Canon imageFORMULA ScanFront 300 ScanFront 300/300P Setup Guide - Page 22
Configuring the Date and Time and Confirming the Time Zone, The [Device Configuration] screen appears.
View all Canon imageFORMULA ScanFront 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
❏ Configuring the Date and Time and Confirming the Time Zone When you finish configuring the network settings, log in to the Web Menu to set the date and time and confirm the time zone. For details on other settings, refer to the Operation Guide and ScanFront 300/300P INSTRUCTIONS (electronic manual). IMPORTANT Make sure that the time zone is set to your region of use. If the time zone is set to the wrong region, the recorded sending times and time stamps for image files will not match the time setting displayed on the scanner. 1. Turn the scanner ON. 2. Log in to [Administrator setting], open the network settings, and confirm the IP address. (See "Network Settings" on p. 14.) 3. Launch the Web browser on the computer. 4. Enter the device name or the IP address as the URL to open the Web Menu. Ex.) http://scanfront300 when the device name is ScanFront300, and http://172.19.xxx.xxx for the IP address. 5. Click [Login] to log in to the Web Menu (Administrator Mode). Hint No administrator password is set by default. If you set a password under the administrator settings, enter the password to log in. (See p. 13.) 6. Click [Device Configuration]. Hint If the Web Menu does not appear in the desired language, select the desired language in the [Language] box to switch the Web Menu display. The [Device Configuration] screen appears. 16