Canon iP3000 iP4000 Quick Start Guide - Page 74
End of Job - printer driver windows 7
UPC - 013803037807
View all Canon iP3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Troubleshooting Problem Cannot Print to End of Job Possible Cause Incorrect page size is selected Try This Ensure that the page size setting matches the size of the paper loaded in the printer: z Check the Paper Size setting from within your application to ensure that it matches the size of the paper loaded. z Check Paper Size on the Page Setup tab in the Printer Properties dialog box of the printer driver (Windows) or the Page Setup dialog box of the printer driver (Macintosh) to ensure that it matches the size of the paper loaded. There is not enough Your operating system may be out of free disk space. free space on the Check the available space on your computer's hard disk. hard disk The size of the print data is too large Check the size of the print data. For Windows XP and Windows 2000, if the size of the data is too large, part of it may be lost. When the spool format is EMF, follow the procedure below. 1. Open the Printer Properties dialog box. 2. On the Main tab, click Print Options. 3. Select the Reduce spool data size check box, and click OK. Use reduced printing is not selected when performing automatic duplex printing When Reduce spool data size is set, the print quality may be degraded. In automatic duplex printing, the printable area at the top of the page is 2 mm/ 0.08 inches narrower than the usual area, therefore the bottom edge may not be printed. To prevent this, select Use reduced printing in the printer driver. Print layout may be altered with the reduced printing function. 1. Open the Printer Properties dialog box. 2. Click Print Area Setup in the Page Setup tab and select Use reduced printing. 1. In the Print dialog box, select Duplex Printing & Margin from the pop-up menu. 2. Select Automatic Duplex Printing, and select Use reduced printing in Print Area. 70