Canon imageCLASS X LBP1238 II Users Guide - Page 35
Testing the Network Connection, Restarting the MachineP. 87
View all Canon imageCLASS X LBP1238 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Setting Up If you do not want to use DHCP/BOOTP/RARP to assign an IP address ● Select . If you select when these services are unavailable, the machine will waste time and communications resources searching the network for these services. 3 Check that is set to . ● If is selected, change the setting to . 4 Select . ● IP addresses assigned via DHCP override the address obtained via Auto IP. Manually entering an IP address 1 Configure a setting to disable auto-acquisition. ● Select , and select in . 2 Select . 3 Specify the IP address, subnet mask, and gateway address (or default gateway). ● Enter , , and , and select . 5 Select . 6 Restart the machine. Restarting the Machine(P. 87) Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer ( Starting Remote UI(P. 240) ). If a computer is not available, you can check the connection by using the operation panel ( Testing the Network Connection(P. 29) ). When you have changed the IP address after installing the printer driver ● You need to add a new port. Configuring Printer Ports(P. 40) Testing the Network Connection 1 Select in the Home screen. Home Screen(P. 91) 2 Select . ● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 102) 29