Canon VB-M40 Network Video Recording Software RM-Lite Ver.1.0 Administrator's - Page 26
Settings After Installation, Windows Firewall Settings
View all Canon VB-M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Settings After Installation Configure the following setting after installing this software according to the operating system you are using: Windows Firewall Setting Security Level Setting Warning when Viewer Starts Sound Settings for Using the Audio Feature Windows 7, Windows Vista 3 - 3 Windows Server 2008, Windows Server 2008 R2 3 3 3 - 3 (3: Required, -: Not required) Windows Firewall Settings The changes to the settings are already complete if you selected the [Add storage server programs to the Windows Firewall exception list] check box during installation. If you did not select the above check box during installation, perform the following procedure to change the Windows Firewall settings. The following settings are not required if you install the Storage Server and Viewer onto the same computer. When using Windows 7 or Windows Server 2008 R2 1 Click [Start] > [Control Panel] to open the [Control Panel]. 2 Click [System and Security] > [Windows Firewall]. 3 Click [Advanced Settings] to display the [Windows Firewall with Advanced Security] window. 4 Click [Inbound Rules] and select [New Rule] from the [Action] menu to start the [New Inbound Rule Wizard]. 5 Click [Port], and then click [Next]. 6 Click [TCP] and [Specific local ports], and then enter 80 as the port number. Then click [Next]. 7 Click [Allow the connection], and then click [Next]. 8 Click [Next]. 9 Enter a name (such as the Storage Server or Storage Server Group name) in [Name] and click [Finish]. 10 The added inbound rule should be displayed in the [Windows Firewall with Advanced Security] window, with a checkmark icon displayed next to the rule. When using Windows Vista or Windows Server 2008 1 Click [Start] > [Control Panel] to open the [Control Panel]. 2 Click [System and Security] > [Windows Firewall]. In the Control Panel Classic View, double click [Windows Firewall]. 3 Click [Change settings]. If the [User Account Control] dialog box is displayed, click [Continue]. 4 Click the [Exceptions] tab and click [Add Port]. 5 In the [Add a Port] dialog box, enter the name of the Storage Server and 80 as the port number. Make sure that [TCP] is selected and click [OK]. 6 Confirm that the added Storage Server is now displayed in the [Windows Firewall] dialog box and that the check box is selected. Then, click [OK]. 2-4