Canon VB-M641V Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 162

R11 R10 Focus Mode Auto/Manual Fixed at Infinity Day/Night Settings Day Mode Max. Wide-Angle 0.3 m (12 in.) - infinity Fixed near infinity* Max. Telephoto 2.0 m (6.6 ft.) - infinity Night Mode Max. Wide-Angle 1.0 m (3.3 ft.) - infinity * Using infrared illumination from an external device may throw the camera out of focus. M641 M640 M741 M740 For details on focus ranges, please refer to the table on P. 55. Max. Telephoto 2.0 m (6.6 ft.) - infinity Note • For details on difficult to focus subjects, please refer to "Difficult to Focus Subjects" (P. 55). • It is recommended that you check that the camera is focused whenever you restart the camera or use One-shot AF. Exposure Set the exposure and shutter speed. (1) (2) (3) (4) (5) (6) (7) (1) Exposure mode [Auto] The exposure is controlled automatically. [Manual] The exposure is set by adjusting the shutter speed, aperture and gain manually. This is not available if [Smart Shade Control] (P. 159) is set to [Auto]. [Auto (Flickerless)] Shutter speed is adjusted automatically to suit the lighting conditions. Video flickering caused by fluorescent lights, etc., is reduced. [Auto (Shutter-priority AE)] The aperture is adjusted automatically to suit the specified shutter speed. Note If [Auto] is selected in [Camera] > [Initial Setting] > [Day/Night] on the Setting Page, select [Auto], [Auto (Flickerless)] or [Auto (Shutterpriority AE)] for [Exposure]. (2) [Exposure Compensation] When you select [Auto], [Auto (Flickerless)] or [Auto (Shutter-priority AE)] for [Exposure], you can adjust the brightness of the video by using the slider to select the exposure compensation. 162