Canon imageFORMULA R50 Setup Guide for - Page 1

Canon imageFORMULA R50 Manual

Get Canon imageFORMULA R50 PDF manuals and user guides View all Canon imageFORMULA R50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Load the document     Setup Guide Check the included items Load the documents facedown and the top edge first. 1 Remove the protective material    Setup Disc is not included.  2 Install Software IMPORTANT Do not connect the scanner to the computer before installing the software. 1 Download the software. https://software.canon-elec.co.jp/ims/r50/ Scanning from the Scanner Touch Panel You can scan using pre-configured jobs via the touch panel of the scanner. CaptureOnTouch must be running on the PC. 1 Tap (Scan) on the touch panel home screen. Adding preference scan setting 1 Click [New One Touch button].  2 Tap the job you want to execute , and then tap (Start) . Job List 0  01:Scan double-sided 02:Scan single-sided 03:  Start 04: 3 Check the scanned image and click the [Finish] button. 2 Click . Right-clicking the selected One Touch button allows you to change the name of the button. 3 Assign an One Touch button to a job number. 2 Execute the downloaded software and follow the on-screen instructions. Troubleshooting Wi-Fi Setup • Are the SSID and the password entered correctly? The SSID and the password are case sensitive. • The scanner can only connect to a network that supports 2.4 GHz connections. Make sure the access point that is currently connected supports 2.4 GHz band, or the scanner is connected to the network at 2.4 GHz band. • Connect the scanner to the same network as the computer and the access point are connected. • Turn both this scanner and the access point off and back on, and attempt the Wi-Fi connection again. • When an access point's stealth function is enabled, it cannot be detected during Wi-Fi setup. Disable the stealth function or use manual setup to enter the correct SSID of the access point. 6T3-0117-01 XXXXXXXX © CANON ELECTRONICS INC. 2020 PRINTED IN JAPAN 6T3-0117-01.indd 1 Check, delete, and edit images. Click in the upper right of the screen for the usage details. The registered job appears on the Job List screen. Job List 0 01:Scan double-sided 02:Scan single-sided 03:Save to folder 04: Start 5/15/2020 午前 11:16:46

  • 1
  • 2
Scanning from the Scanner Touch Panel
You can scan using pre-configured jobs via the touch panel of the scanner.
CaptureOnTouch must be running on the PC.
Tap
(Scan) on the touch panel home screen.
Tap the job you want to execute
, and then tap
(Start)
.
04:
03:
02:Scan single-sided
01:Scan double-sided
Start
Job List
0
Check the scanned image and click the [Finish]
button.
Check, delete, and edit images.
Click
in the upper right of the screen for the usage details.
Adding preference scan setting
Click [New One Touch button].
Click
.
Right-clicking the selected One Touch button allows you to change the
name of the button.
Assign an One Touch button to a job number.
The registered job appears on the Job List screen.
04:
03:Save to folder
02:Scan single-sided
01:Scan double-sided
Start
Job List
0
1
2
3
1
2
3
Check the included items
Setup Disc is not included.
Remove the protective material
1
Load the document
Load the documents facedown and
the top edge first.
Install Software
Download the software.
Execute the downloaded software and follow the on-screen instructions.
2
IMPORTANT
Do not connect the scanner to the computer
before installing the software.
1
2
Troubleshooting Wi-Fi Setup
• Are the SSID and the password entered correctly? The SSID and the
password are case sensitive.
• The scanner can only connect to a network that supports 2.4 GHz
connections. Make sure the access point that is currently connected
supports 2.4 GHz band, or the scanner is connected to the network at 2.4
GHz band.
• Connect the scanner to the same network as the computer and the access
point are connected.
• Turn both this scanner and the access point off and back on, and attempt
the Wi-Fi connection again.
• When an access point’s stealth function is enabled, it cannot be detected
during Wi-Fi setup. Disable the stealth function or use manual setup to
enter the correct SSID of the access point.
6T3-0117-01
XXXXXXXX
© CANON ELECTRONICS INC. 2020
PRINTED IN JAPAN
Setup Guide
6T3-0117-01.indd
1
5/15/2020
午前 11:16:46