Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 316

Message LTR Load paper. No response. (imageCLASS MF7480/ MF7470 Only) No response from the server. Check the settings. (imageCLASS MF7480/ MF7470 Only) Out of resources. Wait for a moment, then perform operation again. (imageCLASS MF7480/ MF7470 Only) Description The optimum paper size selected by the Automatic Paper Selection mode is not available in the machine. - The server was not running when you tried to send. - The network connection was lost when you tried to send. (Either you could not connect to the destination or the connection was lost before the job could complete.) - A TCP/IP error occurred when you tried to send an e-mail or I-fax. The specified server settings are incorrect, or the server is not turned ON. Alternatively, the machine's TCP/IP resources may be low. You cannot browse the network due to a lack of TCP/IP resources. This may be because documents have just been continuously sent or are being continuously sent through FTP or Windows (SMB). Action - Load the indicated paper size into the machine. If you press (Start) while this message is displayed, prints are made with the currently selected paper size. - When the message continues to be displayed even if the indicated paper size is loaded, set Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) for that paper drawer to [On]. (See "Automatic Paper Selection/Automatic Drawer Switching," on p. 2‑25.) - Check the destination. - Check the status of the network. - Check that the network cables and connectors are properly connected. Wait for a while, and try browsing again. If you still fail, try selecting another server. Wait for a while, and try browsing again. Troubleshooting 11‑19