Canon XSI Kit EOS DIGITAL REBEL XSi/EOS 450D Instruction Manual - Page 138
Set the printing effects.
UPC - 013803096095
View all Canon XSI Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
wPrinting 4 Set the printing effects. Set as necessary. If you need not set any printing effects, go to step 5. Select the option on the upper right, then press . Select the desired printing effect, then press . If the icon is displayed next to , you can also adjust the printing effect. (p.140) Printing Effect Description EOff Same as the printing characteristics turned "On". No automatic correction will be performed. EOn The image will be printed according to the printer's standard colors. The image's Exif data is used to make automatic corrections. EVivid The image will be printed with higher saturation to produce more vivid blues and greens. ENR The image noise is reduced before printing. 0 B/W Prints in black-and-white with true blacks. 0 Cool tone Prints in black-and-white with cool, bluish blacks. 0 Warm tone Prints in black-and-white with warm, yellowish blacks. zNatural Prints the image in the actual colors and contrast. No automatic color adjustments will be applied. zNatural M The printing characteristics are the same as the "Natural" setting. However, this setting enables finer printing adjustments than with "Natural." EDefault The printing will differ depending on the printer. For details, see the printer's instruction manual. * The screen display may differ depending on the printer. * When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 140. 138