Canon REALiS LCOS WUX5000 User Manual - Page 60
Selecting an Input Signal, Change the input signal with the input signal buttons. WX6000 / SX6000
View all Canon REALiS LCOS WUX5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to display the window shown below. Remote control Projector Remote control The currently active input signal is marked with a circle and highlighted in orange. An input signal that is ready for projection is displayed in white. When no signal is received, it is displayed in gray. However [HDMI] and [DVI-D] (WUX5000 / WUX4000) (Digital PC), or [Digital PC] (WX6000 / SX6000) may be displayed in gray even if they are ready for projection. 2 You can switch the available input signal types by pressing the INPUT button. • You can select the target input signal with Only the input signals displayed in white can be selected. 3 Press the OK button to confirm the input signal type. Change the input signal with the input signal buttons. (WX6000 / SX6000) For WX6000 / SX6000, you can also switch to the input signal you want by pressing the button that corresponds to that signal. Remote control 60