Canon VB-M42 Network Camera VB-H43/VB-M42 Installation Guide - Page 1

Canon VB-M42 Manual

Page 1 highlights

Network Camera / Installation Guide BIE-7028-001 ENGLISH Thank you for purchasing a Canon Network Camera (hereafter referred to as the camera). The only difference between VB-H43/VB-M42 and VB-H43B/VB-M42B is the exterior color. Be sure to read "Installation Guide" (this document) and "Operation Guide" (included in the Setup CD-ROM) before use. This "Installation Guide" explains the installation method of the camera using the ceiling mount cover (sold separately). Be sure to read the "Safety Precautions" section for correct use. After reading this Installation Guide, keep it in a readily accessible location for future reference. For the installation method of this camera using the indoor dome housing (sold separately), please read the "Installation Guide" included with the indoor dome housing. The detailed procedures for using this camera are explained in the "Operation Guide". Read these guides carefully before using the camera to ensure correct use. * For the latest information (firmware and included software, user manuals, operating environment, etc.), please refer to the Canon Web Site. * Some cameras are not sold in some countries or regions. WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Caution Request a professional installer for all camera installation work. Never try to install the camera yourself. Doing so may result in unforeseen accidents such as dropping the camera or electric shock. Check Included Items This product comes with the following items. If any item is missing, contact the dealer where you purchased the product. 1. VB-H43/VB-H43B or VB-M42/VB-M42B 4. Installation Guide (This document) 2. Power connector 5. Warranty card 3. Setup CD-ROM 6. Notice Write the serial number and MAC address of the camera (printed on the seal at the bottom of the camera) in the field below before storing this Installation Guide in a safe location. Serial number MAC Address © CANON INC. 2015 Printed in Taiwan Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio When using the camera (for video or audio recording), it is the full responsibility of the user to protect privacy and avoid any violation of publicity rights. For example, obtain consent to install the camera in advance if specific buildings or rooms are to be monitored. Canon shall have no liability whatsoever in this regard. Legal Notice In some cases, camera monitoring may be prohibited by law or regulation, the details of which differ by country or region. Before using the camera, check the laws or regulations of the country or region where the camera is used. Only for European Union and EEA (Norway, Iceland and Liechtenstein) These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives. If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentration above an applicable threshold specified in the Battery Directive. This product should be handed over to a designated collection point, e.g., on an authorized onefor-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canoneurope.com/weee, or www.canon-europe.com/battery. The contents of this guide are subject to change without any prior notice. CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands Symbols Indicating Safety Precautions This Installation Guide uses the following marks to indicate important information the user should know in order to use the product safely. Be sure to observe these items. Warning Inappropriate handling against the instruction accompanied by this sign may result in death or serious injury. Be sure to observe these warnings to ensure safety. Caution Inappropriate handling against the instruction accompanied by this sign may result in injury. Be sure to observe these precautions to ensure safety. Caution Inappropriate handling against the instruction accompanied by this sign may result in property damage. Be sure to observe these precautions. Important This symbol indicates important or restricted items. Be sure to read this section. Contains reference information for operation or additional Note explanations. Safety Precautions This section explains precautions that must be observed when using the camera. If they are not observed, injury, death and/or property damage may occur. Read the following information carefully and be sure to observe the precautions. Installation Precautions Warning Do not install in the following places: • Places in strong direct sunlight, near heat-generating objects, or subject to high temperatures • Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.) • Humid or dusty places • Places subject to oily smoke or steam • Places subject to sea air • Confined or enclosed places Fire or electric shock may result. Caution For installation or inspection of this camera, consult the dealer where you purchased the product. • This installation should be made by a qualified service person and should conform to all local codes. • When installing on a ceiling, make sure the surface is capable of withstanding the total weight of the ceiling mount cover and the camera, and is sufficiently reinforced if necessary. • Periodically check the parts and screws for rust and to see if they have loosened, in order to prevent injuries and equipment damage due to falling items. • Do not install in unstable places, places subject to significant vibration or impact, or places subject to salt damage or corrosive gas. • The camera cannot be installed on vertical surfaces such as walls. • Be sure to attach the safety wire when installing the camera. Failure to do so may result in the camera falling or other accidents. • Do not touch the edges of metal parts with bare hands. • Be careful not to trap your fingers during installation of the camera. Injury may result. Caution • Do not carry the camera by the camera head. • Do not turn the camera rotator by hand. • Do not install the camera on an unstable or inclined surface. • If there is condensation, please wait to power on, until the condensation dissipates. Malfunction may result. • Take care not to damage wiring or pipes in the room. Damage to peripheral items may result. Precautions for Use Warning • If you discover defective conditions such as smoke, strange sounds, heat or strange odors, immediately stop using the camera and contact your nearest dealer. Fire or electric shock may result from continued use of the product. • If thunder starts, stop installation or inspection etc. and do not touch the camera or continue connecting the cable. • Do not disassemble or modify the camera. • Do not damage the connecting cable. • Do not spill water or other liquid inside the camera, spray the camera with water, or otherwise make it wet. • Do not insert foreign objects into the camera. • Do not use flammable sprays near the camera. • Do not leave LAN cables, external power supplies or AC adapter (sold separately) power connectors connected when the camera is not in use for long periods. • Do not use flammable solvents such as alcohol, paint thinner or benzine when cleaning the camera. Fire or electric shock may result. 155 (6.10) 112.5 (4.43) (when lens is horizontal) 10° 90° 161 (6.34) (when lens is fully vertical) 46 (1-13/16) 83.5 (3-9/32) 85.7 (3-3/8) External Dimensions Camera 132 ( 5.20) 4-M3 (mounting screw holes) 47 47 (1.85) (1.85) 15 (0.59)15 (0.59) R5(5p(ooRfs2sm.ib1o7ltei)orna)nge Junction Box Plate 46 (1-13/16) 83.5 (3-9/32) 85.7 (3-3/8) 14- 4.5 ( 0.18) (Junction box fixing holes) 18 48 (0.71) (1.89) Ceiling Mount Cover 22 (0.87) 180 (7.09) 66 (2.60) 140 (5.51) 116 (4.57) 4- 3.4 ( 0.13) (camera mounting holes) 4- 4.5 ( 0.18) (ceiling mount holes) 20 (0.79) 65 (2.56) 20 (0.79) 45 (1.77) 160 (6.30) 144 (5.67) 4- 3.4 ( 0.13) (Junction Box Plate mounting holes)  Unit: mm (in.) User Manuals • Installation Guide (This document) This guide provides notes on the camera installation and explains the procedures to install the camera using a ceiling mount cover (sold separately), as well as the main camera specifications. • Operation Guide (Included in the Setup CD-ROM) This document explains the initial camera settings, Admin Tools settings, viewer operations and troubleshooting, etc. Symbols Indicating Camera Model Camera specific functions will be listed using the icons below. : VB-H43 : VB-M42 Main Specifications Camera Image Sensor 1/3 type CMOS (primary color filter) Number of Effective Pixels Approx. 2.1 million pixels Approx. 1.3 million pixels Scanning Method Progressive Lens 20x optical (12x digital zoom) zoom lens with auto focus Focal Length*1 4.7 (W) - 94 mm (T) F-number F1.6 (W) - F3.5 (T) Viewing Angle For 16:9 aspect ratios Horizontal: 60.4° (W) - 3.2° (T), Vertical: 35.1° (W) - 1.8° (T) For 4:3 aspect ratios Horizontal: 46.3° (W) - 2.4° (T), Vertical: 35.1° (W) - 1.8° (T) Day/Night Switch Auto/Day Mode/Night Mode Min. Subject Illumination Day Mode (color) 0.4 lux (F1.6, shutter speed 1/30 sec., when smart shade control is off, 50IRE) 0.03 lux (F1.6, shutter speed 1/2 sec., when smart shade control is off, 50IRE) 0.01 lux (F1.6, shutter speed 1/2 sec., when smart shade control is on, 50IRE) Night Mode (monochrome) 0.02 lux (F1.6, shutter speed 1/30 sec., when smart shade control is off, 50IRE) 0.002 lux (F1.6, shutter speed 1/2 sec., when smart shade control is off, 50IRE) 0.001 lux (F1.6, shutter speed 1/2 sec., when smart shade control is on, 50IRE) Focus Auto/One-shot AF/Manual/Fixed at infinity Shooting Distance Day Mode: 0.3 m (12 in.) - infinity (W), 1.0 m (3.3 ft.) - infinity (T) (from front of lens) Night Mode: 1.0 m (3.3 ft.) - infinity (W), 1.5 m (4.9 ft.) - infinity (T) When [Use] is selected for [Dome]: Day Mode: 2.0 m (6.6 ft.) - infinity (W, T) Night Mode: 1.0 m (3.3 ft.) - infinity (W), 2.2 m (7.2 ft.) - infinity (T) Shutter Speed 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000, 1/16000 sec. Exposure Auto/Auto (Flickerless)/Auto (Shutter-priority AE)/Manual (Shutter Speed, Aperture, Gain) White Balance Auto/Light Source (Daylight Fluorescent/White Fluorescent/Warm Fluorescent/ Mercury Lamp/Sodium Lamp/Halogen Lamp)/Manual (One-shot WB/R Gain/B Gain) Metering Mode Center-Weighted/Average/Spot Exposure Compensation 9 levels Smart Shade Control Auto/Manual/Disable Auto: 3 levels Manual: 7 levels Brightens shaded areas of a video Haze Compensation Auto/Manual/Disable Auto: 3 levels Manual: 7 levels AGC Limit 5 levels Image Stabilizer 2 levels (digital) Pan Angle Range 340° (±170°) Tilt Angle Range 100º (ceiling-mounted position: -90º - +10º) When the horizontal direction of the camera is 0° Moving Speed Pan: Max. 150º/sec. Tilt: Max. 150º/sec. Server Video Compression Method Video Size Video Quality Frame Rate*2 Max. Frame Rate I-Frame Interval Simultaneous Client Access Camera Control Access Control Encrypted Communications IEEE 802.1X Protocol AutoIP Audio Compression Method Audio Communication Method Audio File Playback*3 Privacy Mask View Restriction Preset Intelligent Function Event Trigger Type Image Upload Event Notification On-Screen Display Daylight Saving Time Custom Settings Language JPEG, H.264 JPEG, H.264: 1 920 x 1080, 960 x 540, 480 x 270 1280 x 720, 640 x 360, 320 x 180 1280 x 960, 640 x 480, 320 x 240 JPEG, H.264: 1 280 x 720, 640 x 360, 320 x 180 1280 x 960, 640 x 480, 320 x 240 JPEG, H.264: 5 levels JPEG: 0.1 - 30 fps H.264: 1/2/3/5/6/10/15/30 fps When streaming JPEG, H.264 (1920 x 1080): 30 fps When used in the following combinations: When streaming H.264(1) (1920 x 1080) and H.264(2) (all sizes) simultaneously: 15 fps When streaming H.264(1) (all sizes) and H.264(2) (1920 x 1080) simultaneously: 15 fps When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps When streaming JPEG, H.264 (1280 x 960): 30 fps When used in the following combinations: When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps 0.5/1/1.5/2/3/4/5 sec. Max. 30 Clients + 1 Admin Client H.264: Max. 10 Clients Administrator, Authorized user, Guest user (level of control varies depending on user) Max. 50 user names and passwords registered for authorized users. User authority (user name and password), Host Access Restrictions (IPv4, IPv6) SSL/TLS, IPsec (Auto Key Exchange/Manual) EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP IPv4: TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), SMTP (Client), DHCP (Client), DNS (Client), mDNS, ARP, ICMP, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF IPv6: TCP/IP, UDP, HTTP, FTP, SMTP (Client), DHCPv6 (Client), DNS (Client), mDNS, ICMPv6, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF Available G.711 μ-law (64 kbps) Full-duplex (two-way) Echo cancellation function compliant Sound Transfer Protocol by Canon Available (audio files can be played back when an event is triggered by the intelligent function or external device input.) Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9 colors) Available Max. 64 positions Detection Types: moving object detection, abandoned object detection, removed object detection, camera tampering detection, and passing detection Detection Settings: Max. 15 Volume Detection External Device Input, Intelligent Function (Video), Intelligent Function (Volume), Timer FTP/HTTP/SMTP (e-mail) Temporary storage memory in camera: Max. approx. 5MB Frame Rate: M ax. 10 fps (JPEG) Max. 30 fps (H.264) HTTP/SMTP (e-mail) Available Available Number of registers: 4 Items to Reg.: Pan/Tilt/Zoom, Exposure, Smart Shade Control, Haze Compensation, Focus, White Balance, Image Quality Adjustment, Day/Night German/English/Spanish/French/Italian/Russian/Turkish/Chinese (Simplified)/ Japanese "ONVIF" is trademarks of ONVIF Inc. Interface Network Terminal*4 Audio Input Terminal (common for LINE IN & MIC IN) Audio Output Terminal (LINE OUT) External device I/O Terminal Memory Card LAN x 1 (RJ45, 100Base-TX (auto/full-duplex/half-duplex)) 3.5 mm ( 0.14 in.) mini-jack connector (monaural) Switch LINE IN/MIC IN in the setting page. LINE IN x 1 (connect to an amplifier microphone) or MIC IN x 1 (connect to a microphone w/o amplifier) 3.5 mm ( 0.14 in.) mini-jack connector (monaural) LINE OUT x 1 (connect to an amplifier speaker) Input x 2, Output x 2 SD Memory Card, SDHC Memory Card, SDXC Memory Card compatible. Frame Rate: Max. 1 fps (JPEG) Max. 30 fps (H.264) Others Operating Environment Temperature: -10°C - +50°C (+14°F - +122°F) Humidity: 5% - 85% (without condensation) Power Supply PoE: PoE power supply via LAN connector (IEEE802.3af Class 0 compliant) AC adapter: PA-V18 (100 - 240 V AC) (sold separately) External power source: 24 V AC/12 V DC Power Consumption When using PoE: Max. approx. 9.2 W*5 When using AC Adapter PA-V18: Max. approx. 9.9 W (100 V AC) Max. approx. 9.4 W (240 V AC) When using DC: Max. approx. 8.6 W When using AC: Max. approx. 8.8 W Dimensions ( x H) 132 x 155 mm ( 5.20 x 6.10 in.) Camera only (height when camera is placed horizontally, excluding Ceiling Bracket) Weight Approx. 1140 g (2.52 lb.) (Camera) Approx. 270 g (9.6 oz.) (Ceiling Plate, Ceiling Mount Cover) Approx. 108 g (3.9 oz.) (Junction Box Plate) *1 (W): maximum wide angle, (T): maximum telephoto *2 Values represent streaming performance from the camera. The frame rate may be reduced due to Viewer PC's specs, the number of clients accessing at the same time, network loads, video quality setting, type or movement of the subject or other reasons. *3 A third-party amplifier speaker is necessary. *4 Use a category 5 or better LAN cable, 100 m (328 ft.) or less in length. *5 Class 0 power sourcing equipment (requests 15.4 W)

  • 1
  • 2

Network Camera
/
Installation Guide
BIE-7028-001
Thank you for purchasing a Canon Network Camera (hereafter referred to as the camera).
The only difference between VB-H43/VB-M42 and VB-H43B/VB-M42B is the exterior color.
Be sure to read “Installation Guide” (this document) and “Operation Guide” (included in the Setup
CD-ROM) before use.
This “Installation Guide” explains the installation method of the camera using the ceiling mount
cover (sold separately). Be sure to read the “Safety Precautions” section for correct use. After
reading this Installation Guide, keep it in a readily accessible location for future reference.
For the installation method of this camera using the indoor dome housing (sold separately),
please read the “Installation Guide” included with the indoor dome housing.
The detailed procedures for using this camera are explained in the “Operation Guide”. Read
these guides carefully before using the camera to ensure correct use.
* For the latest information (firmware and included software, user manuals, operating
environment, etc.), please refer to the Canon Web Site.
* Some cameras are not sold in some countries or regions.
Caution
Request a professional installer for all camera installation work. Never
try to install the camera yourself. Doing so may result in unforeseen
accidents such as dropping the camera or electric shock
.
Check Included Items
This product comes with the following items. If any item is missing, contact the dealer where you
purchased the product.
1. VB-H43/VB-H43B or VB-M42/VB-M42B
4. Installation Guide (This document)
2. Power connector
5. Warranty card
3. Setup CD-ROM
6. Notice
Symbols Indicating Safety Precautions
This Installation Guide uses the following marks to indicate important information the
user should know in order to use the product safely. Be sure to observe these items.
Warning
Inappropriate handling against the instruction accompanied by this
sign may result in death or serious injury. Be sure to observe these
warnings to ensure safety.
Caution
Inappropriate handling against the instruction accompanied by this
sign may result in injury. Be sure to observe these precautions to
ensure safety.
Caution
Inappropriate handling against the instruction accompanied by
this sign may result in property damage. Be sure to observe these
precautions.
Important
This symbol indicates important or restricted items. Be sure to read
this section.
Note
Contains reference information for operation or additional
explanations.
Safety Precautions
This section explains precautions that must be observed when using the camera. If they
are not observed, injury, death and/or property damage may occur. Read the following
information carefully and be sure to observe the precautions.
Installation Precautions
Warning
Do not install in the following places:
Places in strong direct sunlight, near heat-generating objects, or subject to high
temperatures
Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.)
Humid or dusty places
Places subject to oily smoke or steam
Places subject to sea air
Confined or enclosed places
Fire or electric shock may result.
Caution
For installation or inspection of this camera, consult the dealer where you purchased the
product.
This installation should be made by a qualified service person and should conform to all
local codes.
When installing on a ceiling, make sure the surface is capable of withstanding the
total weight of the ceiling mount cover and the camera, and is sufficiently reinforced if
necessary.
Periodically check the parts and screws for rust and to see if they have loosened, in
order to prevent injuries and equipment damage due to falling items.
Do not install in unstable places, places subject to significant vibration or impact, or
places subject to salt damage or corrosive gas.
The camera cannot be installed on vertical surfaces such as walls.
Be sure to attach the safety wire when installing the camera.
Failure to do so may result in the camera falling or other accidents.
Do not touch the edges of metal parts with bare hands.
Be careful not to trap your fingers during installation of the camera.
Injury may result.
Caution
Do not carry the camera by the camera head.
Do not turn the camera rotator by hand.
Do not install the camera on an unstable or inclined surface.
If there is condensation, please wait to power on, until the condensation dissipates.
Malfunction may result.
Take care not to damage wiring or pipes in the room.
Damage to peripheral items may result.
Precautions for Use
Warning
If you discover defective conditions such as smoke, strange sounds, heat or strange
odors, immediately stop using the camera and contact your nearest dealer.
Fire or electric shock may result from continued use of the product.
If thunder starts, stop installation or inspection etc. and do not touch the camera or
continue connecting the cable.
Do not disassemble or modify the camera.
Do not damage the connecting cable.
Do not spill water or other liquid inside the camera, spray the camera with water, or
otherwise make it wet.
Do not insert foreign objects into the camera.
Do not use flammable sprays near the camera.
Do not leave LAN cables, external power supplies or AC adapter (sold separately)
power connectors connected when the camera is not in use for long periods.
Do not use flammable solvents such as alcohol, paint thinner or benzine when cleaning
the camera.
Fire or electric shock may result.
Write the serial number and MAC address of the camera (printed on the seal at the bottom of
the camera) in the field below before storing this Installation Guide in a safe location.
Serial number
_________________________________
MAC Address
_________________________________
ENGLISH
© CANON INC. 2015
Printed in Taiwan
External Dimensions
Camera
Junction Box Plate
161 (6.34)
(when lens is fully vertical)
10°
90°
R55 (R2.17)
(possible range
of motion)
132 (
5.20)
18
(0.71)
155 (6.10)
112.5 (4.43)
(when lens is horizontal)
48
(1.89)
4-M3
(mounting
screw holes)
47
(1.85)
47
(1.85)
15 (0.59)
15 (0.59)
83.5 (3-9/32)
85.7 (3-3/8)
85.7 (3-3/8)
83.5 (3-9/32)
46 (1-13/16)
46 (1-13/16)
14-
4.5 (
0.18)
(Junction box fixing holes)
Ceiling Mount Cover
4-
3.4 (
0.13)
(camera mounting holes)
180 (7.09)
66
(2.60)
140 (5.51)
116 (4.57)
45
(1.77)
22 (0.87)
160 (6.30)
20
(0.79)
20
(0.79)
144 (5.67)
65
(2.56)
4-
3.4 (
0.13)
(Junction Box Plate
mounting holes)
4-
4.5 (
0.18)
(ceiling mount holes)
Unit: mm (in.)
Notes on Privacy and Publicity Rights Regarding the Use of
Video/Audio
When using the camera (for video or audio recording), it is the full responsibility of the user to
protect privacy and avoid any violation of publicity rights. For example, obtain consent to install
the camera in advance if specific buildings or rooms are to be monitored. Canon shall have no
liability whatsoever in this regard.
Legal Notice
In some cases, camera monitoring may be prohibited by law or regulation, the details of which
differ by country or region. Before using the camera, check the laws or regulations of the country
or region where the camera is used.
Server
Video Compression Method
JPEG, H.264
Video Size
JPEG, H.264: 1920 x 1080, 960 x 540, 480 x 270
1280 x 720, 640 x 360, 320 x 180
1280 x 960, 640 x 480, 320 x 240
JPEG, H.264: 1280 x 720, 640 x 360, 320 x 180
1280 x 960, 640 x 480, 320 x 240
Video Quality
JPEG, H.264: 5 levels
Frame Rate*
2
JPEG: 0.1 – 30 fps
H.264: 1/2/3/5/6/10/15/30 fps
Max. Frame Rate
When streaming JPEG, H.264 (1920 x 1080): 30 fps
When used in the following combinations:
When streaming H.264(1) (1920 x 1080) and H.264(2) (all sizes) simultaneously: 15 fps
When streaming H.264(1) (all sizes) and H.264(2) (1920 x 1080) simultaneously: 15 fps
When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps
When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps
When streaming JPEG, H.264 (1280 x 960): 30 fps
When used in the following combinations:
When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps
When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps
I-Frame Interval
0.5/1/1.5/2/3/4/5 sec.
Simultaneous Client Access
Max. 30 Clients + 1 Admin Client
H.264: Max. 10 Clients
Camera Control
Administrator, Authorized user, Guest user (level of control varies depending on
user)
Max. 50 user names and passwords registered for authorized users.
Access Control
User authority (user name and password), Host Access Restrictions (IPv4, IPv6)
Encrypted Communications
SSL/TLS, IPsec (Auto Key Exchange/Manual)
IEEE 802.1X
EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP
Protocol
IPv4:
TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), SMTP (Client),
DHCP (Client), DNS (Client), mDNS, ARP, ICMP, POP3, NTP, SMTP
authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF
IPv6:
TCP/IP, UDP, HTTP, FTP, SMTP (Client), DHCPv6 (Client), DNS (Client),
mDNS, ICMPv6, POP3, NTP, SMTP authentication, RTSP,
WV-HTTP (Canon proprietary), ONVIF
AutoIP
Available
Audio Compression Method
G.711 μ-law (64 kbps)
Audio Communication Method
Full-duplex (two-way)
Echo cancellation function compliant
Sound Transfer Protocol by Canon
Audio File Playback*
3
Available (audio files can be played back when an event is triggered by the
intelligent function or external device input.)
Privacy Mask
Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9
colors)
View Restriction
Available
Preset
Max. 64 positions
Intelligent Function
<Video>
Detection Types: moving object detection, abandoned object detection, removed
object detection, camera tampering detection, and passing detection
Detection Settings: Max. 15
<Volume>
Volume Detection
Event Trigger Type
External Device Input, Intelligent Function (Video), Intelligent Function (Volume),
Timer
Image Upload
FTP/HTTP/SMTP (e-mail)
Temporary storage memory in camera: Max. approx. 5MB
Frame Rate: Max. 10 fps (JPEG)
Max. 30 fps (H.264)
Event Notification
HTTP/SMTP (e-mail)
On-Screen Display
Available
Daylight Saving Time
Available
Custom Settings
Number of registers: 4
Items to Reg.:
Pan/Tilt/Zoom, Exposure, Smart Shade Control, Haze Compensation,
Focus, White Balance, Image Quality Adjustment, Day/Night
Language
German/English/Spanish/French/Italian/Russian/Turkish/Chinese (Simplified)/
Japanese
“ONVIF” is trademarks of ONVIF Inc.
Interface
Network Terminal*
4
LAN x 1 (RJ45, 100Base-TX (auto/full-duplex/half-duplex))
Audio Input Terminal
3.5 mm (
0.14 in.) mini-jack connector (monaural)
(common for LINE IN & MIC IN)
Switch LINE IN/MIC IN in the setting page.
LINE IN x 1 (connect to an amplifier microphone) or
MIC IN x 1 (connect to a microphone w/o amplifier)
Audio Output Terminal
3.5 mm (
0.14 in.) mini-jack connector (monaural)
(LINE OUT)
LINE OUT x 1 (connect to an amplifier speaker)
External device I/O Terminal
Input x 2, Output x 2
Memory Card
SD Memory Card, SDHC Memory Card, SDXC Memory Card compatible.
Frame Rate: Max. 1 fps (JPEG)
Max. 30 fps (H.264)
Others
Operating Environment
Temperature: -10°C – +50°C (+14°F – +122°F)
Humidity: 5% – 85% (without condensation)
Power Supply
PoE: PoE power supply via LAN connector (IEEE802.3af Class 0 compliant)
AC adapter: PA-V18 (100
– 240
V AC
) (sold separately)
External power source: 24 V AC/12 V DC
Power Consumption
When using PoE: Max. approx. 9.2 W*
5
When using AC Adapter PA-V18: Max. approx. 9.9 W (100 V AC)
Max. approx. 9.4 W (240 V AC)
When using DC: Max. approx. 8.6 W
When using AC: Max. approx. 8.8 W
Dimensions
(
x H)
132 x 155 mm (
5.20 x 6.10 in.)
Camera only (height when camera is placed horizontally, excluding Ceiling Bracket)
Weight
Approx. 1140 g (2.52 lb.) (Camera)
Approx. 270 g (9.6 oz.) (Ceiling Plate, Ceiling Mount Cover)
Approx. 108 g (3.9 oz.) (Junction Box Plate)
*1
(W): maximum wide angle, (T): maximum telephoto
*2
Values represent streaming performance from the camera. The frame rate may be reduced due to Viewer PC’s
specs, the number of clients accessing at the same time, network loads, video quality setting, type or movement
of the subject or other reasons.
*3
A third-party amplifier speaker is necessary.
*4
Use a category 5 or better LAN cable, 100 m (328 ft.) or less in length.
*5
Class 0 power sourcing equipment (requests 15.4 W)
User Manuals
Installation Guide (This document)
This guide provides notes on the camera installation and explains the procedures to install the
camera using a ceiling mount cover (sold separately), as well as the main camera specifications.
Operation Guide (Included in the Setup CD-ROM)
This document explains the initial camera settings, Admin Tools settings, viewer operations
and troubleshooting, etc.
Symbols Indicating Camera Model
Camera specific functions will be listed using the icons below.
: VB-H43
: VB-M42
Main Specifications
Camera
Image Sensor
1/3 type CMOS (primary color filter)
Number of Effective Pixels
Approx. 2.1 million pixels
Approx. 1.3 million pixels
Scanning Method
Progressive
Lens
20x optical (12x digital zoom) zoom lens with auto focus
Focal Length*
1
4.7 (W) – 94 mm (T)
F-number
F1.6 (W) – F3.5 (T)
Viewing Angle
For 16:9 aspect ratios
Horizontal: 60.4° (W) – 3.2° (T), Vertical: 35.1° (W) – 1.8° (T)
For 4:3 aspect ratios
Horizontal: 46.3° (W) – 2.4° (T), Vertical: 35.1° (W) – 1.8° (T)
Day/Night Switch
Auto/Day Mode/Night Mode
Min. Subject Illumination
Day Mode (color)
0.4 lux (F1.6, shutter speed 1/30 sec., when smart shade control is off, 50IRE)
0.03 lux (F1.6, shutter speed 1/2 sec., when smart shade control is off, 50IRE)
0.01 lux (F1.6, shutter speed 1/2 sec., when smart shade control is on, 50IRE)
Night Mode (monochrome)
0.02 lux (F1.6, shutter speed 1/30 sec., when smart shade control is off, 50IRE)
0.002 lux (F1.6, shutter speed 1/2 sec., when smart shade control is off, 50IRE)
0.001 lux (F1.6, shutter speed 1/2 sec., when smart shade control is on, 50IRE)
Focus
Auto/One-shot AF/Manual/Fixed at infinity
Shooting Distance
Day Mode: 0.3 m (12 in.) – infinity (W), 1.0 m (3.3 ft.) – infinity (T)
(from front of lens)
Night Mode: 1.0 m (3.3 ft.) – infinity (W), 1.5 m (4.9 ft.) – infinity (T)
When [Use] is selected for [Dome]:
Day Mode: 2.0 m (6.6 ft.) – infinity (W, T)
Night Mode: 1.0 m (3.3 ft.) – infinity (W), 2.2 m (7.2 ft.) – infinity (T)
Shutter Speed
1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000, 1/16000 sec.
Exposure
Auto/Auto (Flickerless)/Auto (Shutter-priority AE)/Manual (Shutter Speed, Aperture,
Gain)
White Balance
Auto/Light Source (Daylight Fluorescent/White Fluorescent/Warm Fluorescent/
Mercury Lamp/Sodium Lamp/Halogen Lamp)/Manual (One-shot WB/R Gain/B
Gain)
Metering Mode
Center-Weighted/Average/Spot
Exposure Compensation
9 levels
Smart Shade Control
Auto/Manual/Disable
Auto: 3 levels
Manual: 7 levels
Brightens shaded areas of a video
Haze Compensation
Auto/Manual/Disable
Auto: 3 levels
Manual: 7 levels
AGC Limit
5 levels
Image Stabilizer
2 levels (digital)
Pan Angle Range
340° (±170°)
Tilt Angle Range
100º (ceiling-mounted position: -90º – +10º) When the horizontal direction of the
camera is 0°
Moving Speed
Pan: Max. 150º/sec. Tilt: Max. 150º/sec.
WARNING
To reduce a risk of fire or electric shock, do not expose this product
to rain or moisture.
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2012/19/EU), the Battery
Directive (2006/66/EC) and/or national legislation implementing those
Directives.
If a chemical symbol is printed beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a
concentration above an applicable threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized one-
for-one basis when you buy a new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper
handling of this type of waste could have a possible impact on the environment and human health
due to potentially hazardous substances that are generally associated with EEE. Your cooperation
in the correct disposal of this product will contribute to the effective usage of natural resources.
For more information about the recycling of this product, please contact your local city office,
waste authority, approved scheme or your household waste disposal service or visit www.canon-
europe.com/weee, or www.canon-europe.com/battery.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
The contents of this guide are subject to change without any prior notice.