Canon imageCLASS MF236n imageCLASS MF249dw/MF247dw/MF236n User Guide - Page 305
Changing Print and Fax Settings, Changing the Setting of Functions Available with AirPrint
View all Canon imageCLASS MF236n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Can Be Used Conveniently with a Mobile Device Enter the name and the installation location information to help you identify this machine when operating your Apple device. This information is useful if you have more than one AirPrint printer. Also select whether to give priority to print speed or to print quality. If you select the [Use AirPrint] check box The following items are also set to automatically. ● for IPv4 and IPv6 Configuring DNS(P. 377) ● Disabling HTTP Communication (P. 422) ● [Use IPP Printing] under [IPP Print Settings] Changing the Setting of Functions Available with AirPrint(P. 297) ● Changing the Setting of Functions Available with AirPrint(P. 297) If you change [Printer Name] ● If you change [Printer Name] that you have once specified, you may be unable to print any more from the Mac that has been able to be used for printing so far. This phenomenon occurs because ( Configuring DNS(P. 377) ) of IPv4 is also changed automatically. In this case, add the machine to the Mac again. ◼ Changing the Setting of Functions Available with AirPrint If you want to disable functions that you are not going to use with AirPrint or encrypt communications, configure the necessary setting using the operation panel or Remote UI. Changing Print and Fax Settings To perform printing or fax sending with AirPrint, IPP protocol is used. Turning the function On/Off You can specify whether to perform printing and fax sending with AirPrint. The factory default setting is [On]. Log on to the Remote UI in System Manager Mode ( Starting Remote UI(P. 449) ) [Settings/Registration] [Network Settings] [TCP/IP Settings] Settings] [Edit] Clear or select the [Use IPP Printing] check box [OK] [IPP Print Changing the TLS setting You can specify whether to encrypt communications using TLS when performing printing or sending faxes with AirPrint. The factory default setting is [On]. ● When the machine is connected to a Mac via USB, set [Use TLS] to [Off]. Log on to the Remote UI in System Manager Mode ( Starting Remote UI(P. 449) ) [Settings/Registration] [Network Settings] [TCP/IP Settings] Settings] [Edit] Clear or select the [Use TLS] check box [OK] [IPP Print 297