Canon VIXIA HF M52 VIXIA HF M50 / HF M52 / HF M500 Instruction Manual - Page 167
Touch the field under [IP Address] or [Subnet Mask] - camcorder review
View all Canon VIXIA HF M52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
4 Within 2 minutes, touch [OK] on the camcorder's screen. You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress. 5 Touch [Automatic] to automatically obtain an IP address. • To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address below. • A screen to test the settings will appear. 6 Select whether to test the settings. • You can touch [Check Current Configuration] to review the network settings. • If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK]. 7 Save the settings of the connection point. [Yes] > [OK]* > [X] * After touching [OK], you can review the network settings. Touch [Wi-Fi Setup] > [Check Current Configuration] > Desired connection point > [Î] or [Í] > [K] three times when finished. To manually assign an IP address (step 5) After touching [Manual] in step 5: Touch the field under [IP Address] or [Subnet Mask] > Enter* the IP address or subnet mask > [OK] > Enter the default gateway > [OK] > Enter the default primary and secondary DNS servers > [OK] > Continue to step 6 * An interface similar to the virtual keyboard for text fields (A 88) will appear except it will contain only the keys necessary for this step. Wi-Fi Functions 167