Canon VB-H630D Network Camera VB-H630VE/VB-H630D/VB-M620VE/VB-M620D Installati - Page 1

Network Camera / / Installation Guide BIE-7029-001 ENGLISH / Thank you for purchasing a Canon Network Camera (hereafter referred to as the camera). VB-H630D/VB-M620D is designed for indoor use only. It is also possible to install the VB-H630VE/ VB-M620VE outdoors, such as underneath eaves. Be sure to read "Installation Guide" (this document) and "Operation Guide" (included in the Setup CD-ROM) before use. This "Installation Guide" explains the installation method for installing the camera on a ceiling or wall and the installation method using the separately sold junction box mounting kit PS600-VB. Be sure to read the "Safety Precautions" section for correct use. After reading this Installation Guide, keep it in a readily accessible location for future reference. For the installation of this camera recessed into a ceiling or wall using the recessed mounting kit (sold separately), please read the "Recessed Mounting Kit SR600-VB Installation Guide" included with the recessed mounting kit. When using the heater unit (sold separately), please read the "Heater Unit HU600-VB User Manual" included with the heater unit. The detailed procedures for using this camera are explained in the "Operation Guide". Read these guides carefully before using the camera to ensure correct use. * For the latest information (firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site. * Some cameras are not sold in some countries or regions. WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Caution Request a professional installer for all camera installation work. Never try to install the camera yourself. Doing so may result in unforeseen accidents such as dropping the camera or electric shock. Write the serial number and MAC address of the camera (printed on the seal at the bottom of the camera) in the field below before storing this Installation Guide in a safe location. Serial number MAC Address © CANON INC. 2015 Printed in Taiwan Check Included Items This product comes with the following items. If any item is missing, contact the dealer where you purchased the product. 1. Camera 2. Power connector (VB-H630VE/VB-H630D/ VB-M620VE/VB-M620D) 3. Safety wire 4. Audio interface cable Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio When using the camera (for video or audio recording), it is the full responsibility of the user to protect privacy and avoid any violation of publicity rights. For example, obtain consent to install the camera in advance if specific buildings or rooms are to be monitored. Canon shall have no liability whatsoever in this regard. Legal Notice In some cases, camera monitoring may be prohibited by law or regulation, the details of which differ by country or region. Before using the camera, check the laws or regulations of the country or region where the camera is used. User Manuals • Installation Guide (This document) This guide provides notes on camera installation and explains the procedures to install the camera onto a ceiling or wall. • Operation Guide (Included in the Setup CD-ROM) This document explains the initial camera settings, Admin Tools settings, viewer operations and troubleshooting, etc. Symbols Indicating Camera Model Camera specific functions will be listed using the icons below. : VB-H630VE : VB-H630D : VB-M620VE : VB-M620D Accessories The following accessories can be purchased separately as necessary. Some accessories are not sold in some countries or regions. Recessed Mounting Kit SR600-VB This dedicated accessory is used to install the camera recessed into a wall or ceiling. Junction Box Mounting Kit PS600-VB This dedicated accessory is used to mount the camera to a junction box. Heater unit HU600-VB This dedicated accessory is attached to the interior of VB-H630VE/VB-M620VE to maintain operation temperature within the dome and achieve stable operation even in extremely cold environments. Pendant Mounting Kit PC600-VB This is a dedicated accessory for large stores with high ceilings used to install the camera at the end of a pipe stretching down from the ceiling. Important When this accessory is used, the camera may shake more than the vibrations in the ceiling depending on how the pipe is mounted to the ceiling. If the camera angle is off, use the Camera Angle Setting Tool to readjust the angle (See "Operation Guide" > "Camera Angle Setting Tool"). Canon AC Adapter PA-V18 A dedicated AC adapter for this camera. 5. Template for VB-H630D/ VB-M620D for V B-H630VE/ VB-M620VE 6. Dome case lock screw wrench (VB-H630VE/VB-M620VE only) 7. Setup CD-ROM 8. Installation Guide (This document) 9. Warranty card 10. Notice Only for European Union and EEA (Norway, Iceland and Liechtenstein) These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives. If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentration above an applicable threshold specified in the Battery Directive. This product should be handed over to a designated collection point, e.g., on an authorized one-forone basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe. com/weee, or www.canon-europe.com/battery. Symbols Indicating Safety Precautions This Installation Guide uses the following marks to indicate important information the user should know in order to use the product safely. Be sure to observe these items. Warning Inappropriate handling against the instruction accompanied by this sign may result in death or serious injury. Be sure to observe these warnings to ensure safety. Caution Inappropriate handling against the instruction accompanied by this sign may result in injury. Be sure to observe these precautions to ensure safety. Caution Inappropriate handling against the instruction accompanied by this sign may result in property damage. Be sure to observe these precautions. Important This symbol indicates important or restricted items. Be sure to read this section. Note Contains reference information for operation or additional explanations. Safety Precautions This section explains precautions that must be observed when using the camera. If they are not observed, injury, death and/or property damage may occur. Read the following information carefully and be sure to observe the precautions. Installation Precautions Warning Do not install in the following places: • Places in strong direct sunlight, near heat-generating objects, or subject to high temperatures • Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.) • Humid or dusty places • Places subject to oily smoke or steam • Places subject to sea air • Confined or enclosed places Fire or electric shock may result. Caution For installation or inspection of this camera, consult the dealer where you purchased the product. • This installation should be made by a qualified service person and should conform to all local codes. • When installing on a ceiling, make sure the surface is capable of withstanding the total weight of the camera and ceiling plates and is sufficiently reinforced if necessary. • Periodically check the parts and screws for rust and to see if they have loosened, in order to prevent injuries and equipment damage due to falling items. • Do not install in unstable places, places subject to significant vibration or impact, or places subject to salt damage or corrosive gas. • Be sure to attach the safety wire when installing the camera. Failure to do so may result in the camera falling or other accidents. • Do not touch the edge of metal parts with bare hands. • Be careful not to trap your fingers during installation of the camera. Injury may result. Caution • Do not move the lens unit by hand. • Do not install the camera on an unstable surface. • To maximize shock resistant specifications, do not install on insufficiently strong surfaces or surfaces subject to significant vibration (VB-H630VE/VB-M620VE). • Take measures to remove static electricity before performing any procedures. • If there is condensation, please wait to power on, until the condensation dissipates. Malfunction may result. • Take care not to damage wiring or pipes in the room. Damage to peripheral items may result. . Precautions for Installing the Camera Outdoors (VB-H630VE/VB-M620VE) When installing the VB-H630VE/VB-M620VE outdoors, observe the following precautions to retain waterproof/dustproof capabilities. • Be sure to install the camera under eaves or other places out of direct sunlight. • Install the camera in a place unexposed to long periods of direct rainfall. • When mounting the camera onto a wall or other upright surface, position the wiring hole straight down to prevent rain infiltration. • If wiring the camera through the wiring hole on the bottom, use silicone sealant or a rubber mat to ensure waterproofing. Also use an insect repellent sponge if necessary. • If wiring with a composite pipe (NPT 3/4 inch threaded hole) attached to the wiring hole, wrap teflon tape around the tip of the Position the wiring hole straight down pipe, clear any debris from the wiring hole and firmly tighten the pipe. Apply silicone sealant after attaching the pipe. • Firmly fix the dome case to the main unit of the camera with the lock screws, taking care not to pinch cables between the main unit and dome case. Precautions for Use Warning • If you discover defective conditions such as smoke, strange sounds, heat or strange odors, immediately stop using the camera and contact your closest dealer. Fire or electric shock may result from continued use of the product. • If thunder starts, stop installation or inspection etc. and do not touch the camera or continue connecting the cable. • Do not disassemble or modify the camera. • Do not damage the connecting cable. • Do not spill water or other liquid inside the camera, spray the camera with water, or otherwise make it wet. • Do not insert foreign objects into the camera. • Do not use flammable sprays near the camera. • Do not leave LAN cables, external power supplies or AC adapter (sold separately) power connectors connected when the camera is not in use for long periods. • Do not use flammable solvents such as alcohol, paint thinner or benzine when cleaning the camera. Fire or electric shock may result. Notes on Power Supply Warning • Only use the dedicated AC Adapter (sold separately) for AC power. • Do not set any heavy objects on the power cable (or the LAN cable for a PoE power supply). • Do not pull, forcibly bend, scratch, or modify the power cable (or the LAN cable for a PoE power supply). • Do not cover or wrap the AC adapter (sold separately) with cloth or blankets. Fire or electric shock may result. Caution • After turning off the power, wait for at least five seconds before turning the power on again. If the power is turned on again too quickly, the camera may operate poorly. External Dimensions VB-H630VE/VB-M620VE R62 (R2.44) 164 ( 6.46) 7.5° 3- 4.6 ( 0.18) (mounting screw holes) 147 (5.79) 120° 140 (5.51) 120° VB-H630D/VB-M620D R62 (R2.44) 3/4" NPT threaded hole 120° 3- 4.5 ( 0.18) 120° (mounting screw holes) 155 ( 6.10) Junction Box Plate 14- 4.5 ( 0.18) (Junction box fixing holes) 12° 4.2 (0.17) 46 (1-13/16) 83.5 (3-9/32) 85.7 (3-3/8) 46 (1-13/16) 83.5 (3-9/32) 85.7 (3-3/8) Unit: mm (in.) Main Specifications Camera Image Sensor Number of Effective Pixels Scanning Method Lens Focal Length*1 F-number Viewing Angle Day/Night Switch Min. Subject Illumination Day Mode (color) Night Mode (monochrome) Focus Shooting Distance (from front of lens) Shutter Speed Exposure White Balance Metering Mode Exposure Compensation Smart Shade Control Haze Compensation AGC Limit Pan Angle Range Tilt Angle Range Rotation Angle Range Moving Speed 1/3 type CMOS (primary color filter) Approx. 2.1 million pixels Approx. 1.3 million pixels Progressive 3x optical (4x digital zoom) zoom lens (electric drive) 2.8 (W) - 8.4 mm (T) F1.2 (W) - F2.0 (T) For 16:9 aspect ratios Horizontal: 111.0° (W) - 36.5° (T) Vertical: 60.1° (W) - 20.5° (T) For 4:3 aspect ratios Horizontal: 81.2° (W) - 27.3° (T) Vertical: 60.1° (W) - 20.5° (T) Auto/Day Mode/Night Mode 0.3 lux (F1.2, shutter speed 1/30 sec., when smart shade control is off, 50IRE) 0.02 lux (F1.2, shutter speed 1/2 sec., when smart shade control is off, 50IRE) 0.008 lux (F1.2, shutter speed 1/2 sec., when smart shade control is on, 50IRE) 0.015 lux (F1.2, shutter speed 1/30 sec., when smart shade control is off, 50IRE) 0.001 lux (F1.2, shutter speed 1/2 sec., when smart shade control is off, 50IRE) 0.0005 lux (F1.2, shutter speed 1/2 sec., when smart shade control is on, 50IRE) One-shot AF/Manual/Fixed at infinity Day Mode: 0.3 m (12 in.) - infinity Night Mode: 1.0 m (3.3 ft.) - infinity 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000, 1/16000 sec. Auto/Auto (Flickerless)/Auto (Shutter-priority AE)/Manual (Shutter Speed, Aperture, Gain) Auto/Light Source (Daylight Fluorescent/White Fluorescent/Warm Fluorescent/ Mercury Lamp/Sodium Lamp/Halogen Lamp)/Manual (One-shot WB/R Gain/B Gain) Center-Weighted/Average/Spot 9 levels Auto/Manual/Disable Auto: 3 levels Manual: 7 levels Brightens shaded areas of a video Auto/Manual/Disable Auto: 3 levels Manual: 7 levels 5 levels 350° (±175°) 150° (±75°) 350° (±175°) Pan: 17.1°/sec., Tilt: 12.6°/sec., Rotation: 25.9°/sec. When the Camera Angle Setting Tool is used Server Video Compression Method JPEG, H.264 Video Size JPEG, H.264 : 1 920 x 1080, 960 x 540, 480 x 270 1280 x 720, 640 x 360, 320 x 180 1280 x 960, 640 x 480, 320 x 240 JPEG, H.264 : 1 280 x 720, 640 x 360, 320 x 180 1280 x 960, 640 x 480, 320 x 240 Video Quality JPEG, H.264: 5 levels Frame Rate*2 JPEG: 0.1 - 30 fps H.264: 1/2/3/5/6/10/15/30 fps Max. Frame Rate When streaming JPEG, H.264 (1920 x 1080): 30 fps When used in the following combinations: When streaming H.264(1) (1920 x 1080) and H.264(2) (all sizes) simultaneously: 15 fps When streaming H.264(1) (all sizes) and H.264(2) (1920 x 1080) simultaneously: 15 fps When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps When streaming JPEG, H.264 (1280 x 960): 30 fps When used in the following combinations: When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps I-Frame Interval 0.5/1/1.5/2/3/4/5 sec. Simultaneous Client Access Max. 30 Clients + 1 Admin Client H.264: Max. 10 Clients Camera Control Administrator, Authorized user, Guest user (level of control varies depending on user) Max. 50 user names and passwords registered for authorized users. Access Control User authority (user name and password), Host Access Restrictions (IPv4, IPv6) Encrypted Communications SSL/TLS, IPsec (Auto Key Exchange/Manual) IEEE 802.1X EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP Protocol IPv4: T CP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), SMTP (Client), DHCP (Client), DNS (Client), mDNS, ARP, ICMP, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF IPv6: T CP/IP, UDP, HTTP, FTP, SMTP (Client), DHCPv6 (Client), DNS (Client), mDNS, ICMPv6, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF AutoIP Available Audio Compression Method G.711 µ-law (64 kbps) Audio Communication Method Full-duplex (two-way) Echo cancellation function compliant Sound Transfer Protocol by Canon Audio File Playback*3 Available (audio files can be played back when an event is triggered by the intelligent function or external device input.) Privacy Mask Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9 colors) Preset Max. 20 positions Intelligent Function Detection Types: moving object detection, abandoned object detection, removed object detection, camera tampering detection, and passing detection Detection Settings: Max. 15 Volume Detection Event Trigger Type External Device Input, Intelligent Function (Video), Intelligent Function (Volume), Timer Image Upload FTP/HTTP/SMTP (e-mail) Temporary storage memory in camera : Max. approx. 5 MB Frame Rate: Max. 10 fps (JPEG) Max. 30 fps (H.264) Event Notification HTTP/SMTP (e-mail) Image Cropping Function Digital PTZ Cropping sizes : 6 40 x 360/512 x 288/384 x 216/256 x 144/128 x 72 640 x 480/512 x 384/384 x 288/256 x 192/128 x 96 On-Screen Display Daylight Saving Time Custom Settings Language Available Available Number of registers: 4 Items to Reg.: E xposure, Smart Shade Control, Haze Compensation, Focus, White Balance, Image Quality Adjustment, Day/Night German/English/Spanish/French/Italian/Russian/Turkish/Chinese (Simplified)/ Japanese "ONVIF" is a trademark of ONVIF Inc. Interface Network Terminal*4 Audio Input Terminal (common for LINE IN & MIC IN) Audio Output Terminal (LINE OUT) External Device I/O Terminal Memory Card LAN x 1 (RJ45, 100Base-TX (auto/full-duplex/half-duplex)) 3.5 mm ( 0.14 in.) mini-jack connector (monaural) Connect via an audio interface cable (included) Switch LINE IN/MIC IN in the setting page. LINE IN x 1 (connect to an amplifier microphone) or MIC IN x 1 (connect to a microphone w/o amplifier) 3.5 mm ( 0.14 in.) mini-jack connector (monaural) Connect via an audio interface cable (included) LINE OUT x 1 (connect to an amplifier speaker) Input x 2, Output x 2 SD Memory Card, SDHC Memory Card, SDXC Memory Card Compatible. Frame Rate: M ax. 1 fps (JPEG) Max. 30 fps (H.264) Others Operating Environment Temperature: -10°C - +50°C (+14°F - +122°F) Humidity: 5% - 85% (without condensation) Power Supply Power Consumption Dimensions Weight Impact Resistance Dust-resistant/ Waterproof Specification Temperature: -30°C - +50°C (-22°F - +122°F) Humidity: 5% - 85% (without condensation)* *Equipped with separately sold Heater Unit HU600-VB PoE:PoE power supply via LAN connector (IEEE802.3af Class 0 compliant) AC Adapter: PA-V18 (100 - 240 V AC) (sold separately) External power source: 24 V AC/12 V DC Heater Unit HU600-VB (sold separately): 24 V AC only When using PoE:  Max. approx. 8.4 W*5 Max. approx. 7.8 W*5 When using AC Adapter PA-V18:  Max. approx. 9.9 W (100 V AC) Max. approx. 10.3 W (240 V AC) Max. approx. 9.4 W (100 V AC) Max. approx. 9.2 W (240 V AC) When using DC:  Max. approx. 9.0 W Max. approx. 8.3 W When using AC:  Max. approx. 8.1 W Max. approx. 7.5 W Max. approx. 18.7 W* *when separately sold Heater Unit HU600-VB installed ( x H) 180 x 147 mm ( 7.09 x 5.79 in.) ( x H) 186 x 140 mm ( 7.32 x 5.51 in.) Approx. 1920 g (4.24 lb.) Approx. 162 g (5.8 oz.) (Junction Box Mounting Kit) Approx. 1190 g (2.63 lb.) Approx. 159 g (5.7 oz.) (Junction Box Mounting Kit) External materials: aluminum alloy, Dome: polycarbonate plastics IK10 compliant With lens shock absorbing mechanism Estimated shock resistant: 50J (based on Canon's test method) IP66 compliant (IEC60529) Only applies if properly installed and adequately waterproofed *1 (W): maximum wide angle, (T): maximum telephoto *2 Values represent streaming performance from the camera. The frame rate may be reduced due to Viewer PC's specs, the number of clients accessing at the same time, network loads, video quality setting, type or movement of the subject or other reasons. *3 A third-party amplifier speaker is necessary. *4 Use a category 5 or better LAN cable, 100 m (328 ft.) or less in length. *5 Class 0 power sourcing equipment (requests 15.4 W) The contents of this guide are subject to change without any prior notice. CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands