Canon imageFORMULA ScanFront 300 ScanFront 300/300P Operation Guide - Page 26
Placing a Card, IMPORTANT, CAUTION
View all Canon imageFORMULA ScanFront 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
❏ Placing a Card When you want to scan a card, follow the procedure below to place the card. 1. Move the feed selection lever upward (OFF). IMPORTANT When scanning cards, set the feed selection lever to OFF and make sure to scan the cards one at a time. 2. Adjust the document guides to match the width of the card. CAUTION • A card placed into the document feed tray in the portrait orientation may not be output properly because a load is placed on it during feeding. Furthermore, removing a card that has caused a feeding error may damage the card, so make sure to correctly insert the card. • Pull the lock lever and open the panel unit before removing a placed card. Inserting a finger into the scanner while the panel unit is closed may result in an injury. 3. Place the card face down with the top edge at the bottom of the tray. Lock lever 2-8