Canon S230 S230_QuickStart.pdf
Canon S230 - PowerShot 3.2 MP Digital ELPH Camera Manual
 |
UPC - 013803020779
View all Canon S230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon S230 manual content summary:
- Canon S230 | S230_QuickStart.pdf - Page 1
the other related manuals. (p. 2) You must install the software bundled on the Canon Digital Camera Solution Disk before connecting the camera to the computer. Please refer to the Troubleshooting section of the Software Starter Guide if you have trouble installing the software or downloading images. - Canon S230 | S230_QuickStart.pdf - Page 2
and Messages ....... 7 Camera User Guide Printing Images by Connecting the Camera Directly to a Printer ......... 12 Printer User Guide (Included with your Canon printer) Downloading Images to a Computer (Windows 16 Downloading Images to a Computer (Macintosh 23 Software Starter Guide 2 - Canon S230 | S230_QuickStart.pdf - Page 3
Preparing the Camera 1 Charge the battery pack. • Charge the battery pack using the supplied battery charger. The charging is complete when the charge indicator turns from red to green. • Charging the battery pack takes approximately 130 minutes. Charge indicator 2 2 Slide the battery cover in - Canon S230 | S230_QuickStart.pdf - Page 4
to . 2 Turn on the power. • Press the ON/OFF button until the power lamp on the back of the camera lights. power lamp 3 Set the date and time. (First time the camera is powered on) • The Set Date/Time menu will appear on the LCD monitor. • Select the items you wish to - Canon S230 | S230_QuickStart.pdf - Page 5
button all the way. One beep will sound when the shot is complete. • The recorded image appears in the LCD monitor for approximately 2 seconds. Reviewing an Image Displays the recorded images on the LCD monitor. 1 Selecting a replay mode. • Slide the mode switch to . 2 Turn on the power. • Press the - Canon S230 | S230_QuickStart.pdf - Page 6
Selecting Menus and Settings 1 Press the button. • In Shooting mode, the [ (Rec.)] menu appears. In Replaying mode, the [ (Play)] menu appears. 2 Switch between menu tabs using the or button. 3 Select a menu item using the or button. 4 Select setting contents using the or button. • Press the - Canon S230 | S230_QuickStart.pdf - Page 7
of pixels used to record images to CF cards. • (Large)* 2048 x 1536 pixels • the number of pixels used to record movies to CF cards. • 640 x 480 pixels • 320 x 240 pixels Sets the relative compression ratio used to record images to CF cards. • Superfine • Fine* • Normal ISO Speed AiAF Sets - Canon S230 | S230_QuickStart.pdf - Page 8
Digital Zoom Self-timer Review AF-assist Beam File No. Reset Auto Rotate Long Shutter 8 Menu Screen *Default setting Settings Content Sets whether or not the optical zoom is supplemented by digital new CF cards are inserted. • On • Off* Sets whether or not images shot with the camera on end are - Canon S230 | S230_QuickStart.pdf - Page 9
images from accidental erasure. Rotate Erase all Slide Show Rotates images clockwise 90º or 270º in the display. Deletes all images from a CF card (except for protected images.) Plays images in automated slide shows. Print Order Transfer Order Selects images and the number of print copies for - Canon S230 | S230_QuickStart.pdf - Page 10
to warn of errors even when Off is selected. Sets whether or not the camera automatically powers down after a set period of time elapses without something being pressed. • On* • Off Sets the date and time and the date format. Format Formats (initializes) CF cards - Canon S230 | S230_QuickStart.pdf - Page 11
Item Video System Communication Menu Screen Settings Content Sets the video output signal standard. • NTSC • PAL Sets the camera and computer communication settings. • Normal* • PTP 11 - Canon S230 | S230_QuickStart.pdf - Page 12
's mode switch to and turn on the power. • appears on the camera's LCD monitor. • If you cannot use the camera's compact power adapter*, please use a fully charged battery pack. To DIGITAL Terminal Camera's Compact Power Adapter* To Power Outlet To Power Outlet Direct Interface Cable DIF - Canon S230 | S230_QuickStart.pdf - Page 13
4 Choose an image using the or button and press the button. 5 Choose [Print] using the / / / buttons and press the button. • The image will start to print and, when it is completely finished, the display will revert to standard replay mode. 13 - Canon S230 | S230_QuickStart.pdf - Page 14
• For more information, please see the Quick Start Guide that came with your BJ printer. 2 Turn the BJ printer's power on. Power button 3 Connect the camera to the BJ printer. Set the camera's mode switch to and turn on the power. • Connect the camera to the printer using the cable supplied with - Canon S230 | S230_QuickStart.pdf - Page 15
standard replay mode. • We recommend the use of the AC Adapter Kit ACK500 (optional) as the camera's power source. • Images cannot be printed through the BJ printer operation panel during the camera connection. • Please use the following procedures when you detach the cable from the printer and the - Canon S230 | S230_QuickStart.pdf - Page 16
are not guaranteed. Installing the Software • Do not connect the camera to the computer before the software is installed. • The USB driver will start its installation procedures after the camera has been connected to the computer. • Users of Windows 2000 and Windows XP Professional must first log - Canon S230 | S230_QuickStart.pdf - Page 17
name extensions. 2 Click [Software Installation], and follow the onscreen instructions by clicking [Next] or [Yes]. Installer panel • In the next steps, you will select the installation destination, the software to be installed and the name of your camera model. 3 Review the installation settings - Canon S230 | S230_QuickStart.pdf - Page 18
now." in the screen below and click [Finish]. • Remove the Canon Digital Camera Solution Disk once the installation is complete and before you connect the camera to the computer so that the proper driver can be installed. Connecting the Camera to the Computer 1 Connect one end of the USB cable to - Canon S230 | S230_QuickStart.pdf - Page 19
USB cable to the camera's Digital terminal. • Open the terminal cover and connect the cable. 3 Set the camera's mode switch to and turn on the power. 2. USB cable Insert the connector until it clicks. 1. Terminal cover Installing the Driver ■ Windows XP 1 Install the driver. • After a few moments - Canon S230 | S230_QuickStart.pdf - Page 20
install the TWAIN driver (for Windows 98 and Windows 2000) or the WIA driver (for Windows Me). • After Canon ZoomBrowser EX] and click [OK]. • ZoomBrowser EX starts; the Camera Window opens and displays the camera images as thumbnails (small images). Downloading and Saving Images from the Camera - Canon S230 | S230_QuickStart.pdf - Page 21
• This will display the Camera window. The images on the CF card will display in the Camera window as thumbnails. • Select the images you wish to download in the Camera window and click [Download image]. Thumbnail "RAW" displays on The movie icon displays RAW images. on movie thumbnails. 21 - Canon S230 | S230_QuickStart.pdf - Page 22
• A Download Settings dialog allowing you to select the image destination folder will display. • Make sure the settings are the same as the following and click [OK]. • At this point the Camera window will close and the main window will open. The downloaded images will appear in the main window. 22 - Canon S230 | S230_QuickStart.pdf - Page 23
Downloading Images to a Computer (Macintosh) System Requirements Computer Model OS CPU RAM Interface a USB 2.0 compliant board are not guaranteed. Installing the Software • Close any programs that are running. 1 Place the Canon Digital Camera Solution Disk into your computer's CD-ROM drive. Mac OS - Canon S230 | S230_QuickStart.pdf - Page 24
programs you wish to install and follow the instructions on the screen. • The software required for the camera will be installed. 4 Once the installation is complete and the installer panel appears, click [Quit]. 5 Remove the Canon Digital Camera Solution Disk from the CDROM drive. Connecting the - Canon S230 | S230_QuickStart.pdf - Page 25
[Canon Camera] in the Explorer View section. Set the communication settings (first time connection only) The name of your camera model appears here. Mac OS 8.6-9.2 screen shot shown. • Confirm that [USB Port] and your camera model name are selected and click the [Set] button. The Camera window - Canon S230 | S230_QuickStart.pdf - Page 26
[Macintosh HD] in the Explorer View section. Mac OS X • Select the [your name] subfolder of the [Users] folder in the startup disk. Explorer View 1. Create a new folder for saving images from the camera. • Click the [File] menu and select [New Folder]. A folder with the name "Untitled" will be - Canon S230 | S230_QuickStart.pdf - Page 27
Downloading and Saving Images from the Camera Thumbnail The movie icon displays on movie thumbnails. "RAW" displays on RAW images. • Select images in the Camera window and click the [Download] button. The downloaded images are saved to the computer and appear in the Browser area. 27 - Canon S230 | S230_QuickStart.pdf - Page 28
MEMO 28 - Canon S230 | S230_QuickStart.pdf - Page 29
MEMO 29 - Canon S230 | S230_QuickStart.pdf - Page 30
MEMO 30 - Canon S230 | S230_QuickStart.pdf - Page 31
31 - Canon S230 | S230_QuickStart.pdf - Page 32
CDI-E074-010 XXXXXXX © 2002 CANON INC. PRINTED IN JAPAN
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
Quick Start Guide
This guide explains basic operations for first-time use, how to
use the direct print function, and how to install the software
and download images to a computer. For more information
about usage precautions and detailed instructions, please
refer to the other related manuals. (p. 2)
You must install the software bundled on the Canon Digital Camera
Solution Disk before connecting the camera to the computer.
Please refer to the
Troubleshooting
section of the
Software Starter Guide
if
you have trouble installing the software or downloading images.
ENGLISH