Canon SELPHY CP510 Printer Software Guide Windows (For Canon CP Printer Soluti - Page 25

No power is supplied to the printer. - ink and paper

Page 25 highlights

Ink cassette is empty and must be replaced. Press [Resume] to resume, or [Cancel] to stop. Cause : There is no more ink in the ink cassette. Correction : Replace the ink cassette with a new one. In the following cases, the number of prints specified for the installed Color Ink/Paper Set may not be obtained: • If printing has been interrupted in progress • If the ink sheet has been wound too tightly (while removing slack from the ink sheet) Ink cassette not installed. You must insert an ink cassette before printing. Press [Resume] to resume, or [Cancel] to stop. Cause : The ink cassette is not inserted into the printer. Correction : Insert the ink cassette into the printer. The printer is not ready for printing. Check the printer power and printer connections. Cause : No power is supplied to the printer. Correction : Turn the printer on. Cause : The USB cable is not connected correctly. Correction : Check the USB cable to make sure it is connected correctly. No Paper Cassette has been found. Insert an appropriate one. Press [Resume] to resume, or [Cancel] to stop. Cause : The paper cassette is not inserted. Correction : Insert the paper cassette into the printer. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

25
Correction :
Replace the ink cassette with a new one.
In the following cases, the number of prints specified for the installed
Color Ink/Paper Set may not be obtained:
If printing has been interrupted in progress
If the ink sheet has been wound too tightly (while removing slack
from the ink sheet)
Correction :
Insert the ink cassette into the printer.
Correction :
Turn the printer on.
Correction :
Check the USB cable to make sure it is connected correctly.
Correction :
Insert the paper cassette into the printer.
Ink cassette is empty and must be replaced.
Press [Resume] to resume, or [Cancel] to stop.
Cause :
There is no more ink in the ink cassette.
Ink cassette not installed.
You must insert an ink cassette before printing.
Press [Resume] to resume, or [Cancel] to stop.
Cause :
The ink cassette is not inserted into the printer.
The printer is not ready for printing.
Check the printer power and printer connections.
Cause :
No power is supplied to the printer.
Cause :
The USB cable is not connected correctly.
No Paper Cassette has been found.
Insert an appropriate one.
Press [Resume] to resume, or [Cancel] to stop.
Cause :
The paper cassette is not inserted.