Canon iP3300 Easy Setup Instructions - Page 1
Canon iP3300 - PIXMA Color Inkjet Printer Manual
UPC - 013803066265
View all Canon iP3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Start Here Easy Setup Instructions Unpack the Printer • Please confirm the included items against the illustration printed on the lid of the packing box. • A USB cable is necessary to connect the printer with your computer. QT5-0406-V01 1 Prepare the Printer a Place the printer on a flat and horizontal surface, and do not place any objects in front of the printer. Open the Sheet Feeder Cover and pull out the Paper Support. Open the Front Feeder and extend the Output Paper Support. Caution Before turning on the printer, remove all of the shipping tapes. Important Do not connect the USB cable until after the software is installed. d Open the Top Cover. The Print Head Holder moves to the center. Top Cover 2 Install the Print Head a Remove the Print Head from its package. Caution There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. b Remove the orange protective cap from the Print Head and discard it. e Write down the serial number located inside the printer. You will need this to register your product. Electrical Contacts b Plug the power cord in the back of the printer and connect the other end to the wall outlet. Serial Number Location Protective Cap Print Head Nozzles Note Do not touch the print head nozzles and the electrical contacts. c Firmly raise the Print Head Lock Lever until it stops. 3 Install the Ink Tanks a Peel back the orange tab completely and remove the plastic wrapper from the ink tank. If the orange-colored protective film is not removed completely, problems with printing may occur. b Twist off and discard the orange protective cap located on the bottom of the ink tank. Do not press! Protective Cap Ink Port Electrical Contacts Important • Do not touch the electrical contacts. • Do not touch the ink port. c Insert the ink tank into the right-hand slot and press the mark on the ink tank until it clicks into place. Important Plug the power cord all the way in, since it may be difficult to plug. c Press the POWER button to turn on the printer. d Insert the Print Head. Do not touch! e Lower the Print Head Lock Lever carefully. d Make sure the ink lamp lights red. Insert all ink tanks in order from right to left according to the colored label. e Close the Top Cover. Important If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Top Cover to return the Holder to the center. Important • The printer starts operating. Wait about 2 minutes until the printer stops making noise. • When printing for the first or second time after setup, the printer will take a minute or two before it becomes ready to print. Note If the ALARM lamp on the printer flashes orange after you have closed the Top Cover, refer to "ALARM Lamp Flashes Orange" in "Troubleshooting" of the Quick Start Guide. Hardware setup is complete. series Photo Printer Loading Paper This printer offers two paper sources to load printing paper; the Auto Sheet Feeder, found at the top of the printer, and the Front Feeder, found at the front of the printer. Note • At purchase, the printer is set to feed from the Auto Sheet Feeder. For details on how to change the paper source, refer to "Basic Printing" of the Quick Start Guide. • You can load A4, Letter, or B5-sized plain paper in the Front Feeder. When using any other type of paper, load it in the Auto Sheet Feeder. Auto Sheet Feeder Front Feeder Loading Paper in the Auto Sheet Feeder a Load the paper in the Auto Sheet Feeder with the print side facing UP. b Align the paper stack against the Cover Guide on the right side of the Paper Support. c Pinch the Paper Guide and slide it against the left side of the paper stack. Paper Guide Print side facing UP. Cover Guide Loading Paper in the Front Feeder a Load the paper in the Front Feeder with the print side facing DOWN and the leading edge to the far side. b Align the right edge of the paper stack against the inner face of the Front Feeder, and the near and left edges with the Paper Size Mark. c Pinch the Paper Guide and slide it against the left side of the loaded paper stack. Paper Guide Print side facing DOWN. Note For details, refer to the Quick Start Guide.