Canon Wireless File Transmitter WFT-E4 II A WFT-E4 II Instruction Manual - Page 91
Connecting GPS Devices via Bluetooth
View all Canon Wireless File Transmitter WFT-E4 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Connecting GPS Devices via Bluetooth By attaching the Canon Bluetooth Unit BU-30 to the USB port, you can connect Bluetooth® GPS devices wirelessly. (Bluetooth® devices other than GPS devices cannot be connected). When using non-Canon Bluetooth units, confirm normal operation before use. Turn off the GPS device and camera before attaching the Bluetooth unit to the transmitter. The transmitter's USB port is not hot-pluggable. Bluetooth units cannot be connected or disconnected indiscriminately. Follow the instructions in this section when attaching or detaching Bluetooth units. 1 Attach the Bluetooth unit. Open the port cover and attach the Bluetooth unit. 2 In [WFT settings], select [USB device connec.] If you will not use a wireless or wired LAN at the same time as the Bluetooth unit, set [Communication mode] to [Disconnect]. 3 Select [Bluetooth]. 4 Select [Connect]. When replacing the transmitter battery, always set the camera's power switch to before opening the transmitter battery compartment cover. If the transmitter battery compartment cover is opened without setting the camera's power switch to , you will need to reestablish the connection to the Bluetooth unit. 91