Canon imageCLASS 2300 Basic Guide for imageCLASS 2300 - Page 131
When Problems Occur during Fax Operations, Sending Documents - error code
View all Canon imageCLASS 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
When Problems Occur during Fax Operations If an error occurs during fax operations, check the following points. Sending Documents You cannot send a document after dialing. Cause 1 Is your machine set to the correct telephone line type (pulse or tone)? Remedy Check the telephone line type and set the machine to the correct type. Cause 2 Is your machine in copy mode? Remedy Press [FAX] to light the FAX indicator. Cause 3 Is the document set properly? Remedy Reset the document and try sending again. Troubleshooting Cause 4 Did you dial the right telephone number? Remedy Try dialing the number again. If the number is registered for one-touch or coded speed dialing, check that the number is correct. Cause 5 Is the other party's fax machine out of paper? 10 Remedy Contact the other party to check whether their fax machine is out of paper. Cause 6 Is the other party's line busy with sending, receiving, or a voice call? Remedy Contact your carrier to check whether the line is busy or not. Memory fills up immediately when you try to send. Cause 1 Are you sending with the resolution set to 'SUPER FINE' or 'ULTRA FINE', or image quality set to 'PHOTO' or 'TEXT/PHOTO'? Remedy 1 If your document does not contain fine text or photographs, set the resolution to 'STANDARD' and image quality to 'TEXT'. Remedy 2 If your document contains fine text or photographs, send it directly rather than using a memory transmission. 10-8 When Problems Occur during Fax Operations