Canon VB-M620VE Network Video Recording Software RM Series Administrator s Man - Page 83
Sensor Recording Settings, ensor Recording] in the recording mode list
View all Canon VB-M620VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Record on a Regular Basis (Repeating Weekly Schedules) • Recording mode stream operates only with cameras that support the recording mode stream function and if a stream has been acquired. • If an upload function is already being used on the camera, you cannot use the recording-mode stream function. To use the recording-mode stream function, select [Upload] > [Upload Disabled] on the setting page of the camera. Sensor Recording Settings 1 Click [Sensor Recording] in the recording mode list and select the check box. 2 Configure the video and event settings. • To use recording mode stream, select [Video Format] > [JPEG], and set [Maximum Frame Rate] to "10" or lower value. • When the recording-mode stream function is used, the 5 streamed video has a higher priority than the live video. Depending on the load on the camera, such as the number of (1) Viewers that are simultaneously connected to the camera, (2) display of the live video may stop. (3) (4) Setting a Recording Schedule (1) [Do not record] Select to not record even when there is a signal from this sensor. Hint You can individually enable or disable recording for each sensor. For example, you may not want to record when there is door sensor signal, but to start recording when there is a window sensor signal. (2) [Start Recording] Start recording when there is a signal from the sensor. After selecting the item, configure the recording settings below the item. (3) [Priority] Select the event priority. For details, see "Check Events" (p. 109). (4) [Invert this event] Start recording when the input from the sensor disappears. For example, start recording when there is no signal from the sensor, and stop recording when a signal is present. 83