Canon VB-M720F Camera Management Tool User Manual - Page 27
Password, ubnet Mask], IPv4 Default Gateway Address, AutoIP], IPv4 address AutoIP], pecification
View all Canon VB-M720F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Specification Character * Description Example This is a wildcard. It can be specified for the first to fourth octets of an IP address. 192.168.100.* From 192.168.100.1 to 192.168.100.254 2 - Enter this between numbers to specify a range. It can be specified for only the fourth octet of an IP address. 192.168.100.100-150 From 192.168.100.100 to 192.168.100.150 Camera Settings and Operation Important • An IP address beginning with "127". (e.g., 127.0.0.1) cannot be set. • When setting the IP address by specifying a wildcard or range, the IPv4 addresses that already exist in the camera list will not be used for the setting. • When an empty IP address does not exist in the range of a wildcard or range specification, settings will not be configured. (3) [Subnet Mask] When [IPv4 Address Setting Method] is [Manual], enter the subnet mask value designated for the corresponding network. (4) IPv4 Default Gateway Address When [IPv4 Address Setting Method] is [Manual] and the camera will connect to a different subnet than the Viewer, select the [IPv4 Default Gateway Address] check box and then enter an IPv4 default gateway address. (5) [AutoIP] When a camera compatible with AutoIP is selected, select whether to use AutoIP. (6) [IPv4 address (AutoIP)] When [AutoIP] is [Enable], the automatically set IPv4 address is displayed. Password (1) (2) Change the administrator user "root" password for the camera. (1) [Password] Enter ASCII characters (space or printable characters) for the administrator password. 27