Canon iP1800 Easy Setup Instructions - Page 1
Canon iP1800 - PIXMA Color Inkjet Printer Manual
UPC - 013803078084
View all Canon iP1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
QT50918V01 Unpack the Printer Start Here Easy Setup Instructions • Please confirm the included items against the illustration printed on the lid of the packing box. • A USB cable is necessary to connect the printer with your computer. 1 Prepare the Printer Note When moving the printer, carry the printer at both ends as shown below. d Plug the power cord in the back of the printer and connect the other end to the wall outlet. Power Cord 2 Install the FINE Cartridges a Remove the Color FINE Cartridge from its box. Photo Printer d Push up the FINE Cartridge until it clicks into place. Important For correct printer operation, make sure the FINE Cartridge is secure in slots. Click a Place the printer on a flat and horizontal surface, and do not place any objects in front of the printer. Pull up the Shipping tape on the top of the printer, and remove it together with the Protective Sheet. Remove all the rest of the Protective Sheets. Then open the Paper Support. Note Do NOT connect the USB cable at this stage. e Press the POWER button to turn on the printer. The printer will initialize. Wait until the POWER lamp stops flashing and remains lit green. b Remove the Protective Tape gently. To the FINE Cartridge Holder Protective Tape Electrical Contacts e Repeat the procedure for the Black FINE Cartridge, inserting it into the left slot B . b Open the Front Cover, then remove the Protective Material on the right side. f Open the Front Cover. The FINE Cartridge Holder automatically moves to the left. Protective Material Caution Before turning on the printer, remove all of the shipping tapes. c Close the Front Cover. Serial Number g Write down the serial number located inside the printer. You will need this to register your product. Print Head Nozzles Note • Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The printer may not print out properly if you touch it. • Do not reattach the Protective Tape once you have removed it. • Be careful not to stain your hands or surrounding work area with ink on the removed Protective Tape. c Insert the Color FINE Cartridge slightly slanted into the right slot C. f Close the Front Cover. Important Once you have installed the FINE Cartridges, the POWER lamp will flash green. Wait for about one to two minutes, until the POWER lamp stops flashing and remains lit green and the printer has stopped making operating noises, before proceeding. Hardware setup is complete.