Canon Vizcam 1000 Brochure - Page 4

SPECIFICATIONS CAMERA Pickup Device: Total Pixels Effective Pixels Horizontal Resolution Vertical Resolution Synchronization White Balance Electronic Shutter Speed Gain Control Negative Conversion 1/4" CCD 410,000 380,000 492 (V) x 768(H) 450 TV lines (at Center) 350 TV lines (at Center) Internal Synchronization (2:1 interlaced) Auto or Manual Adjustment 1/60, 1/100 Auto/Lock Available OUTPUT SIGNALS Video Signal Composition Video Output Impedance Video Output Signal Level Stereo Audio Output Impedance (R,L) NTSC standard color video signal: RCA pin jack (yellow) Y/C separate signal: S (Y/C separation) terminal 75 Ohms 1Vp-p (luminance signal) (Audio Mute switch available) 1 k ohm approximately RCA pin jack STEREO AUDIO INPUT SIGNALS Microphone Input Input Impedance Minijack ø 3.5mm 5 k ohm approximately (No microphone power) LENS Focal Length Focus Normal Aperture Ratio Zoom Iris Control 2.9 mm Manual (8mm ~ infinite) F2.8 Fixed Manual (F2.8 ~ F16) VIEW ANGLE Nominal Angle of View (Designed Value) Horizontal 63 degree 39' Vertical 49 degree 56' Diagonal 75 degree 33' MOVABLE CAMERA ANGLE Pan Angle Tilt Angle Rotatable Camera Head Plus or minus 90 degree, pivot on the base 3 joint arm Greater than 180 degrees DOCUMENT SIZE Min: Postage Stamp Size Max: Letter Size (8 1/2" x 11") CONTROL SWITCHES Power On/Off Switch White Balance Adjust Knob Auto White Balance On/Off Negative/Positive Switch Audio mute On/Off AGC Lock (On/Off) Electronic Shutter Switch DISPLAY LAMPS Power Lamp White Balance Audio Mute AGC Lock (On/Off) POWER Input Power Power Consumption OTHER SPECIFICATIONS Operating Temperature Operating Humidity Stored Dimensions Weight Accessories Certification RF Emission Black Seesaw Switch Volume Knob Alternative On/Off Control Alternative On/Off Control Alternative On/Off Control Alternative On/Off Control Slide Switch Green Led Green Led Green Led Green Led 12 VDC AC adapter PA-V6 120VAC/60Hz 7W 41° F -95° F 20%-85% 6"(w) x 15"(H) x 8.5"(D) Approximately 5 Ibs. AC adapter (PA-V6) x1 Pin Cable x1 UL1310 (only for AC adapter) FCC Class B VIZCAM'S CONTROL PANEL FEATURES USER-FRIENDLY FUNCTIONS: Power On/Off AGC Lock On/Off Lock the image brightness level or adjust brightness automatically. Negative/Positive Button - Negative film material can be converted and viewed as a positive image Audio Mute On/Off - when captured with When an auxiliary the camera with the microphone is connected negative/positive to the camera the sound switch active. can be active or muted. White Balance Adjust Knob - Electronic Shutter Switch - Due to variable lighting conditions Is utilized if there is problems it might be best to manually with screen flicker. The adjust the white balance to switch should be set to reproduce clear accurate the appropriate power color reproduction. frequency where By placing the the camera is Auto WB in the installed. off position the user can then manually adjust for correct color reproduction. - In areas with 60 Hz power: Set the selector to 1/60. (US users should leave the switch Auto White Balance Button (On/Off) - The auto white balance feature set to 1/60). of the camera will automatically try to produce accurate color reproduction - In areas with 50 hz of images being captured. Basically the camera will try its best to power: Set the selector accurately reproduce clear accurate whites, reds, blues, and greens. to 1/100. For purchase and technical assistance call 516-328-5960. For literature and the dealer nearest you, call 1-800-OK CANON. E-mail us at: [email protected] Visual Communication Systems Division All specifications subject to change without notice. Canon is a registered trademark of Canon, Inc. ©1997 Canon USA, Inc.