Canon VB-M620D Camera Management Tool User Manual - Page 29
Camera, Use DHCPv6], Use DHCP/DHCPv6], erver], Time zone], Daylight, aving Time]
View all Canon VB-M620D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
[Use DHCPv6] The NTP server address is automatically acquired from the DHCPv6 server. To enable this setting, you need to configure the settings for [IPv6] on the Setting Page for the camera. For Setting Page details, please refer to the camera's "Operation Guide". [Use DHCP/DHCPv6] The NTP server address is automatically acquired from the DHCP or (IPv4) or DHCPv6 server. Note • If a connection to the NTP server cannot be established because, for example, the IP address of the NTP server is incorrect, the date and time are not changed. • The NTP server query interval is 300 seconds. (4) [NTP Server] If you select [Auto-Setting of NTP Server] > [Disable], enter the IP address or host name of the NTP server. (5) [Time zone] Select the appropriate time zone. If the time zone setting is changed, the date and time display will update automatically according to the specified time zone. (6) [Daylight Saving Time] Select whether to automatically adjust the daylight saving time according to the time zone. Camera Settings and Operation 2 Camera (1) (1) [Camera Name (alphanumeric characters)] Enter the desired camera name. When multiple cameras are selected, the same name will be applied. To set a different camera name for each camera, set the basic camera settings for each camera separately or open the Setting Page for each camera and set the name. 29