Canon imageFORMULA CR-135i imageFORMULA CR-135i / CR-190i Operation and Mainte - Page 23

3 Push the ink cartridge backward, and then remove the ink cartridge. 5 Push down the ink cartridge until it clicks into place. CAUTION Do not touch the ink jet nozzle right after imprinting. The nozzle may be very hot. 4 Place the ink cartridge shown in the diagram below. IMPORTANT Make sure that the ink cartridge is securely in place. 6 Squeeze the Print Position Adjustment Lever and move it to adjust the print position. CAUTION Do not touch the electrical contact on the carriage. Doing so may cause a malfunction. NOTE Do not use more than one cartridge by rotation. If you do so, applications cannot check the ink level precisely. Top: 1.92" (48.8 mm) from the bottom edge of the document Bottom: 1.17" (29.6 mm) from the bottom edge of the document 23