Canon VB-H730F Mark II Network Camera Operation Guide - Page 168
External Device Input
View all Canon VB-H730F Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Important When [Active Output Format] is set to [Pulse] and a timer is used (P. 155), contact output is controlled only once when the timer starts. External Device Input [External Device Input Event] Select whether to use the input from an external device, such as a connected sensor, as an event. External Device Input 1, 2 (Title Is Displayed for HM4x H730 Only) You can set the operation to be performed when an event is triggered by input from an external device. The camera has two external device inputs. You can set the input for each of them. HM4x H730 You can set these if you have selected [Enable] in [External Device Input Event]. Note An icon in the [Event and Input/Output] menu of the Camera Viewer will indicate when there is an external device input event (P. 72). [Operation Mode] Select the circuit condition to suit the signal input from the connected external device. When [Normally Open] is set, an active event occurs when the terminals of the external device close, and an inactive event occurs when the terminals open. When [Normally Close] is set, an active event occurs when the terminals of the external device open, and an inactive event occurs when the terminals close. [Active Event Operation] Select the operation to be performed when an active event is triggered. If [Enable] is set, [Preset] ( HM4x S30 S31 ), [Video Record] and [E-mail Notification] will be executed according to their settings when an active event is triggered. [Inactive Event Operation] Select the operation to be performed when an inactive event is triggered. If [Enable] is set, [Preset] ( HM4x S30 S31 ), [Video Record] and [E-mail Notification] will be executed according to their settings when an inactive event is completed. [Ongoing Active Event Operation] Select the operation to be performed during an active event. This can only be set when [Active Event Operation] is set to [Enable]. If [Enable] is set, [Video Record] and [E-mail Notification] will be executed according to their settings during the active event. [Preset] HM4x S30 S31 If you specify a preset, the camera angle will automatically move to the preset location when an external device input event is triggered. It is necessary to set presets beforehand with [Camera] > [Preset] (P. 118). Important HM4x S30 S31 When the camera is moved to a preset position specified in the [Preset] settings, camera control privileges are released, even if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications. [Video Record] Select whether to record video depending on the event. If you select [Enable] and an external device input event is triggered, video will be transmitted to the recording destination specified in [Video Record] > [Upload] > [Video Record Action] (P. 144). [E-mail Notification] Select whether to send an e-mail notification depending on the event. If [Enable] is selected, e-mail notification will be performed when an external device input event is triggered. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 148) beforehand. 150