOS WUX5000 | User Manual - Page 37
    Before Use Part Names AUTO PC button (P62) Adjusts tracking etc. automatically in accordance with the signal from a computer when the analog PC input is selected. Change input buttons (P60) Change the input signal between Digital PC, Analog PC-1, Analog PC-2, HDMI and Component. INPUT button (
  • Canon REALiS LCOS WUX5000 | User Manual - Page 38
    Part Names Side Control (1) LED indicators (P39) The projector status is shown by the LED indicators (off / on / flashing). For indicator status, refer to page 39. • POWER ON (green): Lights up or flashes when the power is on. • STAND BY (red) : Lights up or flashes during standby or when the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 39
    Before Use Part Names ■LED Indicator Displays The LED indicators flash or illuminate to indicate the operating status of the projector. : Off : Lit : Flashing LED indicator POWER ON (green) STAND BY (red) WARNING (red) LAMP (orange) TEMP (red) Operating status Power is not connected.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 40
    IN) (P51) Receives the digital content image signal (HDMI). Carries both video and audio signals across a single cable. (5)Service port (CONTROL) This terminal is used by servicing technicians. It is not used during ordinary use. (6)AUDIO IN terminal (AUDIO IN) (P47, P50, P53) Receives the audio
  • Canon REALiS LCOS WUX5000 | User Manual - Page 41
    IN) (P51) Receives the digital content image signal (HDMI). Carries both video and audio signals across a single cable. (5)Service port (CONTROL) This terminal is used by servicing technicians. It is not used during ordinary use. (6)Terminal for wired remote control (REMOTE) (P30) This terminal is
  • Canon REALiS LCOS WUX5000 | User Manual - Page 42
    42
  • Canon REALiS LCOS WUX5000 | User Manual - Page 43
    MULTIMEDIA PROJECTOR User's Manual (Operation) 43
  • Canon REALiS LCOS WUX5000 | User Manual - Page 44
    44
  • Canon REALiS LCOS WUX5000 | User Manual - Page 45
    Projecting an Image 45 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index
  • Canon REALiS LCOS WUX5000 | User Manual - Page 46
    Steps for Connecting the Projector and Projecting an Image Installation work should be performed by a qualified technician. Contact the Canon Customer Support Center for further information. Connecting the Projector to Equipment (P162) Starting Projection (P56) Do you want to project an image from
  • Canon REALiS LCOS WUX5000 | User Manual - Page 47
    User's Manual Projecting an Image Connecting the Projector Connecting the Projector to a Computer Connect the projector to the computer. A digital connection (P50) is recommended when projecting an
  • Canon REALiS LCOS WUX5000 | User Manual - Page 48
    Connecting the Projector Computer Projector Monitor output terminal (mini D-sub 15-pin) VGA cable (supplied) When inputting corresponding audio To ANALOG PC-1 / COMPONENT IN terminal AUDIO output terminal (AUDIO OUT) Audio cable (not included) To AUDIO IN terminal Connecting with VGA-DVI
  • Canon REALiS LCOS WUX5000 | User Manual - Page 49
    User's Manual Projecting an Image Connecting the Projector Connecting with a BNC cable (Input signal type: [Analog PC] (WUX5000 / WUX4000), [Analog PC-1] (WX6000 / SX6000) P59) Computer Mini D-sub
  • Canon REALiS LCOS WUX5000 | User Manual - Page 50
    Connecting the Projector ■Connecting to DVI Monitor Output Terminal (Digital Connection) Connecting with a DVI cable (Input signal type: [DVI-D] (Digital PC) - P59) Computer Projector Monitor output terminal (DVI terminal) DVI-D cable (not included) When inputting corresponding sound To DVI-D
  • Canon REALiS LCOS WUX5000 | User Manual - Page 51
    User's Manual Projecting an Image Connecting the Projector ■Connecting with a HDMI Cable (Input signal type: [HDMI] - P59) Computer Projector HDMI cable (not included) To HDMI IN terminal
  • Canon REALiS LCOS WUX5000 | User Manual - Page 52
    to AV Equipment Connect the projector and AV equipment. The description provided here is one example. For more detailed information, refer to the manual for the connected AV equipment. Before connecting the cables, turn off both the projector and AV equipment. ■Connecting to Digital Video Output
  • Canon REALiS LCOS WUX5000 | User Manual - Page 53
    User's Manual Projecting an Image Connecting the Projector ■Connecting to Analog Video Output Terminal (Analog Connection) Connecting with a component cable (Input signal type: [Component] - P59) A component video
  • Canon REALiS LCOS WUX5000 | User Manual - Page 54
    Connecting the Projector AV equipment RCA plug - RCA plug component cable (not included) Projector RCA component terminal D terminal Video output terminal To ANALOG PC-1 / COMPONENT IN terminal Component cable (not included) D terminal plug - RCA plug component conversion cable (not included)
  • Canon REALiS LCOS WUX5000 | User Manual - Page 55
    User's Manual Projecting an Image Connecting the Projector ■Outputting Audio to Speakers It is possible to output audio from the projected images to AV equipment or amplified
  • Canon REALiS LCOS WUX5000 | User Manual - Page 56
    Starting Projection 1 Check the connection between the projector and the computer or AV equipment. (P52 - P55) 2 Connect the power cord and make sure that the [STAND BY] indicator is lit (red). Connect the ground terminal on the power plug to ground. Not doing so could result in an electric shock.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 57
    User's Manual Projecting an Image 4 Turn on the computer or AV equipment power. Starting Projection Changing Operations When Projector is Turned On You can change operations when
  • Canon REALiS LCOS WUX5000 | User Manual - Page 58
    . • The function key you use and the method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 7, you can turn on image output by holding down the Windows logo key and pressing the [P] key. 58
  • Canon REALiS LCOS WUX5000 | User Manual - Page 59
    User's Manual Projecting an Image Selecting an Input Signal (INPUT) Select the input signal table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input signal Supported projectors Input terminal Types of connection cables HDMI
  • Canon REALiS LCOS WUX5000 | User Manual - Page 60
    Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to display the window shown below. Remote control Projector Remote control The currently active input signal is marked with a circle and highlighted in orange. An input signal that is ready for projection is
  • Canon REALiS LCOS WUX5000 | User Manual - Page 61
    User's Manual Projecting an Image Adjusting the Image Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the display resolution
  • Canon REALiS LCOS WUX5000 | User Manual - Page 62
    signal settings] select [Total dots], [Track- ing], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] to make adjustments. (P95 - P98) • For the signal types supported by the projector, see the table on page 218. 62
  • Canon REALiS LCOS WUX5000 | User Manual - Page 63
    User's Manual Projecting an Image Adjusting the Image Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the projected image (screen aspect) or an optimum
  • Canon REALiS LCOS WUX5000 | User Manual - Page 64
    Adjusting the Image 2 Use the [ ] / [ ] buttons to select the [Display settings] tab (WUX5000 / WUX4000) or [Install settings] (WX6000 / SX6000). Remote control Projector Remote control 3 Select [Screen aspect] with the [ ] / [ ], and then press the OK button. Remote control Projector Remote
  • Canon REALiS LCOS WUX5000 | User Manual - Page 65
    User's Manual Projecting an Image Adjusting the Image 4 Use the [ ] / [ ] buttons to select the desired contents. Remote control Projector Remote control Screen aspect compatibility for each model
  • Canon REALiS LCOS WUX5000 | User Manual - Page 66
    Adjusting the Image 16:10 Select this when you use a screen with aspect ratio of 16:10. Also, select this when you project an image on a wall. You can correct keystone distortion with this mode. (P76) 16:9 Select this when you use a screen with aspect ratio of 16:9. You can correct keystone
  • Canon REALiS LCOS WUX5000 | User Manual - Page 67
    User's Manual Projecting an Image Adjusting the Image Moving Image with 16:9 D. Image Shift / 16:10 D. Image Shift (SX6000) 16:10 D. image shift cannot be used for
  • Canon REALiS LCOS WUX5000 | User Manual - Page 68
    Adjusting the Image Moving Image with 4:3 D. Image Shift (WUX5000 / WUX4000 / WX6000) 4:3 D image shift cannot be used for SX6000. 1 For the WUX5000 / WUX4000, when the screen aspect is [4:3 D. image shift], if the D.SHIFT/KEYSTONE button is pressed, the screen below on the right is displayed.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 69
    User's Manual Projecting an Image Adjusting the Image Resetting the Image Shift Perform the following steps to reset the image shift adjustment. Press the D.SHIFT/KEYSTONE button (
  • Canon REALiS LCOS WUX5000 | User Manual - Page 70
    Adjusting the Image How to Select an Aspect Ratio Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the ASPECT button to change the aspect ratio type. For more details about aspect ratios, refer to page 207. Remote control Example: You can also select
  • Canon REALiS LCOS WUX5000 | User Manual - Page 71
    control or the LENS button on the projector twice in order to display the window shown below. Remote control Projector Push twice Remote control User's Manual Projecting an Image 71
  • Canon REALiS LCOS WUX5000 | User Manual - Page 72
    Adjusting the Image 2 Press the pointer buttons to adjust the image size. Remote control Projector Remote control Screen Use the [ ] button on the remote control, or the UP button on the projector to increase the image size. Use the [ ] button on the remote control, or the DOWN button on the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 73
    remote control or the LENS button on the projector in order to display the window shown below. Remote control Projector Remote control User's Manual Projecting an Image 2 Press the pointer buttons to adjust the focus. Remote control Projector Remote control Use the [ ] button on the remote
  • Canon REALiS LCOS WUX5000 | User Manual - Page 74
    Adjusting the Image Adjusting the Image Position To adjust the screen position up, down, left, or right, press the LENS-SHIFT button (WUX5000 / WUX4000) or SHIFT button (WX6000 / SX6000) on the remote control, or the LENS button on the projector. This function is referred to as "lens shift". It can
  • Canon REALiS LCOS WUX5000 | User Manual - Page 75
    2 Press the pointer buttons to adjust. Remote control Projector Adjusting the Image Remote control User's Manual Projecting an Image Screen 3 When the desired position is reached, press the OK button. ■Resetting the Position The lens position after movement with the lens
  • Canon REALiS LCOS WUX5000 | User Manual - Page 76
    Adjusting the Image Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button (WX6000 / SX6000) can be used to correct keystone distortion. • Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is too large to adjust, move the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 77
    Adjusting the Image Remote control [ ] button [ ] button Reduces the dimensions of the upper edge Reduces the dimensions of the lower edge User's Manual Projecting an Image Screen [ ] button Reduces the dimension of the left edge [ ] button Reduces the dimension of the right edge 3 When
  • Canon REALiS LCOS WUX5000 | User Manual - Page 78
    room. This image mode emphasizes color saturation. Photo/ sRGB Suitable for viewing images taken with a digital camera that supports sRGB in a moderately dark room. This image mode supports the sRGB standard. Video Suitable for watching video taken with a video camera in a moderately dark room
  • Canon REALiS LCOS WUX5000 | User Manual - Page 79
    User's Manual Projecting an Image Selecting an Image Mode ■How to Select an Image Mode Press the IMAGE button on the remote control to select. The image
  • Canon REALiS LCOS WUX5000 | User Manual - Page 80
    Turning Off the Projector 1 Press the POWER button to display the window shown below. Remote control Projector Remote control When this window is displayed, press the POWER button again to turn off the power. The lamp goes off, the [STAND BY] indicator starts flashing in red and the cooling
  • Canon REALiS LCOS WUX5000 | User Manual - Page 81
    Useful Functions Available During a Presentation Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix
  • Canon REALiS LCOS WUX5000 | User Manual - Page 82
    Useful Functions Available During a Presentation Temporarily Blacking Out an Image Useful when: • You have finished the presentation. • You want to divert attendees' attention from the screen. Remote control Freezing the Picture Useful when: • You want to perform a computer operation which is
  • Canon REALiS LCOS WUX5000 | User Manual - Page 83
    User's Manual Useful Functions Available During a Presentation Useful Functions Available During a Presentation Adjusting the Volume Muting the Sound Useful when: • You want to adjust the volume level
  • Canon REALiS LCOS WUX5000 | User Manual - Page 84
    Useful Functions Available During a Presentation Zooming an Image Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the + D.ZOOM button to enlarge a part of the image. Press the - D.ZOOM button to reduce the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 85
    User's Manual Useful Functions Available During a Presentation Useful Functions Available During a Presentation Showing the Elapsed Time Useful when: • You want to manage the timing of the presentation.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 86
    86
  • Canon REALiS LCOS WUX5000 | User Manual - Page 87
    Setting Functions from Menus Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 87
  • Canon REALiS LCOS WUX5000 | User Manual - Page 88
    How to Use Menus Use the menus to set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into 5 tabs as shown below. [Display settings] tab [System settings] tab You can set the type of signal You can set the operation of the projector. or the method of
  • Canon REALiS LCOS WUX5000 | User Manual - Page 89
    settings, refer to page 165. [Information] tab You can check information about the signal types of the images projected and other projector-specific information. User's Manual Setting Functions from Menus Contents of menu Menu items 89
  • Canon REALiS LCOS WUX5000 | User Manual - Page 90
    How to Use Menus ■Basic Menu Operations The menus shown below are for WUX5000. 1 Press the [MENU] button to display the menu window. Remote control Projector Remote control 2 Use the [ ] / [ ] buttons to select a tab. Remote control Projector Remote control • If the tab position is not
  • Canon REALiS LCOS WUX5000 | User Manual - Page 91
    3 Use the [ ] / [ ] buttons to select an item. Remote control Projector How to Use Menus Remote control User's Manual Setting Functions from Menus 91
  • Canon REALiS LCOS WUX5000 | User Manual - Page 92
    different screen (1) Example: Menu position 1. Select Menu position. 2. Press the OK button to display a different screen. 3. Then follow the instruction on the screen. Selecting from a different screen (2) Example: Tracking 1. Select Input signal settings. 2. Select Tracking. 3. Press the OK button
  • Canon REALiS LCOS WUX5000 | User Manual - Page 93
    Setting Display Status User's Manual Setting Functions from Menus Selecting an Image Projection Mode [Aspect] HDMI Digital PC Component Analog PC You can select a projection mode corresponding to the aspect
  • Canon REALiS LCOS WUX5000 | User Manual - Page 94
    then press the MENU button or EXIT button (WX6000 / SX6000). Select an input signal corresponding to the resolution of the computer. • For the signal types supported by the pro- jector, see the table on page 218. 94
  • Canon REALiS LCOS WUX5000 | User Manual - Page 95
    > [Total dots] Press the OK button to accept your setting and then press the MENU button. • [Auto] is the factory default. • Refer to the user's manual for the AV equipment connected to the projector to confirm the component signal type. Use [ ] / [ ] to select a value. When you have completed the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 96
    Setting Display Status Adjust Input Signal Type (Analog PC) Tracking [Tracking] HDMI Digital PC Component Analog PC You can fine-tune the timing for generating an image from the image signal. Adjusts the tracking when the image distorts or flickers. MENU > [Display settings]> [Input signal
  • Canon REALiS LCOS WUX5000 | User Manual - Page 97
    settings] > [Horizontal pixels] Use [ ] / [ ] to select a value. As the value increases, the screen moves upward. Use [ ] / [ ] to select a value. User's Manual Setting Functions from Menus Screen Screen When you have completed the adjustment, press the OK button to accept your setting and then
  • Canon REALiS LCOS WUX5000 | User Manual - Page 98
    the type of sig- nal sent from AV equipment is RGB. • The signal level is selected automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between [Normal] and 98
  • Canon REALiS LCOS WUX5000 | User Manual - Page 99
    space] HDMI Digital PC Component Analog PC Select the color space for the HDMI signal. MENU > [Display settings] > [HDMI color space] User's Manual Setting Functions from Menus MENU > [Input settings] > [HDMI color space] Auto RGB YCbCr Selects the optimal color format for the input HDMI
  • Canon REALiS LCOS WUX5000 | User Manual - Page 100
    Setting Display Status Select HDMI Over Scan [HDMI over scan] HDMI Digital PC Component Analog PC You can select this as required when you project visual software using an HDMI signal. MENU > [Display settings] > [HDMI over scan] Press the OK button to accept your setting and then press the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 101
    YCbCr422. • Select [Off] when flickers and horizontal lines are noticeable in media that has a lot of fast-moving action. User's Manual Setting Functions from Menus MENU > [Input settings] > [Progressive] Off On Auto Does not perform progressive processing. Performs progressive processing. This
  • Canon REALiS LCOS WUX5000 | User Manual - Page 102
    Setting Display Status Selecting a Menu Position [Menu position] HDMI Digital PC Component Analog PC You can change the position of menus displayed. When the menu has been moved to the desired position, press the OK, MENU or EXIT button (WX6000 / SX6000). MENU > [Display settings] > [Menu
  • Canon REALiS LCOS WUX5000 | User Manual - Page 103
    then press the MENU button or EXIT button (WX6000 / SX6000). • [Normal] is the factory default. MENU > [Install settings] > [Screen color] User's Manual Setting Functions from Menus Normal Greenboard Select this if a standard type of projection screen is used. The images are projected in a light
  • Canon REALiS LCOS WUX5000 | User Manual - Page 104
    Setting Display Status Reversing Projection [Image flip H/V] HDMI Digital PC Component Analog PC Select this setting if you want to hang the projector from the ceiling or project an image from behind the screen. MENU > [Display settings] > [Image flip H/V] Rear, Ceiling mounted Select this to
  • Canon REALiS LCOS WUX5000 | User Manual - Page 105
    User's Manual Setting Functions from Menus Normal projection (none) Ceiling mounted • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • If you flip the image, the keystone distortion adjustment will be reset
  • Canon REALiS LCOS WUX5000 | User Manual - Page 106
    Setting Display Status Screen When Blank [Screen when blank] HDMI Digital PC Component Analog PC You can display a black or blue screen and temporarily blank out the projected image by pressing the BLANK button on the remote control. MENU > [Display settings] > [User screen settings] > [Screen
  • Canon REALiS LCOS WUX5000 | User Manual - Page 107
    will be canceled. For more details, refer to page 66. • [Auto] may be automatically selected for the aspect depending on the screen aspect setting. User's Manual Setting Functions from Menus 16:10 16:9 4:3 16:10 D image shift (SX6000) Select this when you use a screen with an aspect ratio of 16
  • Canon REALiS LCOS WUX5000 | User Manual - Page 108
    Setting Display Status Adjusting Keystone Distortion [Keystone adjustment] HDMI Digital PC Component Analog PC Corrects keystone distortion. MENU > [Install settings] > [Keystone adjustment] Image Shift Adjustment [Digital image shift] HDMI Digital PC Component Analog PC Moves the position
  • Canon REALiS LCOS WUX5000 | User Manual - Page 109
    Selecting an Image Quality User's Manual Setting Functions from Menus Image Adjustment [Image mode] / sRGB Suitable for projecting images taken with a digital camera that supports sRGB in a moderately dark room. Supports the sRGB standard. Video Suitable for watching video taken with a
  • Canon REALiS LCOS WUX5000 | User Manual - Page 110
    Selecting an Image Quality (The screen is for the WUX5000.) Saving the Desired Image Quality [Create profile] HDMI Digital PC Component Analog PC Up to 5 combinations of image quality settings can be stored. The stored image quality can be selected as an image mode. MENU > [Image adjustment] >
  • Canon REALiS LCOS WUX5000 | User Manual - Page 111
    the brightness of images. MENU > [Image adjustment] > [Brightness] (The screen is for the WUX5000.) MENU > [Image adjustment] > [Brightness] User's Manual Setting Functions from Menus [ ] Increases the brightness of an image. [ ] Decreases the brightness of an image. When you have completed the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 112
    Selecting an Image Quality Adjusting the Contrast [Contrast] HDMI Digital PC Component Analog PC You can adjust the contrast of images. Adjust the difference between the light and dark parts of the image to produce an image with emphasized contrast or an image that is soft. MENU > [Image
  • Canon REALiS LCOS WUX5000 | User Manual - Page 113
    ] (The screen is for the WUX5000.) MENU > [Image adjustment] > [Sharpness] (The screen is for the WUX5000.) MENU > [Image adjustment] > [Gamma] User's Manual Setting Functions from Menus [ ] Increases the sharpness of an image. [ ] Decreases the sharpness of an image. When you have completed the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 114
    Selecting an Image Quality setting and then press the MENU button or EXIT button (WX6000 / SX6000). • The adjustment you have made is stored as adjusted values for the input signals and image mode of the current projection. • More detailed adjustment is possible by using the detailed gamma
  • Canon REALiS LCOS WUX5000 | User Manual - Page 115
    User's Manual Setting Functions from Menus Correcting the Image According to the Ambient Light [Ambient light] HDMI Digital PC Component Analog PC You can correct and more
  • Canon REALiS LCOS WUX5000 | User Manual - Page 116
    Selecting an Image Quality Noise Reduction [Noise reduction] HDMI Digital PC Component Analog PC You can reduce image noise. MENU > [Image adjustment] > [Advanced adjustment] > [Noise reduction] Dynamic Gamma [Dynamic gamma] HDMI Digital PC Component Analog PC You can adjust the gradation
  • Canon REALiS LCOS WUX5000 | User Manual - Page 117
    with RGB (red, green, blue) and CMY (cyan, magenta, yellow). MENU > [Image adjustment] > [Advanced adjustment] > [6-axis color adjust] User's Manual Setting Functions from Menus Off Disables the memory color correction function. L M H Specifies the intensity of the memory color correction in
  • Canon REALiS LCOS WUX5000 | User Manual - Page 118
    Selecting an Image Quality Detailed Gamma Correction [Fine-Tune Gamma] HDMI Digital PC Component Analog PC The four gamma curves (white, red, green, blue) can be adjusted. When the white curve is adjusted, the adjustment is also applied to the other three colors. This function allows more fine-
  • Canon REALiS LCOS WUX5000 | User Manual - Page 119
    User's Manual Setting Functions from Menus Reducing the Lamp Brightness [Lamp mode] HDMI Digital PC Component Analog PC Reducing the lamp brightness reduces power consumption and cooling
  • Canon REALiS LCOS WUX5000 | User Manual - Page 120
    Setting Various Functions Selecting the Power Management Mode [Power management mode] HDMI Digital PC Component Analog PC You can turn off the lamp or projector automatically in order to save power when the projector is not in use. MENU > [System settings] > [Power management mode] Exit If no
  • Canon REALiS LCOS WUX5000 | User Manual - Page 121
    least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off. User's Manual Setting Functions from Menus MENU > [System settings] > [Direct power on] Off You need to press the POWER button to turn on the projector. On You
  • Canon REALiS LCOS WUX5000 | User Manual - Page 122
    Setting Various Functions Enabling / Disabling the Beep [Beep] HDMI Digital PC Component Analog PC You can select whether a beep sounds or not when you operate the projector. MENU > [System settings] > [Beep] Key Repeat [Key repeat] HDMI Digital PC Component Analog PC By pressing and holding
  • Canon REALiS LCOS WUX5000 | User Manual - Page 123
    the power plug. Keep holding down the OK button until a beep sounds. The key lock will be unlocked. MENU > [System settings] > [Key lock] User's Manual Setting Functions from Menus Off Main unit Remote control Disables the key lock. Operation is not possible using the main unit. Use the remote
  • Canon REALiS LCOS WUX5000 | User Manual - Page 124
    Setting Various Functions Main Unit and Remote Control Channel Settings [Remote control] HDMI Digital PC Component Analog PC When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remote control so that each operates independently. For the WX6000
  • Canon REALiS LCOS WUX5000 | User Manual - Page 125
    Analog PC You can select the language in which the menus are displayed. MENU > [System settings] > [Language] Setting Various Functions User's Manual Setting Functions from Menus Use the buttons to select the menu language, then press the OK button. English German French Italian Spanish
  • Canon REALiS LCOS WUX5000 | User Manual - Page 126
    ] mode. (P82, P84) - When the positional lock (P139) is set to [On] (WX6000 / SX6000) MENU > [Install settings] > [On screen] > [Guide] Off Hides the guide screen. On Shows the guide screen. Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000
  • Canon REALiS LCOS WUX5000 | User Manual - Page 127
    PC Component Analog PC Set the type of equipment which is connected to the HDMI port. MENU > [System settings] > [HDMI In] User's Manual Setting Functions from Menus MENU > [System settings] > [HDMI In] MENU > [Install settings] > [On screen] > [Show input status] Off The input status is
  • Canon REALiS LCOS WUX5000 | User Manual - Page 128
    Setting Various Functions Setting a Password [Password settings] HDMI Digital PC Component Analog PC Disables the projector unless the correct password is entered. MENU > [System settings] > [Other settings] > [Password settings] SX6000, the password can be entered using a combination of the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 129
    User's Manual Setting Functions from Menus Registering a Password [Register password] HDMI Digital PC Component Analog PC You can register a password for starting projection. MENU > [System settings] > [Other
  • Canon REALiS LCOS WUX5000 | User Manual - Page 130
    Setting Various Functions Prohibiting Operation of the Lens [Lens Ctrl Lock] HDMI Digital PC Component Analog PC You can lock lens-related button operations. MENU > [System settings] > [Other settings] > [Lens Ctrl Lock] Off Focus, zoom, lens shift, and other lens-related operations are
  • Canon REALiS LCOS WUX5000 | User Manual - Page 131
    used. For details, refer to page 75. • The position which was adjusted by lens shift does not change when the power is turned off. User's Manual Setting Functions from Menus MENU > [Install settings] > [Lens shift Reset] Select [Lens shift Reset] and press the OK button. The following screen for
  • Canon REALiS LCOS WUX5000 | User Manual - Page 132
    Setting Various Functions Extending the Menu Display Time [Menu display time] HDMI Component Digital PC Analog PC The setting for the menu display time can be extended from the normal 10 or 30 seconds to 3 minutes. For the WUX5000 / WUX4000, if [Extended] is set, when pushing and holding a
  • Canon REALiS LCOS WUX5000 | User Manual - Page 133
    ] Setting Various Functions played when the temperature inside the projector is abnormally high. Screen • [Off] is the factory default. User's Manual Setting Functions from Menus MENU > [Install settings] > [On screen] > [Overheat warning display] Off The [High temperature warning] icon is not
  • Canon REALiS LCOS WUX5000 | User Manual - Page 134
    Setting Various Functions Reducing Flickering [Deflicker] HDMI Digital PC Component Analog PC This function adjusts the image display in order to reduce flickering in the projected image. MENU > [System settings] > [Other settings] > [Deflicker] Gamma Restore [Gamma restore] HDMI Digital PC
  • Canon REALiS LCOS WUX5000 | User Manual - Page 135
    User's Manual Setting Functions from Menus Lamp Warning Display [Lamp warning display] HDMI Digital PC Component Analog PC A message that advises you to change the lamp can
  • Canon REALiS LCOS WUX5000 | User Manual - Page 136
    Setting Various Functions Select [Lamp counter] and press the OK button to display the lamp counter. When the lamp hours are 2,700 hours to less than 3,000 hours, the message "Obtain a new lamp." appears when power is turned on. Select [Reset] and press the OK button. Over 3,000 hours Displayed
  • Canon REALiS LCOS WUX5000 | User Manual - Page 137
    User's Manual Setting Functions from Menus Filter Warning Display [Filter warning display] HDMI Digital PC Component Analog PC A message advising you to perform cleaning can be set
  • Canon REALiS LCOS WUX5000 | User Manual - Page 138
    Setting Various Functions Displaying Test Pattern [Test pattern] HDMI Digital PC Component Analog PC A test pattern for checking the resolution and color when installing the projector can be displayed. MENU > [Install settings] > [Test pattern] The following functions in the [Image adjustment]
  • Canon REALiS LCOS WUX5000 | User Manual - Page 139
    lock] HDMI Digital PC Component Analog PC Operation of installation related functions can be prohibited. MENU > [Install settings] > [Positional lock] User's Manual Setting Functions from Menus Off Audio in 1 Audio in 2 HDMI No audio is output. Outputs the audio signal that is inputted in
  • Canon REALiS LCOS WUX5000 | User Manual - Page 140
    Setting Various Functions Resetting to the Default Setting [Factory defaults] HDMI Digital PC Component Analog PC You can reset the menu item settings and restore the system settings to the factory defaults. MENU > [System settings] > [Other settings] > [Factory defaults] • This function does
  • Canon REALiS LCOS WUX5000 | User Manual - Page 141
    PC You can check information about the signal types of the images projected and other information. MENU > [Information] MENU > [Information] User's Manual Setting Functions from Menus Information shown Item Model name Input signal Firmware Serial No. IP address* Gateway address* E-mail sender
  • Canon REALiS LCOS WUX5000 | User Manual - Page 142
    142
  • Canon REALiS LCOS WUX5000 | User Manual - Page 143
    MULTIMEDIA PROJECTOR Installation Manual (Installation and Maintenance) Do not attempt installation yourself. Be sure to request installation from a qualified technician or contact the Canon Customer Support Center. 143
  • Canon REALiS LCOS WUX5000 | User Manual - Page 144
    144
  • Canon REALiS LCOS WUX5000 | User Manual - Page 145
    Installation 145 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index
  • Canon REALiS LCOS WUX5000 | User Manual - Page 146
    the lens unit should not be performed by the user. Be sure to have the procedure performed by a qualified technician or contact the Canon Customer Support Center. 146
  • Canon REALiS LCOS WUX5000 | User Manual - Page 147
    Installation Manual Installation Installation Precautions ■ Do Not Use in the Following Environments • Do not install ■ When Using the Projector at Altitudes Greater than 2,300 m Contact the Canon Customer Support Center if you intend to use this projector at altitudes of 2,300 m or higher. 147
  • Canon REALiS LCOS WUX5000 | User Manual - Page 148
    change the settings of the projector. If using the projector for upward or downward projection, please contact the Canon Customer Support Center. ˃ ˃ Upward projection: Inclination of the projector should be no more than 10° from the vertical axis. *2 ˃ ˃ Downward projection: Inclination
  • Canon REALiS LCOS WUX5000 | User Manual - Page 149
    Installation Manual Installation Installation Procedure Selecting the Projection Method and Installation Location (P150) Installing / Removing the Lens Unit (P151) Setting Up the Projector (P156) Connecting to AV
  • Canon REALiS LCOS WUX5000 | User Manual - Page 150
    Selecting the Projection Method and Installation Location ■Ceiling Mounting or Rear Projection You can mount the projector on the ceiling (ceiling mounting) with it turned upside down or place it behind the screen (rear projection) if you use a translucent screen. Ceiling Mounting Rear Projection
  • Canon REALiS LCOS WUX5000 | User Manual - Page 151
    Installation Manual Installation Installing / Removing the Lens Unit ■Installing the to install or remove the lens unit yourself. Be sure to request this service from a qualified technician or contact the Canon Customer Support Center. • When installing and removing the lens unit, be sure not to
  • Canon REALiS LCOS WUX5000 | User Manual - Page 152
    Installing / Removing the Lens Unit 2 Loosen the cosmetic panel screw, then slide the cosmetic panel toward the rear to remove it. The cosmetic panel screw is attached to the cosmetic panel and designed to prevent it from falling off. 3 In order to prevent damage, close the lamp cover and
  • Canon REALiS LCOS WUX5000 | User Manual - Page 153
    Installation Manual Installation Installing / Removing the Lens Unit 5 Then turn the projector back over and remove the sleeve. 6 Referring to the following illustration, insert the lens connector
  • Canon REALiS LCOS WUX5000 | User Manual - Page 154
    Installing / Removing the Lens Unit 8 Insert the projector lens cable into the connector until a click sound is heard. 9 Reinstall the sleeve, cosmetic panel, and lamp cover in their original positions. When the power is first turned on after the lens unit has been installed or replaced, lens shift
  • Canon REALiS LCOS WUX5000 | User Manual - Page 155
    Installation Manual Installation Installing / Removing the Lens Unit ■Removing the Lens Unit 1 Perform steps 1 to 5 on pages 151 - 153 and remove the sleeve. 2 Disconnect the lens cable
  • Canon REALiS LCOS WUX5000 | User Manual - Page 156
    Setting Up the Projector ■Positioning the Projector in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projection. • The screen must not be exposed to direct sunlight or light from lighting equipment.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 157
    Installation Manual Installation Setting Up the Projector WUX5000 / WUX4000 Lens unit Standard Zoom Lens RS-IL01ST Long Zoom Lens RS-IL02LZ Short Fixed Lens RS-IL03WF Ultra
  • Canon REALiS LCOS WUX5000 | User Manual - Page 158
    Setting Up the Projector WX6000 Lens unit Diagonal when 16:10 40 60 80 100 150 200 Standard Zoom Lens 250 RS-IL01ST 300 350 400 450 500 550 600 40 60 80 100 150 200 Long Zoom Lens 250 RS-IL02LZ 300 350 400 450 500 550 600 40 60 80 Short Fixed Lens 100 RS-IL03WF
  • Canon REALiS LCOS WUX5000 | User Manual - Page 159
    Installation Manual Installation Setting Up the Projector SX6000 Lens unit Standard Zoom Lens RS-IL01ST Long Zoom Lens RS-IL02LZ Short Fixed Lens RS-IL03WF Ultra long
  • Canon REALiS LCOS WUX5000 | User Manual - Page 160
    Setting Up the Projector ■Lens Shift Function The projector includes a lens shift function. Operation of the buttons slides the lens up, down, left, and right, moving the image position. For the function operations, refer to page 74. The amount of lens shift is indicated as a percentage relative
  • Canon REALiS LCOS WUX5000 | User Manual - Page 161
    Amount movable in left/right direction ˃ (3) Setting Up the Projector ˃ Installation Manual Installation At maximum leftward lens shift At maximum rightward lens shift Area where lens movement is not possible With the Standard Zoom Lens, Long Zoom
  • Canon REALiS LCOS WUX5000 | User Manual - Page 162
    HDMI HDMI IN terminal AV equipment (P52) Digital video camera* (P52) Computer (P51) * Select playback mode before connecting. LAN terminal Network (P166) Service port (not normally used) AUDIO IN terminal AUDIO OUT terminal Audio signal for each image input Analog PC / (P47, P49, Component P53
  • Canon REALiS LCOS WUX5000 | User Manual - Page 163
    P52) DVI-I IN terminal can only be used to connect to a PC. Computer (P51) * Select playback mode before connecting. Installation Manual Installation Service terminal (not normally used) LAN terminal Network (P166) Remote terminal AUDIO IN terminal AUDIO OUT terminal Remote control (RC-RC05
  • Canon REALiS LCOS WUX5000 | User Manual - Page 164
    Connecting to AV Equipment ■Connection Terminal and Connection Cable Input signal HDMI Supported projectors WUX5000 WUX4000 WX6000 SX6000 Input terminal Types of connection cables HDMI cable (not included) Digital PC WUX5000 WUX4000 WX6000 SX6000 DVI cable (not included) 
  • Canon REALiS LCOS WUX5000 | User Manual - Page 165
    Connecting to a Network Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 165
  • Canon REALiS LCOS WUX5000 | User Manual - Page 166
    IP address does not overlap with other computers that are on the same LAN. When you set the IP address of the projector, follow the instruction on page 177 on the web screen or refer to page 175. • When you connect the computer to the network for the first time, it
  • Canon REALiS LCOS WUX5000 | User Manual - Page 167
    Installation Manual Connecting to a Network Preparing the Remote Control Setting an IP Address Following is an explanation of how to set the PC IP address for each
  • Canon REALiS LCOS WUX5000 | User Manual - Page 168
    Preparing the Remote Control ■Windows Vista 1 From the PC [Start] menu, select [Control Panel]. 2 Click on [View network status and tasks]. 3 From the menu on the left side of the window, click on [Manage network connections]. 4 Right-click [Local Area Connection], and open [Properties]. 5 Select [
  • Canon REALiS LCOS WUX5000 | User Manual - Page 169
    Installation Manual Connecting to a Network Preparing the Remote Control ■Windows XP 1 From the PC [Start] menu, select [Control Panel]. 2 Select [Network and Internet Connections] and open [Network
  • Canon REALiS LCOS WUX5000 | User Manual - Page 170
    Preparing the Remote Control ■Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the System Preferences window, click [Network] to display the Network window. 3 Select [Built-in Ethernet] and click the [TCP/IP] tab. Make a note of the original net- work settings (IP address, subnet
  • Canon REALiS LCOS WUX5000 | User Manual - Page 171
    lock / unlock the network settings so that they cannot be changed and cancel the lock. MENU > [Network Setting] > [Network Setting lock] Installation Manual Connecting to a Network Unlock Cancels the lock and allows other network settings to be changed. The password must be entered in order to
  • Canon REALiS LCOS WUX5000 | User Manual - Page 172
    Network Settings on the Projector Forcibly canceling the network lock In the Network Password Input screen, press the buttons in the following sequence to cancel the lock: [ ] [OK] [ ] [OK] [ ] [OK]. This will reset the network password to Turning the Network Function On / Off You can turn the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 173
    > [Network Password setting] Registering a Network Password Register the projector network password. MENU > [Network Setting] > [Register Network Password] Installation Manual Connecting to a Network Off A network password is not used. On A network password is used. Press the OK button to accept
  • Canon REALiS LCOS WUX5000 | User Manual - Page 174
    conforms to Class 1 as defined in the PJLink standards of the JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming to the PJLink standard Class 1 definition. • For
  • Canon REALiS LCOS WUX5000 | User Manual - Page 175
    . MENU > [Network Setting] > [DHCP] TCP / IP Setting Configure the projector TCP / IP settings. MENU > [Network Setting] > [TCP/IP setting] Installation Manual Connecting to a Network Off Disables the DHCP function. TCP / IP settings are possible. On Enables the DHCP function. Searches the DHCP
  • Canon REALiS LCOS WUX5000 | User Manual - Page 176
    Network Settings on the Projector Initializing Network Settings You can initialize the projector network settings. MENU > [Network Setting] > [Network setting initialization] When [Network setting initialization] is selected, the window shown below appears. Select [YES] then press the OK button. •
  • Canon REALiS LCOS WUX5000 | User Manual - Page 177
    Installation Manual Connecting to a Network Configuring the Network From the Computer ■Displaying and Configuring the Network Configuration Screen The web browser screen shown below is for the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 178
    Configuring the Network From the Computer The following information is displayed. Projector name The name of the projector on the network Location The location of projector installation MAC address The MAC address of the projector IP address The IP address of the projector Power Status
  • Canon REALiS LCOS WUX5000 | User Manual - Page 179
    Installation Manual Connecting to a Network Configuring the Network From the Computer 5 Select the function to set from the menu (1), then enter the setting in the displayed field (2)
  • Canon REALiS LCOS WUX5000 | User Manual - Page 180
    Configuring the Network From the Computer ■Resetting to Factory Defaults 1 Perform steps 1 - 3 on page 177 to display the setting window. 2 Click [Initialize]. 3 A confirmation window appears. Click [OK]. ■Setting Errors When a setting-related error occurs, the error name is displayed on the screen,
  • Canon REALiS LCOS WUX5000 | User Manual - Page 181
    to the POP3 server attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test mail failed due to at the same time from multiple computers. Installation Manual Connecting to a Network 181
  • Canon REALiS LCOS WUX5000 | User Manual - Page 182
    Setting Up the Network ■Setting Basic Information [Network] From [Network] in the settings window, you can log into the web screen and set basic network information. For the setting procedure, refer to page 177. Item Password User name New password Confirm new password TCP/IP DHCP IP address Subnet
  • Canon REALiS LCOS WUX5000 | User Manual - Page 183
    the settings window, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to page 177. Installation Manual Connecting to a Network Item To: Cc: From: SMTP server IP address SMTP server port number SNTP server IP address Time zone Mail resend interval
  • Canon REALiS LCOS WUX5000 | User Manual - Page 184
    Setting Up the Network ■Mail Authentication Settings [Mail auth] From [Mail auth] in the settings window, you can configure the settings for authentication of mail that is sent when an error occurs. For the setting procedure, refer to page 177. Item Mail authentication User name Password Confirm
  • Canon REALiS LCOS WUX5000 | User Manual - Page 185
    can configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol). For the setting procedure, refer to page 177. Installation Manual Connecting to a Network 185
  • Canon REALiS LCOS WUX5000 | User Manual - Page 186
    Setting Up the Network Item SNMP Receive community Password Confirm password SNMP trap Trap IP address Trap community Explanation Factory default setting Select the SNMP function version. If OFF is OFF selected, the SNMP function will be turned off and the other settings in this window cannot
  • Canon REALiS LCOS WUX5000 | User Manual - Page 187
    projector management on a network. For the setting procedure, refer to page 177. For information about PJLink, refer to page 174. Installation Manual Connecting to a Network PJLink Item PJLink authentication Password Confirm password Explanation Turn the PJLink function on or off. If OFF is
  • Canon REALiS LCOS WUX5000 | User Manual - Page 188
    Controlling the Projector from a Computer When the projector is connected to a network, it is possible to control the projector from a computer via the network. 1 Turn on the computer and projector. 2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter
  • Canon REALiS LCOS WUX5000 | User Manual - Page 189
    Controlling the Projector from a Computer 5 The projector control screen appears. The projector can be controlled from this screen. Installation Manual Connecting to a Network Item Projector name IP address Refresh Power Input Aspect Image mode Blank Mute Auto PC Information Explanation The name
  • Canon REALiS LCOS WUX5000 | User Manual - Page 190
    high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the Error Code in hexadecimal numbers* * For details, contact the Canon Customer Support Center. 190
  • Canon REALiS LCOS WUX5000 | User Manual - Page 191
    Maintenance 191 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index
  • Canon REALiS LCOS WUX5000 | User Manual - Page 192
    cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is easily damaged, so do
  • Canon REALiS LCOS WUX5000 | User Manual - Page 193
    . First insert the air filter tab into the groove on the handle side of the frame, then press the air filter into the frame. Installation Manual Maintenance 193
  • Canon REALiS LCOS WUX5000 | User Manual - Page 194
    filter will not work properly. • When the lamp is replaced, it is recommend that you also replace the air filter. • Contact the Canon Customer Support Center for further information. • Replacement air filter part No.: RS-FL01 • This can also be purchased from the Canon home page (http://store.canon
  • Canon REALiS LCOS WUX5000 | User Manual - Page 195
    counter] in the [System settings] menu. (P135) • This screen is not displayed when [Lamp warning display] is set to [Off]. (WX6000 / SX6000) (P135) 195 Installation Manual Maintenance
  • Canon REALiS LCOS WUX5000 | User Manual - Page 196
    since it may break during use if it has been scratched or subjected to impact. If the lamp breaks, contact the Canon Customer Support Center or follow the instructions on page 21 and page 22. • When replacing the lamp, do not remove any screws other than those specified. Replacing the Lamp 1 Turn
  • Canon REALiS LCOS WUX5000 | User Manual - Page 197
    . 6 Turn on the power. Bring up the menu and select [System settings] - [Other settings] - [Lamp counter]. (The screen is for the WUX5000 / WUX4000.) 197 Installation Manual Maintenance
  • Canon REALiS LCOS WUX5000 | User Manual - Page 198
    screen is for the WUX5000 / WUX4000.) • It is recommended that you also replace the air filter when you replace the lamp. • Contact the Canon Customer Support Center for further information. • Replacement air filter product number: RS-FL01 198
  • Canon REALiS LCOS WUX5000 | User Manual - Page 199
    MULTIMEDIA PROJECTOR Appendix 199
  • Canon REALiS LCOS WUX5000 | User Manual - Page 200
    200
  • Canon REALiS LCOS WUX5000 | User Manual - Page 201
    Appendix 201 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index
  • Canon REALiS LCOS WUX5000 | User Manual - Page 202
    Troubleshooting LED Indicator Meanings When there is a problem with the projector, the LED indicator same warning occurs again, there may be a malfunction in the projector. Contact the Canon Customer Support Center. WARNING and Faulty lamp LAMP are lit. The lamp does not illuminate. Turn the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 203
    Troubleshooting LED indicator status WARNING (only) flashes 6 times repeatedly. WARNING (only) flashes 3 times repeatedly. Meaning Faulty lens connector Filter error Countermeasure Disconnect the lens connector which joins the lens unit and projector. Contact the Canon Customer Support Services
  • Canon REALiS LCOS WUX5000 | User Manual - Page 204
    Troubleshooting Cause Connection with the input terminal has not been performed correctly. No input signal type has been selected for the connected AV equipment. The input signal type is incorrect. The BLANK function has been selected. No image is projected due to a problem to the manual that came
  • Canon REALiS LCOS WUX5000 | User Manual - Page 205
    Troubleshooting ■The Projected Image Is Blurred Cause Countermeasure The image is out of focus. Adjust the focus. (P73) The distance to the screen is too short.
  • Canon REALiS LCOS WUX5000 | User Manual - Page 206
    Troubleshooting Cause The lamp has broken (or there is a lamp malfunction). The operating temperature is inappropriate. Countermeasure Check whether the lamp has broken. If the lamp has broken, follow the instructions sea level, contact the Canon Customer Support Center. ■You Cannot Operate the
  • Canon REALiS LCOS WUX5000 | User Manual - Page 207
    Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P63) and aspect (P69). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type. •
  • Canon REALiS LCOS WUX5000 | User Manual - Page 208
    Relationship between Aspect and Screen Aspect ■When the image is projected on a 16:9 screen Aspect ratio of Screen aspect setting connected device (P63) Aspect setting (P69) (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [16:9] [16:9 D. image shift] [16:9] [16:9] [
  • Canon REALiS LCOS WUX5000 | User Manual - Page 209
    Relationship between Aspect and Screen Aspect ■When projecting on a 16:10 screen in the aspect ratio of the connected device Aspect ratio of Screen aspect setting connected device (P63) (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [16:10] Aspect setting (P69) [Full
  • Canon REALiS LCOS WUX5000 | User Manual - Page 210
    Relationship between Aspect and Screen Aspect ■When projecting on a 4:3 screen in the aspect ratio of the connected device Aspect ratio of Screen aspect setting connected device (P63) (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [4:3] [4:3 D. image shift] Aspect
  • Canon REALiS LCOS WUX5000 | User Manual - Page 211
    Relationship between Aspect and Screen Aspect ■When the image is projected on a 16:9 screen Aspect ratio of Screen aspect setting connected device (P63) Aspect setting (P69) (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [16:9] [16:9 D. image shift] [16:9] [16:9] [
  • Canon REALiS LCOS WUX5000 | User Manual - Page 212
    Relationship between Aspect and Screen Aspect ■When projecting on a 16:10 screen in the aspect ratio of the connected device Aspect ratio of Screen aspect setting connected device (P63) (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [16:10] Aspect setting (P69) [16:
  • Canon REALiS LCOS WUX5000 | User Manual - Page 213
    Relationship between Aspect and Screen Aspect ■When projecting on a 4:3 screen in the aspect ratio of the connected device Aspect ratio of Screen aspect setting connected device (P63) (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [4:3] [4:3 D. image shift] Aspect
  • Canon REALiS LCOS WUX5000 | User Manual - Page 214
    Relationship between Aspect and Screen Aspect ■When the image is projected on a 16:10 screen Aspect ratio of Screen aspect setting connected device (P63) Aspect setting (P69) (4:3) 1600 x 1200 1400 x 1050 640 x 480 (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 [16:10
  • Canon REALiS LCOS WUX5000 | User Manual - Page 215
    Relationship between Aspect and Screen Aspect ■When projecting on a 4:3 screen in the aspect ratio of the connected device Aspect ratio of Screen aspect setting connected device (P63) (4:3) 1600 x 1200 1400 x 1050 640 x 480 (16:10) 1920 x 1200 1440 x 900 1280 x 800 [4:3] (16:9) 1920 x 1080
  • Canon REALiS LCOS WUX5000 | User Manual - Page 216
    Relationship between Aspect and Screen Aspect ■When projecting on a 16:9 screen in the aspect ratio of the connected device Aspect ratio of Screen aspect setting connected device (P63) (4:3) 1600 x 1200 1400 x 1050 640 x 480 (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:9] [16:9 D. image shift
  • Canon REALiS LCOS WUX5000 | User Manual - Page 217
    Displayed Test Patterns If using WX6000 / SX6000 The test pattern can be displayed by pressing the [TEST PATTERN] button. Use this when there is no image signal, etc. While the test pattern is displayed, you can use the [ ] / [ ] buttons to change to a different test pattern. Also, if there is an
  • Canon REALiS LCOS WUX5000 | User Manual - Page 218
    Signal Types This projector supports the following signal types. If your computer or AV .000 * The specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of higher than 162 MHz. * Use a VGA cable in
  • Canon REALiS LCOS WUX5000 | User Manual - Page 219
    (not including projection lens unit) Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, User's Manual / Installation Manual (this manual), warranty certificate **12 When using a Standard Zoom Lens (RS-IL01ST). Varies depending on the type of lens unit
  • Canon REALiS LCOS WUX5000 | User Manual - Page 220
    including projection lens unit) Accessories Remote control, remote control dry-cell batteries, power cord, PC connection cable, User's Manual / Installation Manual (this manual), warranty certificate *1 When using a Standard Zoom Lens (RS-IL01ST). Varies depending on the type of lens unit. * 99
  • Canon REALiS LCOS WUX5000 | User Manual - Page 221
    Product Specifications ■Remote control Type Power supply Operating range Dimensions Weight RS-RC04 RS-RC05 DC 3.0V, using two AAA-size ies batter- DC 3.0V, using two AA-size batteries Approx. 8 m± 25° horizontal and vertical (to infrared remote receiver) 43 mm (W) x 23 mm (H) x 51
  • Canon REALiS LCOS WUX5000 | User Manual - Page 222
    Product Specifications Name Model number External View Short Fixed Lens RS-IL03WF Ultra Long Zoom Lens RS-IL04UL Focal length F number Projection distance* Width Height Length Weight Zoom ratio Size 100 projection distance* 12.8 mm (0.5'') 2.0 0.7 - 5.2 m (2.3 - 17.1') 97.4 mm (3.8'') 106.5 mm
  • Canon REALiS LCOS WUX5000 | User Manual - Page 223
    ■External View Product Specifications 9911mmmm (3.5'') 115500mmmm (5.9'') 92 mm 92(3m.6m'') 43403m0mmm(16.9'') 38308m0mmm(15.0'') Bolt holes (M4 x 6) for installation of ceiling attachment 1281m28mm(5m.0'') 2342.354m.5mm(m9.2'') 53 mm 5(32m.1m'') 21221m2mm(m8.4'') (6.1'') 11441.1.55mmmm
  • Canon REALiS LCOS WUX5000 | User Manual - Page 224
    Product Specifications ■Service Port (CONTROL) Pin assignment Pin No. 1 2 3 4 5 6 7 8 9 Signal OPEN RxD TxD OPEN GND OPEN OPEN OPEN OPEN Communication format Communication mode : RS-232-C, asynchronous, half-duplex
  • Canon REALiS LCOS WUX5000 | User Manual - Page 225
    Product Specifications Commands Image mode Standard ASCII representation IMAGE=STANDARD Presentation IMAGE=PRESENTATION VividPhoto IMAGE=VIVID_PHOTO Photo /sRGB IMAGE=PHOTO_SRGB Dynamic IMAGE=DYNAMIC Video IMAGE=VIDEO Cinema IMAGE=CINEMA Image mode User 1
  • Canon REALiS LCOS WUX5000 | User Manual - Page 226
    Product Specifications Commands Blank Blank On Blank Off Blank acquisition ASCII representation BLANK=ON BLANK=OFF GET BLANK Binary representation 42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 4Eh 0Dh 42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 46h 46h 0Dh 47h 45h 54h 20h 42h 4Ch 41h 4Eh 4Bh 0Dh 226
  • Canon REALiS LCOS WUX5000 | User Manual - Page 227
    Product Specifications 227 Appendix Other Information
  • Canon REALiS LCOS WUX5000 | User Manual - Page 228
    (WUX5000 / WUX4000 40 DVI-I IN (WX6000 / SX6000 48, 50 DVI-I IN terminal (WX6000 / SX6000) ... 41 Dynamic gamma 116 F Factory defaults 140 FOCUS 73 FREEZE 82 G Guide 126 H HDMI 51, 52, 59, 164 HDMI color space 99 HDMI IN terminal 40, 41, 51, 52 HDMI input level 98 HDMI over scan 100
  • Canon REALiS LCOS WUX5000 | User Manual - Page 229
    Image Mode (Image Quality 78 Information 88, 89, 141 INPUT 60 Input settings (WX6000 / SX6000) ........ 89 Input signal select 59, 94, 95 Input Terminal 40 Connecting to AV Equipment 52 Connection to Computer 47 Install settings (WX6000 / SX6000) ....... 89 K Key lock 123 Keystone 76
  • Canon REALiS LCOS WUX5000 | User Manual - Page 230
    Index V Vertical pixels 98 Vertical Position 97 VOL 83 W WARNING indicator 38, 202 Z ZOOM 71 Zoom (Aspect 69 Zooming an Image 84 230
  • Canon REALiS LCOS WUX5000 | User Manual - Page 231
    the projector from the ceiling. For details, refer to the assembly and installation manual provided with the ceiling attachment RS-CL11. • Installing / Removing the Lens unit, contact a qualified technician or the Canon Customer Support Center for further information. Do not attempt installation and
  • Canon REALiS LCOS WUX5000 | User Manual - Page 232
    Menu Configuration Display settings Menu Aspect Digital PC / Analog PC Auto * Full 16:9 4:3 True size HDMI Auto * Full 16:9 4:3 Zoom True size Component Auto * 16:9 4:3 Zoom True size Input signal select Analog PC 640x480 : 1920x1200 Component Auto * 1080p 1080i 1035i 720p 576p 480p 576i 480i
  • Canon REALiS LCOS WUX5000 | User Manual - Page 233
    Menu Configuration Image Adjustment Menu Image mode COMMON P109 Standard * Photo/sRGB User 1 - 5 (as creating profile) Digital PC / Analog PC / HDMI (when [HDMI In] P109 is [Computer]) Presentation VividPhoto Component / HDMI (when [HDMI In] is [Auto]) P109 Dynamic Video Cinema
  • Canon REALiS LCOS WUX5000 | User Manual - Page 234
    Menu Configuration System Settings Menu Power management mode Direct power on Beep Key lock Remote control Language Guide Off * Standby Exit Off * On Off On * Off * Main unit Remote control Ch1 Ch2 Ch3 Ch4 Independent * English German French Italian Spanish Portuguese Swedish Russian
  • Canon REALiS LCOS WUX5000 | User Manual - Page 235
    Input Settings Menu Aspect Digital PC / Analog PC-1 / 2 / P93 HDMI (when [HDMI In] is [PC]) Auto * 16:10 16:9 4:3 True size HDMI (when [HDMI In] is [Auto]) /Component Auto * 16:10 16:9 4:3 Zoom True size Auto PC P94 Input signal select Analog PC-1 / 2 P94 640 x 480 : 1920 x1200 Input
  • Canon REALiS LCOS WUX5000 | User Manual - Page 236
    Menu Configuration Image Adjustment Menu Image mode COMMON P109 Standard * Photo/sRGB User 1 - 5 (when creating profile) Digital PC / Analog PC-1/2 / HDMI (when [HDMI In] is P109 [Computer]) Presentation VividPhoto Component / HDMI (when P109 [HDMI In] is [Auto]) Dynamic Video
  • Canon REALiS LCOS WUX5000 | User Manual - Page 237
    in 1 Audio in 2 * P139 Component Off Audio in 1 * Audio in 2 P139 Screen color Normal * Greenboard Adjust P103 On screen Menu position P102 Guide Off On * P126 Show input status Off On * P127 Overheat warning display Off * On P133 Menu display time Normal * Extended P132 237
  • Canon REALiS LCOS WUX5000 | User Manual - Page 238
    Menu Configuration System Settings Menu Network Setting Menu Power management mode Off * Standby Exit Direct power on Off * On P120 Network setting lock P121 Network function Unlock Lock * Off * On User screen settings No signal screen Screen when blank Projector on Black Blue * Black *
  • Canon REALiS LCOS WUX5000 | User Manual - Page 239
    Menu Configuration 239
  • Canon REALiS LCOS WUX5000 | User Manual - Page 240
    CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix
Installation Manual
Projecting an Image
Safety Instructions
Before Use
Table of Contents
Setting Functions from Menus
Useful Functions Available
During a Presentation
User’s Manual
ENG
MULTIMEDIA PROJECTOR
User’s Manual /
Installation
Manual