Canon imageCLASS MF7280 imageCLASS MF7280 Facsimile Guide - Page 81
Original Type Selection, Place your originals, specify the destination.
View all Canon imageCLASS MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Original Type Selection You can manually select the original type according to the type of image that you are scanning. The following three original type modes are available for adjusting the image quality. IMPORTANT • Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one of these modes, the previously set mode is canceled. • If you scan an original containing halftones, such as a printed image, using the Photo mode, the moiré effect (a shimmering, wavy pattern) may occur. In this case, you can 2 lessen the moiré effect by adjusting the scanning contrast (sharpness). (See Chapter 7, "Customizing Communications Settings," in the Sending Guide.) Send and Receive Methods NOTE • If you select the automatic density adjustment mode, the original type setting is disabled. • If the original is a transparency, select the original type ➞ adjust the density to the most appropriate level for the original. • The default setting is 'Text'. ■ Text Mode This mode is best suited for scanning text originals. Blueprints or pencil drawn originals can also be scanned clearly. ■ Text/Photo Mode This mode is best suited for scanning originals containing both text and images/photos, such as magazines or catalogues. ■ Photo Mode This mode is best suited for scanning images from photos printed on photographic paper, or scanning images printed with halftone dots. 1 Place your originals ➞ specify the destination. NOTE • For instructions on placing your originals, see "Placing Originals," on p. 1-34. • For more information on specifying the destination, see "Dialing Methods," on p. 2-35. Scan Settings 2-13