Canon VB-M720F Network Video Recording Software RM Series Administrator Manual - Page 151

 Error Codes Winsock Error Codes Code Error Messages Possible Cause 10038 An operation was attempted on something that is not a socket. This may occasionally occur. No action is required. 10048 Only one usage of each socket address (protocol/ network address/port) is normally permitted. All communication resources are in use. This error is frequently reported when a video can no longer be displayed in a Viewer layout sequence. 10050 A socket operation encountered a dead network. Occurs when the computer recognizes that the network is down because the router or hub closest to the computer is powered off. Normally, this cannot be recognized, therefore this error is rarely reported. 10051 A socket operation was attempted to an unreachable network. Occurs when other network devices recognize that the network is down because the router or hub is powered off. Normally, this cannot be recognized, therefore this error is rarely reported. The connection was aborted by the camera due to 10054 An existing connection was forcibly closed by the remote host. a camera restart or other causes. This may occur when the camera is restarted using the restart button on the Setting Page provided by the camera 9 software. However, this rarely occurs. Troubleshooting 10060 A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. A timeout occurred in the TCP connection with the camera. This occurs when the camera is powered off. 10061 No connection could be made because the target machine actively refused it. The camera rejected the TCP connection. This occurs when the port number is incorrect or from another cause. 10064 A socket operation failed because the destination Occurs when the camera is powered off. Normally, host was down. 10060 occurs. 10065 A socket operation was attempted to an unreachable host. There is no route for connecting to the camera. This may also occur when there is a failure in the network cable connected to the computer or hub. 10091 WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. There is a failure on the computer's network adapter. 11001 No such host is known. The host name could not be resolved in the DNS. 11004 The requested name is valid, but no data of the requested type was found. The host name could not be resolved in the DNS. SMTP Error Codes Code 421 450 451 502 550 Error Messages Possible Cause 'domain' Service not available, closing transmission The communication was terminated because the channel mail server was stopped. Requested mail action not taken: mailbox unavailable The requested mail processing was not performed because the mailbox is not available. Requested action aborted: local error in processing The requested operation was canceled because an error occurred in the mail server. Command not implemented The mail server does not support the command that was sent. Requested action not taken: mailbox unavailable The request was not executed because the mailbox is not available. 151