Canon imageFORMULA CR-120N CR-120/150 User Guide - Page 5
Preparation Before Use, Setting Up the Scanner
View all Canon imageFORMULA CR-120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Preparation Before Use This chapter describes how to prepare the scanner to scan documents. Setting Up the Scanner Perform the following steps to set up the CR-150/CR-120. Refer to the section for each step for details about that step. A Check your operating environment. (See "Checking Your Operating Environment" on p. 6.) B Install the software. (See "Installing the Software" on p. 7.) Install the Scanning Utility provided with the CR-150/CR-120. C Connect the scanner to a computer. (See "Connecting the Scanner to a Computer" on p. 8.) D Turn ON the power. (See "Turning ON the Power" on p. 10.) E Automatically installing the device driver. (See p. 10.) The device driver is installed automatically when Windows recognizes the CR-150/CR-120. IMPORTANT • To have the device drivers installed automatically when the computer recognizes the CR-150/CR-120, the software needs to be installed before the CR-150/CR-120 is connected to the computer. • If you connect the computer and turn ON the CR-150/CR-120 before installing the software, the following wizard screen appears. If this happens, click [Cancel], turn OFF the CR-150/CR-120, and then install the software. The following wizard screen is an example in Windows 7. When a similar wizard screen appears in Windows 8.1/10, click [Cancel]. Wizard Screen (Windows 7) 5