Canon iX7000 Network Setup Troubleshooting - Page 6

Changing the Port Name Note By changing the port name, you can change the name of the printer. • When you set up an additional computer to use the printer whose port name you changed, the printer is displayed with the changed port name. When two or more computers are set up, the changed name is displayed. When multiple computers or printers are present, this can be used to change the name to one that is easy to remember. Action The port name can be changed by the following procedure. 1 Click Set Port Name in the Setup Completion dialog box. • The Set Port Name dialog box is displayed. 2 Change the port name. • Port names should consist of alphanumeric characters and be no longer than 21 characters, excluding the prefix. • The port name includes the fixed prefix "CNBJNP_", which you do not need to enter. Restoring the Printer's Default LAN Setting to Perform Setup Again Action Use the RESUME/CANCEL button on the printer to restore the default state. 1 Disconnect the LAN cable. 2 Hold down the RESUME/CANCEL button (A) on the printer until the POWER lamp (B) flashes 10 times, then release the RESUME/ CANCEL button after the tenth flash. B A The LAN setting of the printer is now restored to the default state. • Perform setup again by following the procedures in "Wired LAN Connection" (Windows: P.23, Macintosh: P.32) and onward in the printed manual: Getting Started. TCP/IP setting Obtain an IP address automatically Printing the Printer's Network Setting Information Action Use the RESUME/CANCEL button on the printer to print the network setting information. 1 Hold down the RESUME/CANCEL B button (A) on the printer until the POWER lamp (B) flashes 6 times, then release the RESUME/ CANCEL button after the sixth A flash. Printing will start.