Canon iPF510 iPF510 User Manual - Page 604
Adjusting the Feed Amount Manually, Adjust Band, Far Ed Feed
![]() |
UPC - 013803086232
View all Canon iPF510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 604 highlights
Adjusting the feed amount Adjusting the Feed Amount Manually If printed images are affected by banding in different colors, adjust the amount that paper is fed. This topic describes how to adjust the feed amount manually. When using highly transparent media for which automatic adjustment is not supported, adjust the feed amount manually. We recommend automatic adjustment for other types of media. For instructions on automatic adjustment, see "Adjusting the Feed Amount Automatically". (→P.587) Note • To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed at exactly the right length, for example), specify the amount of paper stretching or shrinkage when adjusting the feed amount. (→P.594) Important • Use paper of the same type and size for adjustment as you will use for printing. Follow the steps below to adjust the feed amount manually. 1. Load unused paper Letter-sized or larger. Two sheets are required when Adjust Band is selected, and one sheet is required when Adj Far Ed Feed is selected. • Loading Rolls on the Roll Holder (→P.114) • Loading Rolls in the Roll Feed Unit (→P.116) • Loading the Roll in the Printer (→P.117) • Loading Sheets in the Cassette (→P.152) • Loading Sheets Manually (→P.155) Note • Always select the paper type when loading paper. Using paper that you have not selected on the printer may cause feeding problems and affect the printing quality. (→P.146) (→P.112) (→P.147) 2. Print a test pattern and choose the adjustment value. (→P.591) There are two types of test pattern for adjusting the feed amount, as follows. With either type, you will follow the same steps in printing the pattern and choosing an adjustment value. • Test pattern for feed amount adjustment by adjusting bands ( Manual Band Adj > Adjust Band ) • Test pattern for adjusting the feed amount for the trailing edge ( Manual Band Adj > Adj Far Ed Feed ) Note • When you print test patterns on sheets, two sheets are required for the test pattern for band adjustment and one sheet for the test pattern for feed adjustment of the trailing edge. 590 Adjustments for Better Print Quality
![](/manual_guide/products/canon-ipf510-ipf510-user-manual-50d9832/604.png)