Canon imageCLASS MF4570dw Wireless LAN Setting Guide - Page 6

Setting the wireless LAN Step4-A Setting the Machine Using the WPS (Push Button Mode) Follow this procedure only if you selected Step4-A "Setting the Machine Using the WPS (Push Button Mode)" on the previous page. 1. Make sure the procedure "Step2 Switching the 6. Press [ ] or [ ] to select, and press [OK]. Connection Method to Wireless LAN" (P.1-2) is completed. Wireless LAN Settings WPS Push Button Mode WPS PIN Code Mode 2. Press [ ] (Menu). SSID Settings Wireless LAN Informa... 3. Press [ ] or [ ] to select, and press [OK]. Menu Network Settings Preferences Timer Settings Common Settings 7. Press [ ] to select, and press [OK]. Do you want to connect with new settings? Yes No The next screen is displayed for approximately 5 seconds. You do not need to turn the machine OFF and ON at this stage. Settings effective after power is turned OFF and ON. 8. Within 2 minutes, press and hold the WPS button on the wireless LAN router or access point for approximately 5 seconds. Searching... Press the access point WPS button. Cancel: Press Stop  4. Press [ ] or [ ] to select, and press [OK]. Network Settings Select Wired/Wirele... Wireless LAN Setting TCP/IP Settings SNMP Settings 5. Press [OK]. See Wireless LAN Setting Guide to perform settings. OK 1-4 Connecting... Cancel: Press Stop If "Cannot find access point" is displayed. Press [OK] to close the screen and resume from Step 6.