Canon imageCLASS MF7280 imageCLASS MF7280 Sending Guide - Page 315

# 0703 Cause The memory for image data is full when sending color documents. Remedy 1 Wait a few moments, and then try sending again after other send jobs are complete. Remedy 2 Erase documents stored in memory. If the machine still does not operate normally, turn the main power OFF, and then back ON. # 0705 Cause The send operation was interrupted because the size of the image data is larger than the Maximum TX Data Size set in E-mail/I-Fax in Communications Settings in System Settings (from the Additional Functions screen). Remedy 1 Change the setting for the Maximum TX Data Size in E-mail/I-Fax in Communications Settings in System Settings (from the Additional Functions screen). Remedy 2 Select a lower resolution. Remedy 3 If you are using I-fax, decrease the number of pages containing images that you are sending each time, so that you do not exceed the Maximum TX Data Size. Remedy 4 Set Divide into Pages to 'On' in the File Format screen. # 0751 Troubleshooting Cause The server is not functioning. The network is down (the server is unable to connect to the network or was disconnected). Remedy Check the recipient's address. Check that the network is up. 11 # 0752 Cause The SMTP server name for e-mail or I-fax is not correct, or the server is not functioning. The domain name or e-mail address may not be set. The network is down. Remedy Check the SMTP Server name, domain name, and E-mail Address in E-mail/ I-Fax in Network Settings in System Settings (from the Additional Functions screen). Check that the SMTP server is operating properly. Check the network status. Error Messages 11-9