Canon S750 S750 Easy Setup Instructions - Page 1
Canon S750 - S 750 Color Inkjet Printer Manual
View all Canon S750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
1 Unpack the Printer 1 Carefully remove all items from the box. S750 Series Color Bubble Jet Printer 2 Prepare the Printer 1 Remove the shipping tape from the front and sides of the printer. Start Here Easy Setup Instructions 3 Install the Printhead 1 Remove the printhead from its package. Shipping Tape 2 Turn the printhead over, then remove the orange protective cap. 2 Plug the power cord into the back of the printer and connect the other end to a power outlet. Color Bubble Jet™ Printer 4 Install the Ink Tanks 1 Pull the orange tab off the yellow ink tank (BCI-3eY), then remove and discard the plastic wrapper. 2 Twist off and discard the orange protective cap. Protective cap 5 Connect the Printer To Your Computer For USB Cables: 1 Turn the printer off. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Connect one end of the USB cable to the computer, the other to the printer. Paper Rest Output Tray NOTE: Do not touch the electrical contacts. Electrical contacts 3 Press the POWER button. POWER Button POWER Lamp 3 Raise the gray lock lever. Documentation and Software Kit S750 BJ (Bubble Jet) Printhead Power Cord 4 Open the front cover. The printhead holder automatically moves to the center. Remove the protective tape. 4 Gently slide the printhead into the holder. The printhead will rest at a slight angle. Do not press it down. Ink Tanks BCI-3eC Cyan BCI-3eM Magenta BCI-3eBK Black BCI-3eY Yellow Protective tape 5 Lower the lock lever and gently press it down until it locks into place. Serial number Write down the serial number located to the right of the printhead. You will need this later to register the product. NOTE: To avoid spilling ink, never press on the sides of an ink tank. 3 Insert the ink tank into the correct slot. (Refer to the color guide on the printhead.) Press down gently until the ink tank locks into place. 4 Insert the remaining three ink tanks into their assigned slots. 5 Close the front cover and attach the paper rest and output tray. USB Cable USB Port For Parallel Cables: 1 Turn the printer off. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Connect one end of the parallel cable to the computer, the other to the printer. (IEEE 1284 compliant) Parallel Cable Parallel Cable Secure Wire Clips Parallel Port Continue with Step 6 on side two.