Canon ST-E3-RT Instruction Manual - Page 63
Troubleshooting Guide
View all Canon ST-E3-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Troubleshooting Guide If a problem occurs with the transmitter, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power does not turn on. Make sure that the batteries are installed in the correct orientation (p.12). Insert the mounting foot into the camera's hot shoe all the way, slide the lock lever to the right, and secure the transmitter to the camera (p.13). If the electrical contacts of the transmitter and camera are dirty, clean the contacts (p.7). The charge lamp lights when the wireless shooting (slave) is ready. The power turns off by itself. The transmitter's auto power off function has activated. Press the shutter button halfway, or press the test flash button (p.14). The slave unit does not fire. Check that the slave unit supports radio transmission wireless flash shooting. Set the slave unit to