Canon imageFORMULA DR-2010C User Manual - Page 38
ISIS/TWAIN Driver Properties Dialog Box
View all Canon imageFORMULA DR-2010C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Contents Back Previous Page Next Page NOTE If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners, reinstall the ISIS/TWAIN driver. (See "Chapter 2 Setup - 2. Installing the Software," on p. 12) 4 Select the default page size from the drop-down list → click [OK]. 22..ISISISIS/T/WTWAIANIDNriDverrivPerropPerrotipeesrDtiaelsogDBiaolxog Box The ISIS/TWAIN driver properties dialog box is displayed when you select [Scanner Setting] on the [Scan] menu of CapturePerfect 3.0. It consists of four tabs: the [Basic] tab, [Brightness] tab, [Image processing] tab, and [Others] tab. Specify the settings on each tab as necessary to set the scanning conditions. For details on each setting, also refer to the Help. NOTE • The [Configure Device Settings] dialog box is displayed only when you select [Canon DR-2510C] or [Canon DR-2010C] for the first time and click [OK], or when you click [Setup] for [Scanner Selection]. • The settings here are applied when you click the [Default] button on the ISIS driver properties dialog box. • For a TWAIN driver, the default value is set to "LTR" and cannot be changed. 5 From the [Scan] menu, select [Scanner Setting]. The ISIS/TWAIN driver properties dialog box is displayed. [OK] button Confirms the settings and closes the dialog box. [Scan] button For a TWAIN compatible application that can perform scanning from the properties dialog box, the [Scan] button is displayed instead of the [OK] button. Press the [Scan] button to scan with the displayed settings. [Cancel] button Cancels the settings and closes the dialog box. [Default] button Returns the settings to their default values. [Help] button Displays Help for the currently open tab or dialog box. 38 DR-2010C / DR-2510C