Canon VIXIA HF R30 VIXIA HF R30 / HF R32 / HF R300 Instruction Manual - Page 155
To manually enter a wireless access point step 3
View all Canon VIXIA HF R30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
5 Touch [Automatic] to automatically obtain an IP address. • To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address (A 153). • A screen to test the settings will appear. 6 Select whether to test the settings. • You can touch [Check Current Configuration] to review the network settings. • If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK]. 7 Save the settings of the connection point. [Yes] > [OK]* > [X] * After touching [OK], you can review the network settings. Touch [Wi-Fi Setup] > [Check Current Configuration] > Desired connection point ([ 1] to [ 3]) > [Î] or [Í] > [K] three times when finished. To manually enter a wireless access point (step 3) Enter the details of the wireless access point. Enter the access point's SSID > [OK] > [OK] > Enter the authentication/encryption method* and, if applicable, the encryption key of the access point > [OK] > Continue to step 5 * If you select [Open], you can select [No Encryption] or [WEP]. If you select, [Open] > [WEP] or [Shared Key WEP], you will need to specify the WEP index key. NOTES • The functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use. • Wi-Fi functions, including connecting to a Wi-Fi network, are not available when the optional WM-V1 Wireless Microphone is attached to the camcorder. • When using Wi-Fi functions, wireless communication with an Eye-Fi card is not possible. Wi-Fi Functions 155