Canon Wireless Transmitter WFT-E6A Instruction Manual - Page 110
Cannot connect to slave camera, Could not synchronize the time
View all Canon Wireless Transmitter WFT-E6A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Responding to Error Messages 71: Cannot connect to slave camera Are you following the correct procedure to establish the connection with slave cameras? X Operate slave cameras by following the correct instructions (p.66, 67). Are the slave cameras too far from the master camera? X Bring the slave cameras closer to the master camera. 72: Cannot connect to master camera Are you following the correct procedure to establish the connection with master camera? X Operate the master camera by following the correct instructions (p.66, 67). Is the master camera too far from the slave cameras? X Bring the master camera closer to the slave cameras. 73: Could not synchronize the time Are you following the correct procedure to establish a connection between the master and slave cameras? X Operate the master and slave cameras by following the correct instructions (p.90, 91). Are the master and slave cameras too far apart? X Bring the master and slave cameras closer together. 82: Wireless File Transmitter not connected Is the transmitter attached correctly? X Make sure the transmitter is securely inserted in the camera (p.10). 91: Other error Another problem has occurred, identified with an error number other than 11 to 82. X Turn the camera's power switch off and on. 110