Canon imageFORMULA CR-135i imageFORMULA CR-135i / CR-190i Instructions Manual - Page 2
Connecting the Scanner to a Computer, Install the software, Turn ON the power
![]() |
View all Canon imageFORMULA CR-135i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Connecting the Scanner to a Computer Connect the CR-135i/CR-190i to a computer as follows. Make sure to install the software before connecting the scanner to a computer. • If you connect the computer and turn ON the CR-135i/CR-190i before installing the software, the following wizard screen appears. If this happens, click [Cancel], turn OFF the CR-135i/CR-190i, and then install the software. The following wizard screen is an example in Windows Vista. When a similar wizard screen appears in Windows XP/7, click [Cancel]. A Install the software Install the Scanning Utility for CR-135i/CR-190i in the setup disc provided with the CR-135i/CR-190i. (See "Installing the Software," on p. 19.) B Connect the scanner to a computer Connect the CR-135i/CR-190i and the computer with a USB. (See "Connecting the Scanner to a Computer," on p. 20.) C Turn ON the power Turn ON the power of the CR-135i/CR-190i. (See "Turning ON the Power," on p. 21.) D Automatically installing the device driver The device driver is installed automatically when Windows recognizes the CR-135i/CR-190i as new hardware. (See p. 22.) Wizard Screen (Windows Vista) 2
![](/manual_guide/products/canon-imageformula-cr135i-imageformula-cr135i-cr190i-instructions-manual-8f0d049/2.png)